The problem with MariaDB waiting was fixed earlier.
However the server still gives the old error,in case of disk full,
that includes "waiting for someone to free some space" even if
there is now wait.
This commit changes the error message for the non waiting case to:
Disk got full writing 'db.table' (Errcode: 28 "No space left on device")
Disk got full writing 'test.t1' (Errcode: 28 "No space left on device")Disk got full writing 'test.t1' (Errcode: 28 "No space left on device")Disk got full writing 'test.t1' (Errcode: 28 "No space left on device")
Problem was that initial GTID was set on wsrep_before_prepare
out-of-order. In practice GTID was set to same as previous
executed transaction GTID. In recovery valid GTID was found
from prepared transaction and this transaction is committed
leading to fact that same GTID was executed twice.
This is fixed by setting invalid GTID at wsrep_before_prepare
and later in wsrep_before_commit actual correct GTID is set
and this setting is done while we are in commit monitor i.e.
assigment is done in order of replication.
In recovery if prepared transaction is found we check its
GTID, if it is invalid transaction will be rolled back
and if it is valid it will be committed.
Initialize gtid seqno from recovered seqno when
bootstrapping a new cluster.
Added two test cases for both mariabackup and rsync SST methods
to show that GTIDs remain consistent on cluster and that
all expected rows are in the table.
Added tests for wsrep GTID recovery with binlog on and off.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Wsrep_commit_empty happens too early when wsrep is disabled. Let the
cleanup happen at end of statement.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Problem was that in case of INSERT DELAYED thd->query() is
freed before we call trans_rollback where WSREP_DEBUG
could access thd->query() in wsrep_thd_query().
Fix is to reset thd->query() to NULL in delayed_insert
destructor after it is freed. There is already
null guard at wsrep_thd_query().
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
InnoDB transactions may be reused after committed:
- when taken from the transaction pool
- during a DDL operation execution
In this case wsrep flag on trx object is cleared, which may cause wrong
execution logic afterwards (wsrep-related hooks are not run).
Make trx->wsrep flag initialize from THD object only once on InnoDB transaction
start and don't change it throughout the transaction's lifetime.
The flag is reset at commit time as before.
Unconditionally set wsrep=OFF for THD objects that represent InnoDB background
threads.
Make Wsrep_schema::store_view() operate in its own transaction.
Fix streaming replication transactions' fragments rollback to not switch
THD->wsrep value during transaction's execution
(use THD->wsrep_ignore_table as a workaround).
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Under unknown circumstances, the SQL layer may wrongly disregard an
invocation of thd_mark_transaction_to_rollback() when an InnoDB
transaction had been aborted (rolled back) due to one of the following errors:
* HA_ERR_LOCK_DEADLOCK
* HA_ERR_RECORD_CHANGED (if innodb_snapshot_isolation=ON)
* HA_ERR_LOCK_WAIT_TIMEOUT (if innodb_rollback_on_timeout=ON)
Such an error used to cause a crash of InnoDB during transaction commit.
These changes aim to catch and report the error earlier, so that not only
this crash can be avoided but also the original root cause be found and
fixed more easily later.
The idea of this fix is from Michael 'Monty' Widenius.
HA_ERR_ROLLBACK: A new error code that will be translated into
ER_ROLLBACK_ONLY, signalling that the current transaction
has been aborted and the only allowed action is ROLLBACK.
trx_t::state: Add TRX_STATE_ABORTED that is like
TRX_STATE_NOT_STARTED, but noting that the transaction had been
rolled back and aborted.
trx_t::is_started(): Replaces trx_is_started().
ha_innobase: Check the transaction state in various places.
Simplify the logic around SAVEPOINT.
ha_innobase::is_valid_trx(): Replaces ha_innobase::is_read_only().
The InnoDB logic around transaction savepoints, commit, and rollback
was unnecessarily complex and might have contributed to this
inconsistency. So, we are simplifying that logic as well.
trx_savept_t: Replace with const undo_no_t*. When we rollback to
a savepoint, all we need to know is the number of undo log records
that must survive.
trx_named_savept_t, DB_NO_SAVEPOINT: Remove. We can store undo_no_t
directly in the space allocated at innobase_hton->savepoint_offset.
fts_trx_create(): Do not copy previous savepoints.
fts_savepoint_rollback(): If a savepoint was not found, roll back
everything after the default savepoint of fts_trx_create().
The test innodb_fts.savepoint is extended to cover this code.
Reviewed by: Vladislav Lesin
Tested by: Matthias Leich
Partial commit of the greater MDEV-34348 scope.
MDEV-34348: MariaDB is violating clang-16 -Wcast-function-type-strict
Reviewed By:
============
Marko Mäkelä <marko.makela@mariadb.com>
Partial commit of the greater MDEV-34348 scope.
MDEV-34348: MariaDB is violating clang-16 -Wcast-function-type-strict
The functions queue_compare, qsort2_cmp, and qsort_cmp2
all had similar interfaces, and were used interchangable
and unsafely cast to one another.
This patch consolidates the functions all into the
qsort_cmp2 interface.
Reviewed By:
============
Marko Mäkelä <marko.makela@mariadb.com>
This is an extension of MDEV-30423 "Deadlock on Replica during BACKUP
STAGE BLOCK_COMMIT on XA transactions"
The original commit in MDEV-30423 was not complete as some usage in XA of
MDL_BACKUP_COMMIT locks did not set thd->backup_commit_lock.
This is required to be set when using parallel replication.
Fixed by ensuring that all usage of BACKUP_COMMIT lock i XA is uniform and
all sets thd->backup_commit_lock. I also changed all locks to be
MDL_EXPLICIT to keep also that part uniform.
A regression test is added.
work consistently on replication
Row-based replication does not execute CREATE .. SELECT but instead
CREATE TABLE. CREATE .. SELECT creates implict system fields on
unusual place: in-between declared fields and select fields. That was
done because select_field_pos logic requires select fields go last in
create_list.
So, CREATE .. SELECT on master and CREATE TABLE on slave create system
fields on different positions and replication gets field mismatch.
To fix this we've changed CREATE .. SELECT to create implicit system
fields on usual place in the end and updated select_field_pos for
handling this case.
Search conditions were evaluated using val_int(), which was wrong.
Fixing the code to use val_bool() instead.
Details:
- Adding a new item_base_t::IS_COND flag which marks Items used
as <search condition> in WHERE, HAVING, JOIN ON, CASE WHEN clauses.
The flag is at the parse time.
These expressions must be evaluated using val_bool() rather than val_int().
Note, the optimizer creates more Items which are used as search conditions.
Most of these items are not marked with IS_COND yet. This is OK for now,
but eventually these Items can also be fixed to have the flag.
- Adding a method Item::is_cond() which tests if the Item has the IS_COND flag.
- Implementing Item_cache_bool. It evaluates the cached expression using
val_bool() rather than val_int().
Overriding Type_handler_bool::Item_get_cache() to create Item_cache_bool.
- Implementing Item::save_bool_in_field(). It uses val_bool() rather than
val_int() to evaluate the expression.
- Implementing Type_handler_bool::Item_save_in_field()
using Item::save_bool_in_field().
- Fixing all Item_bool_func descendants to implement a virtual val_bool()
rather than a virtual val_int().
- To find places where val_int() should be fixed to val_bool(), a few
DBUG_ASSERT(!is_cond()) where added into val_int() implementations
of selected (most frequent) classes:
Item_field
Item_str_func
Item_datefunc
Item_timefunc
Item_datetimefunc
Item_cache_bool
Item_bool_func
Item_func_hybrid_field_type
Item_basic_constant descendants
- Fixing all places where DBUG_ASSERT() happened during an "mtr" run
to use val_bool() instead of val_int().
ENGINE_SUBSTITUTION only applies to CREATE TABLE and ALTER TABLE, and
Storage_engine_name::resolve_storage_engine_with_error() could be
called when executing any sql command.
There are two problems.
First, replication fails when XA transactions are used where the
slave has replicate_do_db set and the client has touched a different
database when running DML such as inserts. This is because XA
commands are not treated as keywords, and are thereby not exempt
from the replication filter. The effect of this is that during an XA
transaction, if its logged “use db” from the master is filtered out
by the replication filter, then XA END will be ignored, yet its
corresponding XA PREPARE will be executed in an invalid state,
thereby breaking replication.
Second, if the slave replicates an XA transaction which results in
an empty transaction, the XA START through XA PREPARE first phase of
the transaction won’t be binlogged, yet the XA COMMIT will be
binlogged. This will break replication in chain configurations.
The first problem is fixed by treating XA commands in
Query_log_event as keywords, thus allowing them to bypass the
replication filter. Note that Query_log_event::is_trans_keyword() is
changed to accept a new parameter to define its mode, to either
check for XA commands or regular transaction commands, but not both.
In addition, mysqlbinlog is adapted to use this mode so its
--database filter does not remove XA commands from its output.
The second problem fixed by overwriting the XA state in the XID
cache to be XA_ROLLBACK_ONLY, so at commit time, the server knows to
rollback the transaction and skip its binlogging. If the xid cache
is cleared before an XA transaction receives its completion command
(e.g. on server shutdown), then before reporting ER_XAER_NOTA when
the completion command is executed, the filter is first checked if
the database is ignored, and if so, the error is ignored.
Reviewed By:
============
Kristian Nielsen <knielsen@knielsen-hq.org>
Andrei Elkin <andrei.elkin@mariadb.com>
InnoDB transactions may be reused after committed:
- when taken from the transaction pool
- during a DDL operation execution
In this case wsrep flag on trx object is cleared, which may cause wrong
execution logic afterwards (wsrep-related hooks are not run).
Make trx->wsrep flag initialize from THD object only once on InnoDB transaction
start and don't change it throughout the transaction's lifetime.
The flag is reset at commit time as before.
Unconditionally set wsrep=OFF for THD objects that represent InnoDB background
threads.
Make Wsrep_schema::store_view() operate in its own transaction.
Fix streaming replication transactions' fragments rollback to not switch
THD->wsrep value during transaction's execution
(use THD->wsrep_ignore_table as a workaround).
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Correct the second parameter for strxnmov to prevent potential buffer
overflows. The second parameter must be one less than the size of the
input buffer to avoid writing past the end of the buffer.
While the second parameter is usually correct, there are exceptions
that need fixing.
This commit addresses the issue within frm_file_exists() and other
affected places.
