2007-06-12 21:47:00 +02:00
SET BINLOG_FORMAT=MIXED;
RESET MASTER;
CREATE TABLE t1 (a INT PRIMARY KEY, b INT) ENGINE=INNODB;
INSERT INTO t1 VALUES (1,1),(2,2),(3,3),(4,4),(5,5),(6,6);
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
Draft patch that fixes and a sketches test cases for:
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
2010-05-07 20:28:59 +04:00
BEGIN;
2007-06-12 21:47:00 +02:00
UPDATE t1 SET b = 2*a WHERE a > 1;
COMMIT;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
Draft patch that fixes and a sketches test cases for:
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
2010-05-07 20:28:59 +04:00
BEGIN;
2007-06-12 21:47:00 +02:00
UPDATE t1 SET b = a * a WHERE a > 3;
COMMIT;
SET BINLOG_FORMAT=STATEMENT;
SET SESSION TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;
Draft patch that fixes and a sketches test cases for:
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
2010-05-07 20:28:59 +04:00
BEGIN;
2007-06-12 21:47:00 +02:00
UPDATE t1 SET b = 1*a WHERE a > 1;
2010-04-28 14:47:49 +02:00
ERROR HY000: Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-based logging. InnoDB is limited to row-logging when transaction isolation level is READ COMMITTED or READ UNCOMMITTED.
2007-06-12 21:47:00 +02:00
COMMIT;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
Draft patch that fixes and a sketches test cases for:
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
2010-05-07 20:28:59 +04:00
BEGIN;
2007-06-12 21:47:00 +02:00
UPDATE t1 SET b = 2*a WHERE a > 2;
2010-04-28 14:47:49 +02:00
ERROR HY000: Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-based logging. InnoDB is limited to row-logging when transaction isolation level is READ COMMITTED or READ UNCOMMITTED.
2007-06-12 21:47:00 +02:00
COMMIT;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
Draft patch that fixes and a sketches test cases for:
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
2010-05-07 20:28:59 +04:00
BEGIN;
2007-06-12 21:47:00 +02:00
UPDATE t1 SET b = 3*a WHERE a > 3;
COMMIT;
SET SESSION TRANSACTION ISOLATION LEVEL SERIALIZABLE;
Draft patch that fixes and a sketches test cases for:
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
2010-05-07 20:28:59 +04:00
BEGIN;
2007-06-12 21:47:00 +02:00
UPDATE t1 SET b = 4*a WHERE a > 4;
COMMIT;
SET BINLOG_FORMAT=MIXED;
SET SESSION TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;
Draft patch that fixes and a sketches test cases for:
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
2010-05-07 20:28:59 +04:00
BEGIN;
2007-06-12 21:47:00 +02:00
UPDATE t1 SET b = 1*a WHERE a > 1;
COMMIT;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
Draft patch that fixes and a sketches test cases for:
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
2010-05-07 20:28:59 +04:00
BEGIN;
2007-06-12 21:47:00 +02:00
UPDATE t1 SET b = 2*a WHERE a > 2;
COMMIT;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
Draft patch that fixes and a sketches test cases for:
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
2010-05-07 20:28:59 +04:00
BEGIN;
2007-06-12 21:47:00 +02:00
UPDATE t1 SET b = 3*a WHERE a > 3;
COMMIT;
SET SESSION TRANSACTION ISOLATION LEVEL SERIALIZABLE;
Draft patch that fixes and a sketches test cases for:
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
2010-05-07 20:28:59 +04:00
BEGIN;
2007-06-12 21:47:00 +02:00
UPDATE t1 SET b = 4*a WHERE a > 4;
COMMIT;
SET BINLOG_FORMAT=ROW;
SET SESSION TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;
Draft patch that fixes and a sketches test cases for:
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
2010-05-07 20:28:59 +04:00
BEGIN;
2007-06-12 21:47:00 +02:00
UPDATE t1 SET b = 1*a WHERE a > 1;
COMMIT;
SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
Draft patch that fixes and a sketches test cases for:
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
2010-05-07 20:28:59 +04:00
BEGIN;
2007-06-12 21:47:00 +02:00
UPDATE t1 SET b = 2*a WHERE a > 2;
COMMIT;
SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;
Draft patch that fixes and a sketches test cases for:
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
2010-05-07 20:28:59 +04:00
BEGIN;
2007-06-12 21:47:00 +02:00
UPDATE t1 SET b = 3*a WHERE a > 3;
COMMIT;
SET SESSION TRANSACTION ISOLATION LEVEL SERIALIZABLE;
Draft patch that fixes and a sketches test cases for:
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
2010-05-07 20:28:59 +04:00
BEGIN;
2007-06-12 21:47:00 +02:00
UPDATE t1 SET b = 4*a WHERE a > 4;
COMMIT;
fixes for test failures
and small collateral changes
mysql-test/lib/My/Test.pm:
somehow with "print" we get truncated writes sometimes
mysql-test/suite/perfschema/r/digest_table_full.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/dml_handler.result:
host table is not ported over yet
mysql-test/suite/perfschema/r/information_schema.result:
host table is not ported over yet
mysql-test/suite/perfschema/r/nesting.result:
this differs, because we don't rewrite general log queries, and multi-statement
packets are logged as a one entry. this result file is identical to what mysql-5.6.5
produces with the --log-raw option.
mysql-test/suite/perfschema/r/relaylog.result:
MariaDB modifies the binlog index file directly, while MySQL 5.6 has a feature "crash-safe binlog index" and modifies a special "crash-safe" shadow copy of the index file and then moves it over. That's why this test shows "NONE" index file writes in MySQL and "MANY" in MariaDB.
mysql-test/suite/perfschema/r/server_init.result:
MariaDB initializes the "manager" resources from the "manager" thread, and starts this thread only when --flush-time is not 0. MySQL 5.6 initializes "manager" resources unconditionally on server startup.
mysql-test/suite/perfschema/r/stage_mdl_global.result:
this differs, because MariaDB disables query cache when query_cache_size=0. MySQL does not
do that, and this causes useless mutex locks and waits.
mysql-test/suite/perfschema/r/statement_digest.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/statement_digest_consumers.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/statement_digest_long_query.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/rpl/r/rpl_mixed_drop_create_temp_table.result:
will be updated to match 5.6 when alfranio.correia@oracle.com-20110512172919-c1b5kmum4h52g0ni and anders.song@greatopensource.com-20110105052107-zoab0bsf5a6xxk2y are merged
mysql-test/suite/rpl/r/rpl_non_direct_mixed_mixing_engines.result:
will be updated to match 5.6 when anders.song@greatopensource.com-20110105052107-zoab0bsf5a6xxk2y is merged
2012-09-27 20:09:46 +02:00
include/show_binlog_events.inc
2007-06-12 21:47:00 +02:00
Log_name Pos Event_type Server_id End_log_pos Info
2013-03-26 10:35:34 +01:00
master-bin.000001 # Gtid # # GTID #-#-#
2007-06-12 21:47:00 +02:00
master-bin.000001 # Query # # use `test`; CREATE TABLE t1 (a INT PRIMARY KEY, b INT) ENGINE=INNODB
2013-03-26 10:35:34 +01:00
master-bin.000001 # Gtid # # BEGIN GTID #-#-#
2007-06-12 21:47:00 +02:00
master-bin.000001 # Query # # use `test`; INSERT INTO t1 VALUES (1,1),(2,2),(3,3),(4,4),(5,5),(6,6)
master-bin.000001 # Xid # # COMMIT /* XID */
2013-03-26 10:35:34 +01:00
master-bin.000001 # Gtid # # BEGIN GTID #-#-#
2007-06-12 21:47:00 +02:00
master-bin.000001 # Query # # use `test`; UPDATE t1 SET b = 2*a WHERE a > 1
master-bin.000001 # Xid # # COMMIT /* XID */
2013-03-26 10:35:34 +01:00
master-bin.000001 # Gtid # # BEGIN GTID #-#-#
2016-12-19 17:32:45 -05:00
master-bin.000001 # Annotate_rows # # UPDATE t1 SET b = a * a WHERE a > 3
2007-06-12 21:47:00 +02:00
master-bin.000001 # Table_map # # table_id: # (test.t1)
2013-12-09 12:37:45 +01:00
master-bin.000001 # Update_rows_v1 # # table_id: # flags: STMT_END_F
2007-06-12 21:47:00 +02:00
master-bin.000001 # Xid # # COMMIT /* XID */
2013-03-26 10:35:34 +01:00
master-bin.000001 # Gtid # # BEGIN GTID #-#-#
2007-06-12 21:47:00 +02:00
master-bin.000001 # Query # # use `test`; UPDATE t1 SET b = 3*a WHERE a > 3
master-bin.000001 # Xid # # COMMIT /* XID */
2013-03-26 10:35:34 +01:00
master-bin.000001 # Gtid # # BEGIN GTID #-#-#
2007-06-12 21:47:00 +02:00
master-bin.000001 # Query # # use `test`; UPDATE t1 SET b = 4*a WHERE a > 4
master-bin.000001 # Xid # # COMMIT /* XID */
2013-03-26 10:35:34 +01:00
master-bin.000001 # Gtid # # BEGIN GTID #-#-#
2016-12-19 17:32:45 -05:00
master-bin.000001 # Annotate_rows # # UPDATE t1 SET b = 1*a WHERE a > 1
2007-06-12 21:47:00 +02:00
master-bin.000001 # Table_map # # table_id: # (test.t1)
2013-12-09 12:37:45 +01:00
master-bin.000001 # Update_rows_v1 # # table_id: # flags: STMT_END_F
2007-06-12 21:47:00 +02:00
master-bin.000001 # Xid # # COMMIT /* XID */
2013-03-26 10:35:34 +01:00
master-bin.000001 # Gtid # # BEGIN GTID #-#-#
2016-12-19 17:32:45 -05:00
master-bin.000001 # Annotate_rows # # UPDATE t1 SET b = 2*a WHERE a > 2
2007-06-12 21:47:00 +02:00
master-bin.000001 # Table_map # # table_id: # (test.t1)
2013-12-09 12:37:45 +01:00
master-bin.000001 # Update_rows_v1 # # table_id: # flags: STMT_END_F
2007-06-12 21:47:00 +02:00
master-bin.000001 # Xid # # COMMIT /* XID */
2013-03-26 10:35:34 +01:00
master-bin.000001 # Gtid # # BEGIN GTID #-#-#
2007-06-12 21:47:00 +02:00
master-bin.000001 # Query # # use `test`; UPDATE t1 SET b = 3*a WHERE a > 3
master-bin.000001 # Xid # # COMMIT /* XID */
2013-03-26 10:35:34 +01:00
master-bin.000001 # Gtid # # BEGIN GTID #-#-#
2007-06-12 21:47:00 +02:00
master-bin.000001 # Query # # use `test`; UPDATE t1 SET b = 4*a WHERE a > 4
master-bin.000001 # Xid # # COMMIT /* XID */
2013-03-26 10:35:34 +01:00
master-bin.000001 # Gtid # # BEGIN GTID #-#-#
2016-12-19 17:32:45 -05:00
master-bin.000001 # Annotate_rows # # UPDATE t1 SET b = 1*a WHERE a > 1
2007-06-12 21:47:00 +02:00
master-bin.000001 # Table_map # # table_id: # (test.t1)
2013-12-09 12:37:45 +01:00
master-bin.000001 # Update_rows_v1 # # table_id: # flags: STMT_END_F
2007-06-12 21:47:00 +02:00
master-bin.000001 # Xid # # COMMIT /* XID */
2013-03-26 10:35:34 +01:00
master-bin.000001 # Gtid # # BEGIN GTID #-#-#
2016-12-19 17:32:45 -05:00
master-bin.000001 # Annotate_rows # # UPDATE t1 SET b = 2*a WHERE a > 2
2007-06-12 21:47:00 +02:00
master-bin.000001 # Table_map # # table_id: # (test.t1)
2013-12-09 12:37:45 +01:00
master-bin.000001 # Update_rows_v1 # # table_id: # flags: STMT_END_F
2007-06-12 21:47:00 +02:00
master-bin.000001 # Xid # # COMMIT /* XID */
2013-03-26 10:35:34 +01:00
master-bin.000001 # Gtid # # BEGIN GTID #-#-#
2016-12-19 17:32:45 -05:00
master-bin.000001 # Annotate_rows # # UPDATE t1 SET b = 3*a WHERE a > 3
2007-06-12 21:47:00 +02:00
master-bin.000001 # Table_map # # table_id: # (test.t1)
2013-12-09 12:37:45 +01:00
master-bin.000001 # Update_rows_v1 # # table_id: # flags: STMT_END_F
2007-06-12 21:47:00 +02:00
master-bin.000001 # Xid # # COMMIT /* XID */
2013-03-26 10:35:34 +01:00
master-bin.000001 # Gtid # # BEGIN GTID #-#-#
2016-12-19 17:32:45 -05:00
master-bin.000001 # Annotate_rows # # UPDATE t1 SET b = 4*a WHERE a > 4
2007-06-12 21:47:00 +02:00
master-bin.000001 # Table_map # # table_id: # (test.t1)
2013-12-09 12:37:45 +01:00
master-bin.000001 # Update_rows_v1 # # table_id: # flags: STMT_END_F
2007-06-12 21:47:00 +02:00
master-bin.000001 # Xid # # COMMIT /* XID */
DROP TABLE t1;
2009-01-08 03:06:54 +01:00
flush status;
2007-06-19 09:56:19 +02:00
show status like "binlog_cache_use";
2007-06-22 11:22:29 +02:00
Variable_name Value
2009-01-08 03:06:54 +01:00
Binlog_cache_use 0
2007-06-19 09:56:19 +02:00
show status like "binlog_cache_disk_use";
2007-06-22 11:22:29 +02:00
Variable_name Value
Binlog_cache_disk_use 0
2007-06-19 09:56:19 +02:00
create table t1 (a int) engine=innodb;
show status like "binlog_cache_use";
2007-06-22 11:22:29 +02:00
Variable_name Value
2010-10-06 09:34:49 +01:00
Binlog_cache_use 1
2007-06-19 09:56:19 +02:00
show status like "binlog_cache_disk_use";
2007-06-22 11:22:29 +02:00
Variable_name Value
Binlog_cache_disk_use 1
2007-06-19 09:56:19 +02:00
begin;
delete from t1;
commit;
show status like "binlog_cache_use";
2007-06-22 11:22:29 +02:00
Variable_name Value
2010-10-06 09:34:49 +01:00
Binlog_cache_use 2
2007-06-19 09:56:19 +02:00
show status like "binlog_cache_disk_use";
2007-06-22 11:22:29 +02:00
Variable_name Value
Binlog_cache_disk_use 1
2007-06-19 09:56:19 +02:00
drop table t1;
2007-08-14 15:35:19 -06:00
CREATE TABLE `t1` (
`a` int(11) NOT NULL auto_increment,
`b` int(11) default NULL,
PRIMARY KEY (`a`)
) ENGINE=MyISAM DEFAULT CHARSET=latin1 ;
CREATE TABLE `t2` (
`a` int(11) NOT NULL auto_increment,
`b` int(11) default NULL,
PRIMARY KEY (`a`)
) ENGINE=INNODB DEFAULT CHARSET=latin1 ;
insert into t1 values (1,1),(2,2);
insert into t2 values (1,1),(4,4);
reset master;
UPDATE t2,t1 SET t2.a=t1.a+2;
ERROR 23000: Duplicate entry '3' for key 'PRIMARY'
select * from t2 /* must be (3,1), (4,4) */;
a b
1 1
4 4
Bug #49741 test files contain explicit references to bin/relay-log positions
Some of the test cases reference to binlog position and
these position numbers are written into result explicitly.
It is difficult to maintain if log event format changes.
There are a couple of cases explicit position number appears,
we handle them in different ways
A. 'CHANGE MASTER ...' with MASTER_LOG_POS or/and RELAY_LOG_POS options
Use --replace_result to mask them.
B. 'SHOW BINLOG EVENT ...'
Replaced by show_binlog_events.inc or wait_for_binlog_event.inc.
show_binlog_events.inc file's function is enhanced by given
$binlog_file and $binlog_limit.
C. 'SHOW SLAVE STATUS', 'show_slave_status.inc' and 'show_slave_status2.inc'
For the test cases just care a few items in the result of 'SHOW SLAVE STATUS',
only the items related to each test case are showed.
'show_slave_status.inc' is rebuild, only the given items in $status_items
will be showed.
'check_slave_is_running.inc' and 'check_slave_no_error.inc'
and 'check_slave_param.inc' are auxiliary files helping
to show running status and error information easily.
mysql-test/extra/binlog_tests/binlog.test:
It only cares whether current binlog file index is changed, so it is ok
with 'show_master_status.inc' instead of 'show mater status'.
mysql-test/extra/binlog_tests/blackhole.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_deadlock.test:
Use 'check_slave_is_running.inc' instead of 'show_slave_status2.inc'.
mysql-test/extra/rpl_tests/rpl_extraMaster_Col.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_extraSlave_Col.test:
Use 'wait_for_slave_sql_error.inc' and 'ait_for_slave_sql_error_and_skip.inc' instead of 'show slave status'.
mysql-test/extra/rpl_tests/rpl_flsh_tbls.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_get_master_version_and_clock.test:
It is need now to give a error number, so use 'wait_for_slave_io_to_stop.inc'
instead of 'wait_for_slave_io_error.inc'.
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_log.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
se 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_max_relay_size.test:
se 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_ndb_apply_status.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_reset_slave.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc' statement.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
mysql-test/extra/rpl_tests/rpl_row_basic.test:
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
mysql-test/extra/rpl_tests/rpl_row_tabledefs.test:
Use 'show_slave_error_status_and_skip.inc' instead of 'show slave status'.
mysql-test/include/check_slave_is_running.inc:
To make sure both sql and io thread are running well. If not, the test will be aborted.
mysql-test/include/check_slave_no_error.inc:
To make sure both sql and io thread have no error. If not, the test will be aborted.
mysql-test/include/get_relay_log_pos.inc:
According to the position of a log event in master binlog file,
find the peer position of a log event in relay log file.
mysql-test/include/rpl_stmt_seq.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/include/show_binlog_events.inc:
Add two options $binlog_file and $binlog_limit for showing binlog events from different binlog files or/and given different limits on position or row number.
mysql-test/include/show_rpl_debug_info.inc:
Add 'SELECT NOW()' in the debug information.
mysql-test/include/show_slave_status.inc:
It's more clean and tidy Only the given columns of slave status are printed.
mysql-test/include/test_fieldsize.inc:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/include/wait_for_binlog_event.inc:
Use show_rpl_debug_info.inc instead of 'SHOW BINLOG EVENTS'.
mysql-test/include/wait_for_slave_io_error.inc:
Add $slave_io_errno and $show_slave_io_error, it waits only a given error.
mysql-test/include/wait_for_slave_param.inc:
Use die instead of exit.
mysql-test/include/wait_for_slave_sql_error.inc:
Add $slave_sql_errno and $show_slave_sql_error, it waits only a given error.
mysql-test/include/wait_for_status_var.inc:
Use die instead of exit.
mysql-test/r/flush_block_commit_notembedded.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/r/multi_update.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/r/binlog_innodb.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/r/binlog_row_binlog.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/binlog/t/binlog_innodb.test:
It checks whether somethings are binlogged, so we use 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/t/binlog_stm_binlog.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/bugs/r/rpl_bug36391.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/bugs/t/rpl_bug12691.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/bugs/t/rpl_bug36391.test:
'show master status' is replaced by 'show_master_status.inc'.
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/engines/funcs/r/rpl_000015.result:
It checks whether somethings are binlogged,
so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/engines/funcs/t/rpl_000015.test:
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
mysql-test/suite/engines/funcs/t/rpl_REDIRECT.test:
Use 'query_vertical SHOW SLAVE STATUS' instead of 'show slave status'.
There is no status columns in the result file, for no slave exists on master's server.
mysql-test/suite/engines/funcs/t/rpl_change_master.test:
This test just care whether Read_Master_Log_Pos is equal to Exec_Master_Log_Pos after 'CHANGE MASTER ..'. So 'show slave status' is removed and just check the value of Read_Master_Log_Pos and Exec_Master_Log_Pos.
mysql-test/suite/engines/funcs/t/rpl_empty_master_crash.test:
We doesn't really need the statement.
mysql-test/suite/engines/funcs/t/rpl_flushlog_loop.test:
Just show Relay_Log_File, running status and error informations.
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
mysql-test/suite/engines/funcs/t/rpl_loaddata_s.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_log_pos.test:
Mask the explicit positions in the result file.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_rbr_to_sbr.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_row_drop.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_row_inexist_tbl.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_row_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
Mask the explicit binary log positions in the result file.
mysql-test/suite/engines/funcs/t/rpl_server_id1.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
mysql-test/suite/engines/funcs/t/rpl_server_id2.test:
It doesn't really need in this test.
mysql-test/suite/engines/funcs/t/rpl_slave_status.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_switch_stm_row_mixed.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/manual/t/rpl_replication_delay.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/parts/t/rpl_partition.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/include/rpl_mixed_ddl.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/include/rpl_mixed_dml.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_000015.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc'.
mysql-test/suite/rpl/t/rpl_binlog_grant.test:
Use 'wait_for_binlog_event.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_bug33931.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_change_master.test:
This test just care whether Read_Master_Log_Pos is equal to Exec_Master_Log_Pos after 'CHANGE MASTER ..'. So 'show slave status' is removed and just check the value of Read_Master_Log_Pos and Exec_Master_Log_Pos.
mysql-test/suite/rpl/t/rpl_critical_errors.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_dual_pos_advance.test:
Mask the explicit position numbers in result file.
It is restricted running on SBR, for it want to binlog 'set @a=1' statement.
mysql-test/suite/rpl/t/rpl_empty_master_crash.test:
It doesn't need in this test.
mysql-test/suite/rpl/t/rpl_flushlog_loop.test:
UUse 'check_slave_is_running.inc' and 'show_slave_status.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test:
Use 'wait_for_slave_io_error.inc' to wait the given io thread error happening.
mysql-test/suite/rpl/t/rpl_grant.test:
It doesn't need in this test.
mysql-test/suite/rpl/t/rpl_incident.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_known_bugs_detection.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_loaddata_fatal.test:
Use 'wait_for_slave_sql_error_and_skip.inc' to wait the given sql thread error happening and then skip the event. There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_log_pos.test:
Use 'wait_for_slave_io_error.inc' to wait the given io thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_replicate_do.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_rotate_logs.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc'.
mysql-test/suite/rpl/t/rpl_row_basic_11bugs.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_create_table.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_drop.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_skip_error.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_slave_load_remove_tmpfile.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and mask the explicit position number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_sp.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_ssl.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_ssl1.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_stm_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_temporary_errors.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_idempotent.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi.test:
Mask master_log_pos and master_log_file
mysql-test/suite/rpl_ndb/t/rpl_ndb_sync.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_truncate_7ndb.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/alter_table-big.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/create-big.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/ctype_cp932_binlog_stm.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/flush_block_commit_notembedded.test:
It checks whether somethings are binlogged,
so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/t/multi_update.test:
It checks whether somethings are binlogged,
so we using 'wait_binlog_event.inc' instead of 'show master status'.
mysql-test/t/sp_trans_log.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
2010-05-24 21:54:08 +08:00
# There must no UPDATE in binlog;
fixes for test failures
and small collateral changes
mysql-test/lib/My/Test.pm:
somehow with "print" we get truncated writes sometimes
mysql-test/suite/perfschema/r/digest_table_full.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/dml_handler.result:
host table is not ported over yet
mysql-test/suite/perfschema/r/information_schema.result:
host table is not ported over yet
mysql-test/suite/perfschema/r/nesting.result:
this differs, because we don't rewrite general log queries, and multi-statement
packets are logged as a one entry. this result file is identical to what mysql-5.6.5
produces with the --log-raw option.
mysql-test/suite/perfschema/r/relaylog.result:
MariaDB modifies the binlog index file directly, while MySQL 5.6 has a feature "crash-safe binlog index" and modifies a special "crash-safe" shadow copy of the index file and then moves it over. That's why this test shows "NONE" index file writes in MySQL and "MANY" in MariaDB.
mysql-test/suite/perfschema/r/server_init.result:
MariaDB initializes the "manager" resources from the "manager" thread, and starts this thread only when --flush-time is not 0. MySQL 5.6 initializes "manager" resources unconditionally on server startup.
mysql-test/suite/perfschema/r/stage_mdl_global.result:
this differs, because MariaDB disables query cache when query_cache_size=0. MySQL does not
do that, and this causes useless mutex locks and waits.
mysql-test/suite/perfschema/r/statement_digest.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/statement_digest_consumers.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/statement_digest_long_query.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/rpl/r/rpl_mixed_drop_create_temp_table.result:
will be updated to match 5.6 when alfranio.correia@oracle.com-20110512172919-c1b5kmum4h52g0ni and anders.song@greatopensource.com-20110105052107-zoab0bsf5a6xxk2y are merged
mysql-test/suite/rpl/r/rpl_non_direct_mixed_mixing_engines.result:
will be updated to match 5.6 when anders.song@greatopensource.com-20110105052107-zoab0bsf5a6xxk2y is merged
2012-09-27 20:09:46 +02:00
include/show_binlog_events.inc
2007-08-14 15:35:19 -06:00
delete from t1;
delete from t2;
insert into t1 values (1,2),(3,4),(4,4);
insert into t2 values (1,2),(3,4),(4,4);
reset master;
UPDATE t2,t1 SET t2.a=t2.b where t2.a=t1.a;
ERROR 23000: Duplicate entry '4' for key 'PRIMARY'
Bug #49741 test files contain explicit references to bin/relay-log positions
Some of the test cases reference to binlog position and
these position numbers are written into result explicitly.
It is difficult to maintain if log event format changes.
There are a couple of cases explicit position number appears,
we handle them in different ways
A. 'CHANGE MASTER ...' with MASTER_LOG_POS or/and RELAY_LOG_POS options
Use --replace_result to mask them.
B. 'SHOW BINLOG EVENT ...'
Replaced by show_binlog_events.inc or wait_for_binlog_event.inc.
show_binlog_events.inc file's function is enhanced by given
$binlog_file and $binlog_limit.
C. 'SHOW SLAVE STATUS', 'show_slave_status.inc' and 'show_slave_status2.inc'
For the test cases just care a few items in the result of 'SHOW SLAVE STATUS',
only the items related to each test case are showed.
'show_slave_status.inc' is rebuild, only the given items in $status_items
will be showed.
'check_slave_is_running.inc' and 'check_slave_no_error.inc'
and 'check_slave_param.inc' are auxiliary files helping
to show running status and error information easily.
mysql-test/extra/binlog_tests/binlog.test:
It only cares whether current binlog file index is changed, so it is ok
with 'show_master_status.inc' instead of 'show mater status'.
mysql-test/extra/binlog_tests/blackhole.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_deadlock.test:
Use 'check_slave_is_running.inc' instead of 'show_slave_status2.inc'.
mysql-test/extra/rpl_tests/rpl_extraMaster_Col.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_extraSlave_Col.test:
Use 'wait_for_slave_sql_error.inc' and 'ait_for_slave_sql_error_and_skip.inc' instead of 'show slave status'.
mysql-test/extra/rpl_tests/rpl_flsh_tbls.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_get_master_version_and_clock.test:
It is need now to give a error number, so use 'wait_for_slave_io_to_stop.inc'
instead of 'wait_for_slave_io_error.inc'.
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_log.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
se 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_max_relay_size.test:
se 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_ndb_apply_status.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_reset_slave.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc' statement.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
mysql-test/extra/rpl_tests/rpl_row_basic.test:
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
mysql-test/extra/rpl_tests/rpl_row_tabledefs.test:
Use 'show_slave_error_status_and_skip.inc' instead of 'show slave status'.
mysql-test/include/check_slave_is_running.inc:
To make sure both sql and io thread are running well. If not, the test will be aborted.
mysql-test/include/check_slave_no_error.inc:
To make sure both sql and io thread have no error. If not, the test will be aborted.
mysql-test/include/get_relay_log_pos.inc:
According to the position of a log event in master binlog file,
find the peer position of a log event in relay log file.
mysql-test/include/rpl_stmt_seq.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/include/show_binlog_events.inc:
Add two options $binlog_file and $binlog_limit for showing binlog events from different binlog files or/and given different limits on position or row number.
mysql-test/include/show_rpl_debug_info.inc:
Add 'SELECT NOW()' in the debug information.
mysql-test/include/show_slave_status.inc:
It's more clean and tidy Only the given columns of slave status are printed.
mysql-test/include/test_fieldsize.inc:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/include/wait_for_binlog_event.inc:
Use show_rpl_debug_info.inc instead of 'SHOW BINLOG EVENTS'.
mysql-test/include/wait_for_slave_io_error.inc:
Add $slave_io_errno and $show_slave_io_error, it waits only a given error.
mysql-test/include/wait_for_slave_param.inc:
Use die instead of exit.
mysql-test/include/wait_for_slave_sql_error.inc:
Add $slave_sql_errno and $show_slave_sql_error, it waits only a given error.
mysql-test/include/wait_for_status_var.inc:
Use die instead of exit.
mysql-test/r/flush_block_commit_notembedded.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/r/multi_update.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/r/binlog_innodb.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/r/binlog_row_binlog.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/binlog/t/binlog_innodb.test:
It checks whether somethings are binlogged, so we use 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/t/binlog_stm_binlog.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/bugs/r/rpl_bug36391.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/bugs/t/rpl_bug12691.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/bugs/t/rpl_bug36391.test:
'show master status' is replaced by 'show_master_status.inc'.
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/engines/funcs/r/rpl_000015.result:
It checks whether somethings are binlogged,
so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/engines/funcs/t/rpl_000015.test:
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
mysql-test/suite/engines/funcs/t/rpl_REDIRECT.test:
Use 'query_vertical SHOW SLAVE STATUS' instead of 'show slave status'.
There is no status columns in the result file, for no slave exists on master's server.
mysql-test/suite/engines/funcs/t/rpl_change_master.test:
This test just care whether Read_Master_Log_Pos is equal to Exec_Master_Log_Pos after 'CHANGE MASTER ..'. So 'show slave status' is removed and just check the value of Read_Master_Log_Pos and Exec_Master_Log_Pos.
mysql-test/suite/engines/funcs/t/rpl_empty_master_crash.test:
We doesn't really need the statement.
mysql-test/suite/engines/funcs/t/rpl_flushlog_loop.test:
Just show Relay_Log_File, running status and error informations.
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
mysql-test/suite/engines/funcs/t/rpl_loaddata_s.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_log_pos.test:
Mask the explicit positions in the result file.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_rbr_to_sbr.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_row_drop.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_row_inexist_tbl.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_row_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
Mask the explicit binary log positions in the result file.
mysql-test/suite/engines/funcs/t/rpl_server_id1.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
mysql-test/suite/engines/funcs/t/rpl_server_id2.test:
It doesn't really need in this test.
mysql-test/suite/engines/funcs/t/rpl_slave_status.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_switch_stm_row_mixed.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/manual/t/rpl_replication_delay.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/parts/t/rpl_partition.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/include/rpl_mixed_ddl.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/include/rpl_mixed_dml.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_000015.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc'.
mysql-test/suite/rpl/t/rpl_binlog_grant.test:
Use 'wait_for_binlog_event.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_bug33931.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_change_master.test:
This test just care whether Read_Master_Log_Pos is equal to Exec_Master_Log_Pos after 'CHANGE MASTER ..'. So 'show slave status' is removed and just check the value of Read_Master_Log_Pos and Exec_Master_Log_Pos.
mysql-test/suite/rpl/t/rpl_critical_errors.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_dual_pos_advance.test:
Mask the explicit position numbers in result file.
It is restricted running on SBR, for it want to binlog 'set @a=1' statement.
mysql-test/suite/rpl/t/rpl_empty_master_crash.test:
It doesn't need in this test.
mysql-test/suite/rpl/t/rpl_flushlog_loop.test:
UUse 'check_slave_is_running.inc' and 'show_slave_status.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test:
Use 'wait_for_slave_io_error.inc' to wait the given io thread error happening.
mysql-test/suite/rpl/t/rpl_grant.test:
It doesn't need in this test.
mysql-test/suite/rpl/t/rpl_incident.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_known_bugs_detection.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_loaddata_fatal.test:
Use 'wait_for_slave_sql_error_and_skip.inc' to wait the given sql thread error happening and then skip the event. There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_log_pos.test:
Use 'wait_for_slave_io_error.inc' to wait the given io thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_replicate_do.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_rotate_logs.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc'.
mysql-test/suite/rpl/t/rpl_row_basic_11bugs.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_create_table.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_drop.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_skip_error.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_slave_load_remove_tmpfile.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and mask the explicit position number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_sp.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_ssl.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_ssl1.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_stm_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_temporary_errors.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_idempotent.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi.test:
Mask master_log_pos and master_log_file
mysql-test/suite/rpl_ndb/t/rpl_ndb_sync.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_truncate_7ndb.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/alter_table-big.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/create-big.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/ctype_cp932_binlog_stm.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/flush_block_commit_notembedded.test:
It checks whether somethings are binlogged,
so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/t/multi_update.test:
It checks whether somethings are binlogged,
so we using 'wait_binlog_event.inc' instead of 'show master status'.
mysql-test/t/sp_trans_log.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
2010-05-24 21:54:08 +08:00
# There must be no UPDATE query event;
fixes for test failures
and small collateral changes
mysql-test/lib/My/Test.pm:
somehow with "print" we get truncated writes sometimes
mysql-test/suite/perfschema/r/digest_table_full.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/dml_handler.result:
host table is not ported over yet
mysql-test/suite/perfschema/r/information_schema.result:
host table is not ported over yet
mysql-test/suite/perfschema/r/nesting.result:
this differs, because we don't rewrite general log queries, and multi-statement
packets are logged as a one entry. this result file is identical to what mysql-5.6.5
produces with the --log-raw option.
mysql-test/suite/perfschema/r/relaylog.result:
MariaDB modifies the binlog index file directly, while MySQL 5.6 has a feature "crash-safe binlog index" and modifies a special "crash-safe" shadow copy of the index file and then moves it over. That's why this test shows "NONE" index file writes in MySQL and "MANY" in MariaDB.
mysql-test/suite/perfschema/r/server_init.result:
MariaDB initializes the "manager" resources from the "manager" thread, and starts this thread only when --flush-time is not 0. MySQL 5.6 initializes "manager" resources unconditionally on server startup.
mysql-test/suite/perfschema/r/stage_mdl_global.result:
this differs, because MariaDB disables query cache when query_cache_size=0. MySQL does not
do that, and this causes useless mutex locks and waits.
mysql-test/suite/perfschema/r/statement_digest.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/statement_digest_consumers.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/statement_digest_long_query.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/rpl/r/rpl_mixed_drop_create_temp_table.result:
will be updated to match 5.6 when alfranio.correia@oracle.com-20110512172919-c1b5kmum4h52g0ni and anders.song@greatopensource.com-20110105052107-zoab0bsf5a6xxk2y are merged
mysql-test/suite/rpl/r/rpl_non_direct_mixed_mixing_engines.result:
will be updated to match 5.6 when anders.song@greatopensource.com-20110105052107-zoab0bsf5a6xxk2y is merged
2012-09-27 20:09:46 +02:00
include/show_binlog_events.inc
2007-08-14 15:35:19 -06:00
drop table t1, t2;
2017-08-07 12:38:47 +02:00
*** MDEV-11937: InnoDB flushes redo log too often ***
CREATE TABLE t1 (a INT PRIMARY KEY) ENGINE=InnoDB;
SET @old_flush = @@GLOBAL.innodb_flush_log_at_trx_commit;
SET GLOBAL innodb_flush_log_at_trx_commit=1;
SELECT IF(@num_sync < 100*1.5, "OK",
CONCAT("ERROR: More than 1 fsync per commit (saw ", @num_sync/100, ")")) AS status;
status
OK
DROP TABLE t1;
SET GLOBAL innodb_flush_log_at_trx_commit=@old_flush;
2007-06-21 22:10:40 +02:00
End of tests
