2003-09-09 19:06:50 +02:00
|
|
|
drop table if exists t1, t2;
|
|
|
|
create table t1 (a int) type=innodb;
|
|
|
|
create table t2 (a int) type=myisam;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
reset master;
|
|
|
|
begin;
|
2003-09-09 19:06:50 +02:00
|
|
|
insert into t1 values(1);
|
|
|
|
insert into t2 select * from t1;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
commit;
|
|
|
|
show binlog events from 79;
|
|
|
|
Log_name Pos Event_type Server_id Orig_log_pos Info
|
2003-09-29 11:31:35 +02:00
|
|
|
master-bin.001 79 Query 1 79 use `test`; BEGIN
|
|
|
|
master-bin.001 119 Query 1 79 use `test`; insert into t1 values(1)
|
|
|
|
master-bin.001 178 Query 1 79 use `test`; insert into t2 select * from t1
|
|
|
|
master-bin.001 244 Query 1 244 use `test`; COMMIT
|
2003-09-09 19:06:50 +02:00
|
|
|
delete from t1;
|
|
|
|
delete from t2;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
reset master;
|
|
|
|
begin;
|
2003-09-09 19:06:50 +02:00
|
|
|
insert into t1 values(2);
|
|
|
|
insert into t2 select * from t1;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
rollback;
|
|
|
|
Warning: Some non-transactional changed tables couldn't be rolled back
|
|
|
|
show binlog events from 79;
|
|
|
|
Log_name Pos Event_type Server_id Orig_log_pos Info
|
2003-09-29 11:31:35 +02:00
|
|
|
master-bin.001 79 Query 1 79 use `test`; BEGIN
|
|
|
|
master-bin.001 119 Query 1 79 use `test`; insert into t1 values(2)
|
|
|
|
master-bin.001 178 Query 1 79 use `test`; insert into t2 select * from t1
|
|
|
|
master-bin.001 244 Query 1 244 use `test`; ROLLBACK
|
2003-09-09 19:06:50 +02:00
|
|
|
delete from t1;
|
|
|
|
delete from t2;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
reset master;
|
|
|
|
begin;
|
2003-09-09 19:06:50 +02:00
|
|
|
insert into t1 values(3);
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
savepoint my_savepoint;
|
2003-09-09 19:06:50 +02:00
|
|
|
insert into t1 values(4);
|
|
|
|
insert into t2 select * from t1;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
rollback to savepoint my_savepoint;
|
|
|
|
Warning: Some non-transactional changed tables couldn't be rolled back
|
|
|
|
commit;
|
|
|
|
show binlog events from 79;
|
|
|
|
Log_name Pos Event_type Server_id Orig_log_pos Info
|
2003-09-29 11:31:35 +02:00
|
|
|
master-bin.001 79 Query 1 79 use `test`; BEGIN
|
|
|
|
master-bin.001 119 Query 1 79 use `test`; insert into t1 values(3)
|
|
|
|
master-bin.001 178 Query 1 79 use `test`; savepoint my_savepoint
|
|
|
|
master-bin.001 235 Query 1 79 use `test`; insert into t1 values(4)
|
|
|
|
master-bin.001 294 Query 1 79 use `test`; insert into t2 select * from t1
|
|
|
|
master-bin.001 360 Query 1 79 use `test`; rollback to savepoint my_savepoint
|
|
|
|
master-bin.001 429 Query 1 429 use `test`; COMMIT
|
2003-09-09 19:06:50 +02:00
|
|
|
delete from t1;
|
|
|
|
delete from t2;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
reset master;
|
|
|
|
begin;
|
2003-09-09 19:06:50 +02:00
|
|
|
insert into t1 values(5);
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
savepoint my_savepoint;
|
2003-09-09 19:06:50 +02:00
|
|
|
insert into t1 values(6);
|
|
|
|
insert into t2 select * from t1;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
rollback to savepoint my_savepoint;
|
|
|
|
Warning: Some non-transactional changed tables couldn't be rolled back
|
2003-09-09 19:06:50 +02:00
|
|
|
insert into t1 values(7);
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
commit;
|
2003-09-09 19:06:50 +02:00
|
|
|
select a from t1 order by a;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
a
|
|
|
|
5
|
|
|
|
7
|
|
|
|
show binlog events from 79;
|
|
|
|
Log_name Pos Event_type Server_id Orig_log_pos Info
|
2003-09-29 11:31:35 +02:00
|
|
|
master-bin.001 79 Query 1 79 use `test`; BEGIN
|
|
|
|
master-bin.001 119 Query 1 79 use `test`; insert into t1 values(5)
|
|
|
|
master-bin.001 178 Query 1 79 use `test`; savepoint my_savepoint
|
|
|
|
master-bin.001 235 Query 1 79 use `test`; insert into t1 values(6)
|
|
|
|
master-bin.001 294 Query 1 79 use `test`; insert into t2 select * from t1
|
|
|
|
master-bin.001 360 Query 1 79 use `test`; rollback to savepoint my_savepoint
|
|
|
|
master-bin.001 429 Query 1 79 use `test`; insert into t1 values(7)
|
|
|
|
master-bin.001 488 Query 1 488 use `test`; COMMIT
|
2003-09-09 19:06:50 +02:00
|
|
|
delete from t1;
|
|
|
|
delete from t2;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
reset master;
|
|
|
|
select get_lock("a",10);
|
|
|
|
get_lock("a",10)
|
|
|
|
1
|
|
|
|
begin;
|
2003-09-09 19:06:50 +02:00
|
|
|
insert into t1 values(8);
|
|
|
|
insert into t2 select * from t1;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
select get_lock("a",10);
|
|
|
|
get_lock("a",10)
|
|
|
|
1
|
|
|
|
show binlog events from 79;
|
|
|
|
Log_name Pos Event_type Server_id Orig_log_pos Info
|
2003-09-29 11:31:35 +02:00
|
|
|
master-bin.001 79 Query 1 79 use `test`; BEGIN
|
|
|
|
master-bin.001 119 Query 1 79 use `test`; insert into t1 values(8)
|
|
|
|
master-bin.001 178 Query 1 79 use `test`; insert into t2 select * from t1
|
|
|
|
master-bin.001 244 Query 1 244 use `test`; ROLLBACK
|
2003-09-09 19:06:50 +02:00
|
|
|
delete from t1;
|
|
|
|
delete from t2;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
reset master;
|
2003-09-09 19:06:50 +02:00
|
|
|
insert into t1 values(9);
|
|
|
|
insert into t2 select * from t1;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
show binlog events from 79;
|
|
|
|
Log_name Pos Event_type Server_id Orig_log_pos Info
|
2003-09-29 11:31:35 +02:00
|
|
|
master-bin.001 79 Query 1 79 use `test`; insert into t1 values(9)
|
|
|
|
master-bin.001 138 Query 1 138 use `test`; insert into t2 select * from t1
|
2003-09-09 19:06:50 +02:00
|
|
|
delete from t1;
|
|
|
|
delete from t2;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
reset master;
|
2003-09-09 19:06:50 +02:00
|
|
|
insert into t1 values(10);
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
begin;
|
2003-09-09 19:06:50 +02:00
|
|
|
insert into t2 select * from t1;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
show binlog events from 79;
|
|
|
|
Log_name Pos Event_type Server_id Orig_log_pos Info
|
2003-09-29 11:31:35 +02:00
|
|
|
master-bin.001 79 Query 1 79 use `test`; insert into t1 values(10)
|
|
|
|
master-bin.001 139 Query 1 139 use `test`; insert into t2 select * from t1
|
2003-09-09 19:06:50 +02:00
|
|
|
insert into t1 values(11);
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
commit;
|
|
|
|
show binlog events from 79;
|
|
|
|
Log_name Pos Event_type Server_id Orig_log_pos Info
|
2003-09-29 11:31:35 +02:00
|
|
|
master-bin.001 79 Query 1 79 use `test`; insert into t1 values(10)
|
|
|
|
master-bin.001 139 Query 1 139 use `test`; insert into t2 select * from t1
|
|
|
|
master-bin.001 205 Query 1 205 use `test`; BEGIN
|
|
|
|
master-bin.001 245 Query 1 205 use `test`; insert into t1 values(11)
|
|
|
|
master-bin.001 305 Query 1 305 use `test`; COMMIT
|
2003-09-09 19:06:50 +02:00
|
|
|
alter table t2 type=INNODB;
|
|
|
|
delete from t1;
|
|
|
|
delete from t2;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
reset master;
|
|
|
|
begin;
|
2003-09-09 19:06:50 +02:00
|
|
|
insert into t1 values(12);
|
|
|
|
insert into t2 select * from t1;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
commit;
|
|
|
|
show binlog events from 79;
|
|
|
|
Log_name Pos Event_type Server_id Orig_log_pos Info
|
2003-09-29 11:31:35 +02:00
|
|
|
master-bin.001 79 Query 1 79 use `test`; BEGIN
|
|
|
|
master-bin.001 119 Query 1 79 use `test`; insert into t1 values(12)
|
|
|
|
master-bin.001 179 Query 1 79 use `test`; insert into t2 select * from t1
|
|
|
|
master-bin.001 245 Query 1 245 use `test`; COMMIT
|
2003-09-09 19:06:50 +02:00
|
|
|
delete from t1;
|
|
|
|
delete from t2;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
reset master;
|
|
|
|
begin;
|
2003-09-09 19:06:50 +02:00
|
|
|
insert into t1 values(13);
|
|
|
|
insert into t2 select * from t1;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
rollback;
|
|
|
|
show binlog events from 79;
|
|
|
|
Log_name Pos Event_type Server_id Orig_log_pos Info
|
2003-09-09 19:06:50 +02:00
|
|
|
delete from t1;
|
|
|
|
delete from t2;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
reset master;
|
|
|
|
begin;
|
2003-09-09 19:06:50 +02:00
|
|
|
insert into t1 values(14);
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
savepoint my_savepoint;
|
2003-09-09 19:06:50 +02:00
|
|
|
insert into t1 values(15);
|
|
|
|
insert into t2 select * from t1;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
rollback to savepoint my_savepoint;
|
|
|
|
commit;
|
|
|
|
show binlog events from 79;
|
|
|
|
Log_name Pos Event_type Server_id Orig_log_pos Info
|
2003-09-29 11:31:35 +02:00
|
|
|
master-bin.001 79 Query 1 79 use `test`; BEGIN
|
|
|
|
master-bin.001 119 Query 1 79 use `test`; insert into t1 values(14)
|
|
|
|
master-bin.001 179 Query 1 179 use `test`; COMMIT
|
2003-09-09 19:06:50 +02:00
|
|
|
delete from t1;
|
|
|
|
delete from t2;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
reset master;
|
|
|
|
begin;
|
2003-09-09 19:06:50 +02:00
|
|
|
insert into t1 values(16);
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
savepoint my_savepoint;
|
2003-09-09 19:06:50 +02:00
|
|
|
insert into t1 values(17);
|
|
|
|
insert into t2 select * from t1;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
rollback to savepoint my_savepoint;
|
2003-09-09 19:06:50 +02:00
|
|
|
insert into t1 values(18);
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
commit;
|
2003-09-09 19:06:50 +02:00
|
|
|
select a from t1 order by a;
|
2 minor edits, plus
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
2003-08-22 15:39:24 +02:00
|
|
|
a
|
|
|
|
16
|
|
|
|
18
|
|
|
|
show binlog events from 79;
|
|
|
|
Log_name Pos Event_type Server_id Orig_log_pos Info
|
2003-09-29 11:31:35 +02:00
|
|
|
master-bin.001 79 Query 1 79 use `test`; BEGIN
|
|
|
|
master-bin.001 119 Query 1 79 use `test`; insert into t1 values(16)
|
|
|
|
master-bin.001 179 Query 1 79 use `test`; insert into t1 values(18)
|
|
|
|
master-bin.001 239 Query 1 239 use `test`; COMMIT
|
2003-09-09 19:06:50 +02:00
|
|
|
drop table t1,t2;
|