Joining with a thread that has previously been joined results in undefined behavior.
This example plugin performs the same join to the same thread a few
lines later. ASAN keeps track of this and fails.
Make the behaviour defined by joining only once.
Thanks Vladislav Vaintroub for looking up the behaviour.
While here;
* init/deinit function argument was actually used.
* correct code comments
* attribute define not needed
Thanks Marko Mäkelä for review and suggesting other
fixes.
Do not exporting mysqld entry points directly.
This is needed for mariabackup, to load encryption plugins on Windows.
All plugins are "pure" by default. To mark plugin "impure"
it should use RECOMPILE_FOR_EMBEDDED or STORAGE_ENGINE keyword.
MYSQLD.
DESCRIPTION
===========
Crash occurs when daemon_example plugin is uninstalled
immediately after its installed. This can be reproduced
by installing and uninstalling the plugin repeatedly.
ANALYSIS
========
The daemon_example_plugin_deinit() function of the daemon
example plugin calls pthread_cancel() but doesn't wait for
the worker thread to actually complete before deallocating
the data buffer and closing the file that it writes to.
This is causing SEGFAULT!
FIX
===
Added a pthread_join() to wait for the thread to complete
before doing the cleanup work.
Removed a stray 'x' variable from the example code.
NOTE
====
Have made an entry in .opt file as given below:
--plugin-dir=$DAEMONEXAMPLE_DIR
This is done so that the program takes plugin directory as
../<dbg>/plugin/daemon_example/ instead of
../lib/plugin/
mysql-test/suite/innodb/t/group_commit_crash.test:
remove autoincrement to avoid rbr being used for insert ... select
mysql-test/suite/innodb/t/group_commit_crash_no_optimize_thread.test:
remove autoincrement to avoid rbr being used for insert ... select
mysys/my_addr_resolve.c:
a pointer to a buffer is returned to the caller -> the buffer cannot be on the stack
mysys/stacktrace.c:
my_vsnprintf() is ok here, in 5.5
- Mark test components, plugins etc with COMPONENT Test, to get them excluded from the MSI
- Only include debug symbols for client and embedded libs and also
mysqld.exe and server plugins (so we can still can get a callstack in case of crash)
The rest (all *.pdbs, test components, MTR) can be obtained from the big ZIP distribution, if required.
The autotools-based build system has been superseded and
is being removed in order to ease the maintenance burden on
developers tweaking and maintaining the build system.
In order to support tools that need to extract the server
version, a new file that (only) contains the server version,
called VERSION, is introduced. The file contents are human
and machine-readable. The format is:
MYSQL_VERSION_MAJOR=5
MYSQL_VERSION_MINOR=5
MYSQL_VERSION_PATCH=8
MYSQL_VERSION_EXTRA=-rc
The CMake based version extraction in cmake/mysql_version.cmake
is changed to extract the version from this file. The configure
to CMake wrapper is retained for backwards compatibility and to
support the BUILD/ scripts. Also, a new a makefile target
show-dist-name that prints the server version is introduced.
VERSION:
Add top-level version file.
cmake/mysql_version.cmake:
Get version information from the top-level VERSION file.
Do not cache the version components (MAJOR_VERSION, etc).
Add MYSQL_RPM_VERSION as a replacement for MYSQL_U_SCORE_VERSION.
The autotools-based build system has been superseded and
is being removed in order to ease the maintenance burden on
developers tweaking and maintaining the build system.
In order to support tools that need to extract the server
version, a new file that (only) contains the server version,
called VERSION, is introduced. The file contents are human
and machine-readable. The format is:
MYSQL_VERSION_MAJOR=5
MYSQL_VERSION_MINOR=5
MYSQL_VERSION_PATCH=8
MYSQL_VERSION_EXTRA=-rc
The CMake based version extraction in cmake/mysql_version.cmake
is changed to extract the version from this file. The configure
to CMake wrapper is retained for backwards compatibility and to
support the BUILD/ scripts. Also, a new a makefile target
show-dist-name that prints the server version is introduced.
- Changed to still use bcmp() in certain cases becasue
- Faster for short unaligneed strings than memcmp()
- Bettern when using valgrind
- Changed to use my_sprintf() instead of sprintf() to get higher portability for old systems
- Changed code to use MariaDB version of select->skip_record()
- Removed -%::SCCS/s.% from Makefile.am:s to remove automake warnings
Introduce a MySQL maintainer/developer mode that enables
a set of warning options for the C/C++ compiler. This mode
is intended to help improve the overall quality of the code.
The warning options are:
C_WARNINGS="-Wall -Wextra -Wunused -Wwrite-strings -Werror"
CXX_WARNINGS="$C_WARNINGS -Wno-unused-parameter"
Since -Wall is essentially a moving target, autoconf checks
are not run with warning options enabled, in particualr -Werror.
This decision might be revisited in the future. The patch also
fixes a mistake in the makefiles, where automake CXXFLAGS would
be set to CFLAGS.
config/ac-macros/maintainer.m4:
Add a set of default compiler flags used when in maintainer mode.
configure.in:
Hook into the maintainer mode. Disabled by default.
Introduce a MySQL maintainer/developer mode that enables
a set of warning options for the C/C++ compiler. This mode
is intended to help improve the overall quality of the code.
The warning options are:
C_WARNINGS="-Wall -Wextra -Wunused -Wwrite-strings -Werror"
CXX_WARNINGS="$C_WARNINGS -Wno-unused-parameter"
Since -Wall is essentially a moving target, autoconf checks
are not run with warning options enabled, in particualr -Werror.
This decision might be revisited in the future. The patch also
fixes a mistake in the makefiles, where automake CXXFLAGS would
be set to CFLAGS.
Essentially, the problem is that safemalloc is excruciatingly
slow as it checks all allocated blocks for overrun at each
memory management primitive, yielding a almost exponential
slowdown for the memory management functions (malloc, realloc,
free). The overrun check basically consists of verifying some
bytes of a block for certain magic keys, which catches some
simple forms of overrun. Another minor problem is violation
of aliasing rules and that its own internal list of blocks
is prone to corruption.
Another issue with safemalloc is rather the maintenance cost
as the tool has a significant impact on the server code.
Given the magnitude of memory debuggers available nowadays,
especially those that are provided with the platform malloc
implementation, maintenance of a in-house and largely obsolete
memory debugger becomes a burden that is not worth the effort
due to its slowness and lack of support for detecting more
common forms of heap corruption.
Since there are third-party tools that can provide the same
functionality at a lower or comparable performance cost, the
solution is to simply remove safemalloc. Third-party tools
can provide the same functionality at a lower or comparable
performance cost.
The removal of safemalloc also allows a simplification of the
malloc wrappers, removing quite a bit of kludge: redefinition
of my_malloc, my_free and the removal of the unused second
argument of my_free. Since free() always check whether the
supplied pointer is null, redudant checks are also removed.
Also, this patch adds unit testing for my_malloc and moves
my_realloc implementation into the same file as the other
memory allocation primitives.
client/mysqldump.c:
Pass my_free directly as its signature is compatible with the
callback type -- which wasn't the case for free_table_ent.
Essentially, the problem is that safemalloc is excruciatingly
slow as it checks all allocated blocks for overrun at each
memory management primitive, yielding a almost exponential
slowdown for the memory management functions (malloc, realloc,
free). The overrun check basically consists of verifying some
bytes of a block for certain magic keys, which catches some
simple forms of overrun. Another minor problem is violation
of aliasing rules and that its own internal list of blocks
is prone to corruption.
Another issue with safemalloc is rather the maintenance cost
as the tool has a significant impact on the server code.
Given the magnitude of memory debuggers available nowadays,
especially those that are provided with the platform malloc
implementation, maintenance of a in-house and largely obsolete
memory debugger becomes a burden that is not worth the effort
due to its slowness and lack of support for detecting more
common forms of heap corruption.
Since there are third-party tools that can provide the same
functionality at a lower or comparable performance cost, the
solution is to simply remove safemalloc. Third-party tools
can provide the same functionality at a lower or comparable
performance cost.
The removal of safemalloc also allows a simplification of the
malloc wrappers, removing quite a bit of kludge: redefinition
of my_malloc, my_free and the removal of the unused second
argument of my_free. Since free() always check whether the
supplied pointer is null, redudant checks are also removed.
Also, this patch adds unit testing for my_malloc and moves
my_realloc implementation into the same file as the other
memory allocation primitives.
(make relies GNU extentions). The patch was partially
backport from 6.0.
Original comment:
bug#30708: make relies GNU extensions. Now that we no longer use
BitKeeper we can safely remove the SCCS handling with no loss of
functionality.
(make relies GNU extentions). The patch was partially
backport from 6.0.
Original comment:
bug#30708: make relies GNU extensions. Now that we no longer use
BitKeeper we can safely remove the SCCS handling with no loss of
functionality.
