BUG#39934: Slave stops for engine that only support row-based logging
General overview:
The logic for switching to row format when binlog_format=MIXED had
numerous flaws. The underlying problem was the lack of a consistent
architecture.
General purpose of this changeset:
This changeset introduces an architecture for switching to row format
when binlog_format=MIXED. It enforces the architecture where it has
to. It leaves some bugs to be fixed later. It adds extensive tests to
verify that unsafe statements work as expected and that appropriate
errors are produced by problems with the selection of binlog format.
It was not practical to split this into smaller pieces of work.
Problem 1:
To determine the logging mode, the code has to take several parameters
into account (namely: (1) the value of binlog_format; (2) the
capabilities of the engines; (3) the type of the current statement:
normal, unsafe, or row injection). These parameters may conflict in
several ways, namely:
- binlog_format=STATEMENT for a row injection
- binlog_format=STATEMENT for an unsafe statement
- binlog_format=STATEMENT for an engine only supporting row logging
- binlog_format=ROW for an engine only supporting statement logging
- statement is unsafe and engine does not support row logging
- row injection in a table that does not support statement logging
- statement modifies one table that does not support row logging and
one that does not support statement logging
Several of these conflicts were not detected, or were detected with
an inappropriate error message. The problem of BUG#39934 was that no
appropriate error message was written for the case when an engine
only supporting row logging executed a row injection with
binlog_format=ROW. However, all above cases must be handled.
Fix 1:
Introduce new error codes (sql/share/errmsg.txt). Ensure that all
conditions are detected and handled in decide_logging_format()
Problem 2:
The binlog format shall be determined once per statement, in
decide_logging_format(). It shall not be changed before or after that.
Before decide_logging_format() is called, all information necessary to
determine the logging format must be available. This principle ensures
that all unsafe statements are handled in a consistent way.
However, this principle is not followed:
thd->set_current_stmt_binlog_row_based_if_mixed() is called in several
places, including from code executing UPDATE..LIMIT,
INSERT..SELECT..LIMIT, DELETE..LIMIT, INSERT DELAYED, and
SET @@binlog_format. After Problem 1 was fixed, that caused
inconsistencies where these unsafe statements would not print the
appropriate warnings or errors for some of the conflicts.
Fix 2:
Remove calls to THD::set_current_stmt_binlog_row_based_if_mixed() from
code executed after decide_logging_format(). Compensate by calling the
set_current_stmt_unsafe() at parse time. This way, all unsafe statements
are detected by decide_logging_format().
Problem 3:
INSERT DELAYED is not unsafe: it is logged in statement format even if
binlog_format=MIXED, and no warning is printed even if
binlog_format=STATEMENT. This is BUG#45825.
Fix 3:
Made INSERT DELAYED set itself to unsafe at parse time. This allows
decide_logging_format() to detect that a warning should be printed or
the binlog_format changed.
Problem 4:
LIMIT clause were not marked as unsafe when executed inside stored
functions/triggers/views/prepared statements. This is
BUG#45785.
Fix 4:
Make statements containing the LIMIT clause marked as unsafe at
parse time, instead of at execution time. This allows propagating
unsafe-ness to the view.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
Added auxiliary file used by binlog_unsafe.test to create and
execute recursive constructs
(functions/procedures/triggers/views/prepared statements).
mysql-test/extra/rpl_tests/rpl_foreign_key.test:
removed unnecessary set @@session.binlog_format
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Filter out table id from table map events in binlog listing.
Got rid of $binlog_format_statement.
mysql-test/extra/rpl_tests/rpl_ndb_apply_status.test:
disable warnings around call to unsafe procedure
mysql-test/include/rpl_udf.inc:
Disabled warnings for code that generates warnings
for some binlog formats. That would otherwise cause
inconsistencies in the result file.
mysql-test/r/mysqldump.result:
Views are now unsafe if they contain a LIMIT clause.
That fixed BUG#45831. Due to BUG#45832, a warning is
printed for the CREATE VIEW statement.
mysql-test/r/sp_trans.result:
Unsafe statements in stored procedures did not give a warning if
binlog_format=statement. This is BUG#45824. Now they do, so this
result file gets a new warning.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Error message changed.
mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result:
INSERT DELAYED didn't generate a warning when binlog_format=STATEMENT.
That was BUG#45825. Now there is a warning, so result file needs to be
updated.
mysql-test/suite/binlog/r/binlog_stm_ps.result:
Changed error message.
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file:
- error message changed
- added test for most combinations of unsafe constructs invoked
from recursive constructs
- INSERT DELAYED now gives a warning (because BUG#45826 is fixed)
- INSERT..SELECT..LIMIT now gives a warning from inside recursive
constructs (because BUG#45785 was fixed)
- When a recursive construct (e.g., stored proc or function)
contains more than one statement, at least one of which is
unsafe, then all statements in the recursive construct give
warnings. This is a new bug introduced by this changeset.
It will be addressed in a post-push fix.
mysql-test/suite/binlog/t/binlog_innodb.test:
Changed error code for innodb updates with READ COMMITTED or
READ UNCOMMITTED transaction isolation level and
binlog_format=statement.
mysql-test/suite/binlog/t/binlog_multi_engine.test:
The error code has changed for statements where more than one
engine is involved and one of them is self-logging.
mysql-test/suite/binlog/t/binlog_unsafe-master.opt:
Since binlog_unsafe now tests unsafe-ness of UDF's, we need an extra
flag in the .opt file.
mysql-test/suite/binlog/t/binlog_unsafe.test:
- Clarified comment.
- Rewrote first part of test. Now it tests not only unsafe variables
and functions, but also unsafe-ness due to INSERT..SELECT..LIMIT,
INSERT DELAYED, insert into two autoinc columns, use of UDF's, and
access to log tables in the mysql database.
Also, in addition to functions, procedures, triggers, and prepared
statements, it now also tests views; and it constructs recursive
calls in two levels by combining these recursive constructs.
Part of the logic is in extra/rpl_tests/create_recursive_construct.inc.
- added tests for all special system variables that should not be unsafe.
- added specific tests for BUG#45785 and BUG#45825
mysql-test/suite/rpl/r/rpl_events.result:
updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_innodb.result:
updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_myisam.result:
updated result file
mysql-test/suite/rpl/r/rpl_foreign_key_innodb.result:
updated result file
mysql-test/suite/rpl/r/rpl_idempotency.result:
updated result file
mysql-test/suite/rpl/r/rpl_mix_found_rows.result:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file equals
the second half of the old rpl_found_rows.result, with the following
modifications:
- minor formatting changes
- additional initialization
mysql-test/suite/rpl/r/rpl_mix_insert_delayed.result:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/r/rpl_rbr_to_sbr.result:
updated result file
mysql-test/suite/rpl/r/rpl_row_idempotency.result:
Moved the second half of rpl_idempotency.test, which only
executed in row mode, to rpl_row_idempotency.test. This is
the new result file.
mysql-test/suite/rpl/r/rpl_row_insert_delayed.result:
Got rid of unnecessary explicit setting of binlog format.
mysql-test/suite/rpl/r/rpl_stm_found_rows.result:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
this file:
- minor formatting changes
- warning is now issued for unsafe statements inside procedures
(since BUG#45824 is fixed)
- second half of file is moved to rpl_mix_found_rows.result
mysql-test/suite/rpl/r/rpl_stm_insert_delayed.result:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
error message changed
mysql-test/suite/rpl/r/rpl_temporary_errors.result:
updated result file
mysql-test/suite/rpl/r/rpl_udf.result:
Remove explicit set of binlog format (and triplicate test execution)
and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl/t/rpl_bug31076.test:
Test is only valid in mixed or row mode since it generates row events.
mysql-test/suite/rpl/t/rpl_events.test:
Removed explicit set of binlog_format and removed duplicate testing.
Instead, we rely on the test system to try all binlog formats.
mysql-test/suite/rpl/t/rpl_extraColmaster_innodb.test:
Removed triplicate testing and instead relying on test system.
Test is only relevant for row format since statement-based replication
cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_extraColmaster_myisam.test:
Removed triplicate testing and instead relying on test system.
Test is only relevant for row format since statement-based replication
cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_idempotency-slave.opt:
Removed .opt file to avoid server restarts.
mysql-test/suite/rpl/t/rpl_idempotency.test:
- Moved out row-only tests to a new test file, rpl_row_idempotency.test.
rpl_idempotency now only contains tests that execute in all
binlog_formats.
- While I was here, also removed .opt file to avoid server restarts.
The slave_exec_mode is now set inside the test instead.
mysql-test/suite/rpl/t/rpl_mix_found_rows.test:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file
contains the second half of the original rpl_found_rows.test with the
follwing changes:
- initialization
- removed SET_BINLOG_FORMAT and added have_binlog_format_mixed.inc
- minor formatting changes
mysql-test/suite/rpl/t/rpl_mix_insert_delayed.test:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test:
Test cannot execute in statement mode, since we no longer
switch to row format when binlog_format=statement.
Enforced mixed mode throughout the test.
mysql-test/suite/rpl/t/rpl_row_idempotency.test:
Moved the second half of rpl_idempotency.test, which only
executed in row mode, to this new file. We now rely on the
test system to set binlog format.
mysql-test/suite/rpl/t/rpl_row_insert_delayed.test:
- Got rid of unnecessary explicit setting of binlog format.
- extra/rpl_tests/rpl_insert_delayed.test does not need the
$binlog_format_statement variable any more, so that was
removed.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
The test switches binlog_format internally and master generates both
row and statement events. Hence, the slave must be able to log in both
statement and row format. Hence test was changed to only execute in
mixed mode.
mysql-test/suite/rpl/t/rpl_stm_found_rows.test:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
this file:
- minor formatting changes
- added have_binlog_format_statement and removed SET BINLOG_FORMAT.
- second half of file is moved to rpl_mix_found_rows.test
- added cleanup code
mysql-test/suite/rpl/t/rpl_stm_insert_delayed.test:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test:
The test switches binlog_format internally and master generates both
row and statement events. Hence, the slave must be able to log in both
statement and row format. Hence test was changed to only execute in
mixed mode on slave.
mysql-test/suite/rpl/t/rpl_temporary_errors.test:
Removed explicit set of binlog format. Instead, the test now only
executes in row mode.
mysql-test/suite/rpl/t/rpl_udf.test:
Remove explicit set of binlog format (and triplicate test execution)
and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl_ndb/combinations:
Added combinations file for rpl_ndb.
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
new result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result:
updated result file
mysql-test/suite/rpl_ndb/t/rpl_ndb_2innodb.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_2myisam.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-master.opt:
new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-slave.opt:
new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test:
New test case to verify all errors and warnings generated by
decide_logging_format.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob2.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
While I was here, also made the test clean up after itself.
mysql-test/suite/rpl_ndb/t/rpl_ndb_commit_afterflush.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_ctype_ucs2_def.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_delete_nowhere.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_db.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_table.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_func003.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_innodb_trans.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_insert_ignore.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_mixed_engines_transactions.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi_update3.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_rep_ignore.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_row_001.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp003.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp006.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_trig004.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/t/partition_innodb_stmt.test:
Changed error code for innodb updates with READ COMMITTED or
READ UNCOMMITTED transaction isolation level and
binlog_format=statement.
sql/event_db_repository.cc:
Use member function to read current_stmt_binlog_row_based.
sql/events.cc:
Use member function to read current_stmt_binlog_row_based.
sql/ha_ndbcluster_binlog.cc:
reset_current_stmt_binlog_row_based() is not a no-op for the ndb_binlog
thread any more. Instead, the ndb_binlog thread now forces row mode both
initially and just after calling mysql_parse. (mysql_parse() is the only
place where reset_current_stmt_binlog_row_based() may be called from
the ndb_binlog thread, so these are the only two places that need to
change.)
sql/ha_partition.cc:
Use member function to read current_stmt_binlog_row_based.
sql/handler.cc:
Use member function to read current_stmt_binlog_row_based.
sql/item_create.cc:
Added DBUG_ENTER to some functions, to be able to trace when
set_stmt_unsafe is called.
sql/log.cc:
Use member function to read current_stmt_binlog_row_based.
sql/log_event.cc:
- Moved logic for changing to row format out of do_apply_event (and into
decide_logging_format).
- Added @todo comment for post-push cleanup.
sql/log_event_old.cc:
Move logic for changing to row format out of do_apply_event (and into
decide_logging_format).
sql/mysql_priv.h:
Make decide_logging_format() a member of the THD class, for two reasons:
- It is natural from an object-oriented perspective.
- decide_logging_format() needs to access private members of THD
(specifically, the new binlog_warning_flags field).
sql/rpl_injector.cc:
Removed call to set_current_stmt_binlog_row_based().
From now on, only decide_logging_fromat is allowed to modify
current_stmt_binlog_row_based. This call is from the ndb_binlog
thread, mostly executing code in ha_ndbcluster_binlog.cc.
This call can be safely removed, because:
- current_stmt_binlog_row_based is initialized for the ndb_binlog
thread's THD object when the THD object is created. So we're
not going to read uninitialized memory.
- The behavior of ndb_binlog thread does not use the state of the
current_stmt_binlog_row_based. It is conceivable that the
ndb_binlog thread would rely on the current_stmt_binlog_format
in two situations:
(1) when it calls mysql_parse;
(2) when it calls THD::binlog_query.
In case (1), it always clears THD::options&OPTION_BIN_LOG (because
run_query() in ha_ndbcluster_binlog.cc is only called with
disable_binlogging = TRUE).
In case (2), it always uses qtype=STMT_QUERY_TYPE.
sql/set_var.cc:
Added @todo comment for post-push cleanup.
sql/share/errmsg.txt:
Added new error messages and clarified ER_BINLOG_UNSAFE_STATEMENT.
sql/sp.cc:
Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sp_head.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sp_head.h:
Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_acl.cc:
Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sql_base.cc:
- Made decide_logging_format take care of all logic for deciding the
logging format, and for determining the related warnings and errors.
See comment above decide_logging_format for details.
- Made decide_logging_format a member function of THD, since it needs
to access private members of THD and since its purpose is to update
the state of a THD object.
- Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_class.cc:
- Moved logic for determining unsafe warnings away from THD::binlog_query
(and into decide_logging_format()). Now, it works like this:
1. decide_logging_format detects that the current statement shall
produce a warning, if it ever makes it to the binlog
2. decide_logging_format sets a flag of THD::binlog_warning_flags.
3. THD::binlog_query reads the flag. If the flag is set, it generates
a warning.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_class.h:
- Added THD::binlog_warning_flags (see sql_class.cc for explanation).
- Made decide_logging_format() and reset_for_next_command() member
functions of THD (instead of standalone functions). This was needed
for two reasons: (1) the functions need to access the private member
THD::binlog_warning_flags; (2) the purpose of these functions is to
update the staet of a THD object, so from an object-oriented point
of view they should be member functions.
- Encapsulated current_stmt_binlog_row_based, so it is now private and
can only be accessed from a member function. Also changed the
data type to an enumeration instead of a bool.
- Removed MYSQL_QUERY_TYPE, because it was equivalent to
STMT_QUERY_TYPE anyways.
- When reset_current_stmt_binlog_row_based was called from the
ndb_binlog thread, it would behave as a no-op. This special
case has been removed, and the behavior of
reset_current_stmt_binlog_row_based does not depend on which thread
calls it any more. The special case did not serve any purpose,
since the ndb binlog thread did not take the
current_stmt_binlog_row_based flag into account anyways.
sql/sql_delete.cc:
- Moved logic for setting row format for DELETE..LIMIT away from
mysql_prepare_delete.
(Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
and rely on decide_logging_format() (sql_class.cc) to set row format.)
This is part of the fix for BUG#45831.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_insert.cc:
- Removed unnecessary calls to thd->lex->set_stmt_unsafe() and
thd->set_current_stmt_binlog_row_based_if_mixed() from
handle_delayed_insert(). The calls are unnecessary because they
have already been made; they were made in the constructor of
the `di' object.
- Since decide_logging_format() is now a member function of THD, code
that calls decide_logging_format() had to be updated.
- Added DBUG_ENTER call, to be able to trace when set_stmt_unsafe is
called.
- Moved call to set_stmt_unsafe() for INSERT..SELECT..LIMIT away from
mysql_insert_select_prepare() (and into decide_logging_format).
This is part of the fix for BUG#45831.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_lex.h:
- Added the flag BINLOG_STMT_FLAG_ROW_INJECTION to enum_binlog_stmt_flag.
This was necessary so that a statement can identify itself as a row
injection.
- Added appropriate setter and getter functions for the new flag.
- Added or clarified some comments.
- Added DBUG_ENTER()
sql/sql_load.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_parse.cc:
- Made mysql_reset_thd_for_next_command() clear thd->binlog_warning_flags.
- Since thd->binlog_warning_flags is private, it must be set in a
member function of THD. Hence, moved the body of
mysql_reset_thd_for_next_command() to the new member function
THD::reset_thd_for_next_command(), and made
mysql_reset_thd_for_next_command() call
THD::reset_thd_for_next_command().
- Removed confusing comment.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_repl.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_table.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_udf.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_update.cc:
Moved logic for setting row format for UPDATE..LIMIT away from
mysql_prepare_update.
(Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
and rely on decide_logging_format() (sql_class.cc) to set row format.)
This is part of the fix for BUG#45831.
sql/sql_yacc.yy:
Made INSERT DELAYED, INSERT..SELECT..LIMIT, UPDATE..LIMIT, and
DELETE..LIMIT mark themselves as unsafe at parse time (instead
of at execution time).
This is part of the fixes BUG#45831 and BUG#45825.
storage/example/ha_example.cc:
Made exampledb accept inserts. This was needed by the new test case
rpl_ndb_binlog_format_errors, because it needs an engine that
is statement-only (and accepts inserts).
storage/example/ha_example.h:
Made exampledb a statement-only engine instead of a row-only engine.
No existing test relied exampledb's row-only capabilities. The new
test case rpl_ndb_binlog_format_errors needs an engine that is
statement-only.
storage/innobase/handler/ha_innodb.cc:
- Changed error error code and message given by innodb when
binlog_format=STATEMENT and transaction isolation level is
READ COMMITTED or READ UNCOMMITTED.
- While I was here, also simplified the condition for
checking when to give the error.
2009-07-14 21:31:19 +02:00
|
|
|
source include/have_binlog_format_mixed_or_row.inc;
|
2007-09-20 16:31:05 +02:00
|
|
|
source include/master-slave.inc;
|
|
|
|
|
|
WL#5151: Conversion between different types when replicating
Row-based replication requires the types of columns on the
master and slave to be approximately the same (some safe
conversions between strings are allowed), but does not
allow safe conversions between fields of similar types such
as TINYINT and INT.
This patch implement type conversions between similar fields
on the master and slave.
The conversions are controlled using a new variable
SLAVE_TYPE_CONVERSIONS of type SET('ALL_LOSSY','ALL_NON_LOSSY').
Non-lossy conversions are any conversions that do not run the
risk of losing any information, while lossy conversions can
potentially truncate the value. The column definitions are
checked to decide if the conversion is acceptable.
If neither conversion is enabled, it is required that the
definitions of the columns are identical on master and slave.
Conversion is done by creating an internal conversion table,
unpacking the master data into it, and then copy the data to
the real table on the slave.
.bzrignore:
New files added
client/Makefile.am:
New files added
client/mysqlbinlog.cc:
Functions in rpl_utility.cc is now needed by mysqlbinlog.cc.
libmysqld/Makefile.am:
New files added
mysql-test/extra/rpl_tests/check_type.inc:
Test include file to check a single type conversion.
mysql-test/extra/rpl_tests/rpl_extraSlave_Col.test:
Switching to use INT instead of TEXT for column that should not have matching types.
mysql-test/extra/rpl_tests/rpl_row_basic.test:
Adding code to enable type conversions for BIT tests since InnoDB
cannot handle them properly due to incorrect information stored as
metadata.
mysql-test/extra/rpl_tests/type_conversions.test:
Test file to check a set of type conversions
with current settings of slave_type_conversions.
mysql-test/suite/rpl/t/rpl_typeconv.test:
Test file to test conversions from master to slave with
all possible values for slave_type_conversions.
The test also checks that the slave_type_conversions
variable works as expected.
sql/field.cc:
Changing definition of compatible_field_size to both check if
two field with identical base types are compatible and give an
order between them if they are compatible.
This only implement checking on the slave, so it will not affect
replication from an old master to a new slave.
sql/field.h:
Changing prototypes for functions:
- compatible_field_size()
- init_for_tmp_table()
- row_pack_length()
sql/log_event.cc:
Changing compability checks to build a conversion table if the fields
are compatible, but does not have the same base type.
sql/log_event_old.cc:
Changing compability checks to build a conversion table if the fields
are compatible, but does not have the same base type.
sql/mysql_priv.h:
Adding global option variable for SLAVE_TYPE_CONVERSIONS
sql/mysqld.cc:
Adding SLAVE_TYPE_CONVERSIONS global server variable.
sql/rpl_record.cc:
Changing unpack_row to use the conversion table if present.
sql/rpl_rli.h:
Removing function get_tabledef and replacing it with get_table_data().
This function retrieve data for table opened for replication, not just
table definition.
sql/rpl_utility.cc:
Function table_def::compatible_with is changed to compare table on master
and slave for compatibility and generate a conversions table if they are
compatible.
Computing real type of fields from metadata for ENUM and SET types.
Computing pack_length correctly for ENUM, SET, and BLOB types.
Adding optimization to not check compatibility if no
slave type conversions are enabled.
sql/rpl_utility.h:
Changing prototypes since implementation has changed.
Modifying table_def::type() to return real type instead of stored type.
sql/set_var.cc:
Adding SLAVE_TYPE_CONVERSIONS variable.
sql/set_var.h:
Adding SLAVE_TYPE_CONVERSIONS variable.
sql/share/errmsg.txt:
Adding error messages for slave type conversions.
sql/sql_class.h:
Adding SLAVE_TYPE_CONVERSIONS variable.
sql/sql_select.cc:
Correcting create_virtual_tmp_table() to compute null bit positions
correctly in the presence of bit fields.
2009-12-14 12:04:55 +01:00
|
|
|
SET @saved_slave_type_conversions = @@slave_type_conversions;
|
|
|
|
|
SET GLOBAL SLAVE_TYPE_CONVERSIONS = 'ALL_NON_LOSSY';
|
|
|
|
|
|
2007-09-20 16:31:05 +02:00
|
|
|
CREATE DATABASE track;
|
|
|
|
|
USE track;
|
|
|
|
|
|
|
|
|
|
CREATE TABLE `visits` (
|
|
|
|
|
`visits_id` int(11) unsigned NOT NULL AUTO_INCREMENT,
|
|
|
|
|
`myid` varchar(32) NOT NULL DEFAULT '',
|
|
|
|
|
`src` varchar(64) NOT NULL DEFAULT '',
|
|
|
|
|
`ip` int(10) unsigned NOT NULL DEFAULT '0',
|
|
|
|
|
`cc` char(2) NOT NULL DEFAULT '',
|
|
|
|
|
`org` varchar(80) DEFAULT NULL,
|
|
|
|
|
`ref` varchar(255) NOT NULL DEFAULT '',
|
|
|
|
|
`time` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP,
|
|
|
|
|
`host` varchar(30) NOT NULL DEFAULT '',
|
|
|
|
|
`entry` varchar(255) NOT NULL DEFAULT '',
|
|
|
|
|
`visit_exit` varchar(255) NOT NULL DEFAULT '',
|
|
|
|
|
`user_id` int(11) unsigned NOT NULL DEFAULT '0',
|
|
|
|
|
`visit_start` datetime NOT NULL DEFAULT '0000-00-00 00:00:00',
|
|
|
|
|
PRIMARY KEY (`visits_id`),
|
|
|
|
|
KEY `ip` (`ip`),
|
|
|
|
|
KEY `time` (`time`),
|
|
|
|
|
KEY `user_id` (`user_id`)
|
|
|
|
|
) ENGINE=MyISAM AUTO_INCREMENT=21293381 DEFAULT CHARSET=latin1;
|
|
|
|
|
|
|
|
|
|
CREATE TABLE `visits_events` (
|
|
|
|
|
`event_id` mediumint(8) unsigned NOT NULL DEFAULT '0',
|
|
|
|
|
`visit_id` int(11) unsigned NOT NULL DEFAULT '0',
|
|
|
|
|
`timestamp` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP,
|
|
|
|
|
`src` varchar(64) NOT NULL DEFAULT '',
|
|
|
|
|
`data` varchar(255) NOT NULL DEFAULT '',
|
|
|
|
|
`visits_events_id` int(11) unsigned NOT NULL AUTO_INCREMENT,
|
|
|
|
|
PRIMARY KEY (`visits_events_id`),
|
|
|
|
|
KEY `event_id` (`event_id`),
|
|
|
|
|
KEY `visit_id` (`visit_id`),
|
|
|
|
|
KEY `data` (`data`)
|
|
|
|
|
) ENGINE=MyISAM AUTO_INCREMENT=33900731 DEFAULT CHARSET=latin1;
|
|
|
|
|
|
2012-11-20 12:37:23 +00:00
|
|
|
/*!50530 SET @@SESSION.PSEUDO_SLAVE_MODE=1*/;
|
2007-09-20 16:31:05 +02:00
|
|
|
/*!40019 SET @@session.max_insert_delayed_threads=0*/;
|
|
|
|
|
/*!50003 SET @OLD_COMPLETION_TYPE=@@COMPLETION_TYPE,COMPLETION_TYPE=0*/;
|
|
|
|
|
--delimiter /*!*/;
|
BUG#32407: Impossible to do point-in-time recovery from older binlog
Problem: it is unsafe to read base64-printed events without first
reading the Format_description_log_event (FD). Currently, mysqlbinlog
cannot print the FD.
As a side effect, another bug has also been fixed: When mysqlbinlog
--start-position=X was specified, no ROLLBACK was printed. I changed
this, so that ROLLBACK is always printed.
This patch does several things:
- Format_description_log_event (FD) now print themselves in base64
format.
- mysqlbinlog is now able to print FD events. It has three modes:
--base64-output=auto Print row events in base64 output, and print
FD event. The FD event is printed even if
it is outside the range specified with
--start-position, because it would not be
safe to read row events otherwise. This is
the default.
--base64-output=always Like --base64-output=auto, but also print
base64 output for query events. This is
like the old --base64-output flag, which
is also a shorthand for
--base64-output=always
--base64-output=never Never print base64 output, generate error if
row events occur in binlog. This is
useful to suppress the FD event in binlogs
known not to contain row events (e.g.,
because BINLOG statement is unsafe,
requires root privileges, is not SQL, etc)
- the BINLOG statement now handles FD events correctly, by setting
the thread's rli's relay log's description_event_for_exec to the
loaded event.
In fact, executing a BINLOG statement is almost the same as reading
an event from a relay log. Before my patch, the code for this was
separated (exec_relay_log_event in slave.cc executes events from
the relay log, mysql_client_binlog_statement in sql_binlog.cc
executes BINLOG statements). I needed to augment
mysql_client_binlog_statement to do parts of what
exec_relay_log_event does. Hence, I did a small refactoring and
moved parts of exec_relay_log_event to a new function, which I
named apply_event_and_update_pos. apply_event_and_update_pos is
called both from exec_relay_log_event and from
mysql_client_binlog_statement.
- When a non-FD event is executed in a BINLOG statement, without
previously executing a FD event in a BINLOG statement, it generates
an error, because that's unsafe. I took a new error code for that:
ER_NO_FORMAT_DESCRIPTION_EVENT_BEFORE_BINLOG_STATEMENTS.
In order to get a decent error message containing the name of the
event, I added the class method char*
Log_event::get_type_str(Log_event_type type), which returns a
string name for the given Log_event_type. This is just like the
existing char* Log_event::get_type_str(), except it is a class
method that takes the log event type as parameter.
I also added PRE_GA_*_ROWS_LOG_EVENT to Log_event::get_type_str(),
so that names of old rows event are properly printed.
- When reading an event, I added a check that the event type is known
by the current Format_description_log_event. Without this, it may
crash on bad input (and I was struck by this several times).
- I patched the following test cases, which all contain BINLOG
statements for row events which must be preceded by BINLOG
statements for FD events:
- rpl_bug31076
While I was here, I fixed some small things in log_event.cc:
- replaced hard-coded 4 by EVENT_TYPE_OFFSET in 3 places
- replaced return by DBUG_VOID_RETURN in one place
- The name of the logfile can be '-' to indicate stdin. Before my
patch, the code just checked if the first character is '-'; now it
does a full strcmp(). Probably, all arguments that begin with a -
are already handled somewhere else as flags, but I still think it
is better that the code reflects what it is supposed to do, with as
little dependencies as possible on other parts of the code. If we
one day implement that all command line arguments after -- are
files (as most unix tools do), then we need this.
I also fixed the following in slave.cc:
- next_event() was declared twice, and queue_event was not static but
should be static (not used outside the file).
client/client_priv.h:
Declared the new option for base64 output.
client/mysqlbinlog.cc:
- Change from using the two-state command line option
"default/--base64-output" to the three-state
"--base64-output=[never|auto|always]"
- Print the FD event even if it is outside the --start-position range.
- Stop if a row event is about to be printed without a preceding FD
event.
- Minor fixes:
* changed 4 to EVENT_TYPE_OFFSET in some places
* Added comments
* before, "mysqlbinlog -xyz" read from stdin; now it does not
(only "mysqlbinlog -" reads stdin).
mysql-test/r/mysqlbinlog2.result:
Updated result file: mysqlbinlog now prints ROLLBACK always.
mysql-test/suite/binlog/t/disabled.def:
The test must be disabled since it reveals another bug: see BUG#33247.
mysql-test/suite/rpl/r/rpl_bug31076.result:
Updated result file
mysql-test/suite/rpl/r/rpl_row_mysqlbinlog.result:
Updated result file
mysql-test/suite/rpl/t/rpl_bug31076.test:
Had to add explicit Format_description_log_event before other BINLOG
statements
mysql-test/t/mysqlbinlog2.test:
we must suppress base64 output in result file because it contains a
timestamp
sql/log_event.cc:
- Made FD events able to print themselves
- Added check that the current FD event knows about the event type, when
an event is about to be read. (Hint to reviewers: I had to re-indent
a big block because of this; use diff -b)
* To get a decent error message, I also added a class method
const char* Log_event::get_type_str(Log_event_type)
which converts number to event type string without having a
Log_event object.
* Made Log_event::get_type_str aware of PRE_GA_*_ROWS_LOG_EVENT.
- Minor fixes:
* Changed return to DBUG_VOID_RETURN
sql/log_event.h:
- Declared enum to describe the three base64_output modes
- Use the enum instead of a flag
- Declare the new class method get_type_str (see log_event.cc)
sql/share/errmsg.txt:
Added error msg.
sql/slave.cc:
- Factored out part of exec_relay_log_event to the new function
apply_event_and_update_pos, because that code is needed when executing
BINLOG statements. (this is be functionally equivalent to the
previous code, except: (1) skipping events is now optional, controlled
by a parameter to the new function (2) the return value of
exec_relay_log_event has changed; see next item).
- Changed returned error value to always be 1. Before, it would return
the error value from apply_log_event, which was unnecessary. This
change is safe because the exact return value of exec_relay_log_event
is never examined; it is only tested to be ==0 or !=0.
- Added comments describing exec_relay_log_event and
apply_event_and_update_pos.
- Minor fixes:
* Removed duplicate declaration of next_event, made queue_event
static.
* Added doxygen code to include this file.
sql/slave.h:
Declared the new apply_event_and_update_pos
sql/sql_binlog.cc:
- Made mysql_binlog_statement set the current FD event when the given
event is an FD event. This entails using the new function
apply_event_and_update_pos from slave.cc instead of just calling the
ev->apply method.
- Made mysql_binlog_statement fail if the first BINLOG statement is not
an FD event.
mysql-test/suite/binlog/r/binlog_base64_flag.result:
New test file needs new result file
mysql-test/suite/binlog/t/binlog_base64_flag.test:
Added test case to verify that:
- my patch fixes the bug
- the new --base64-output flag works as expected
- base64 events not preceded by an FD event give an error
- an event of a type not known by the current FD event fails cleanly.
mysql-test/suite/binlog/std_data/binlog-bug32407.000001:
BitKeeper file /home/sven/bk/b32407-5.1-new-rpl-mysqlbinlog_base64/mysql-test/suite/binlog/std_data/binlog-bug32407.000001
2007-12-14 19:02:02 +01:00
|
|
|
|
|
|
|
|
# at 4 (0x4)
|
|
|
|
|
#071204 14:29:31 server id 1 end_log_pos 106
|
|
|
|
|
# Position Timestamp Type Master ID Size Master Pos Flags
|
|
|
|
|
# 4 3b 56 55 47 0f 01 00 00 00 66 00 00 00 6a 00 00 00 00 00
|
|
|
|
|
# 17 04 00 35 2e 31 2e 32 33 2d 72 63 2d 64 65 62 75 |..5.1.23.rc.debu|
|
|
|
|
|
# 27 67 2d 6c 6f 67 00 00 00 00 00 00 00 00 00 00 00 |g.log...........|
|
|
|
|
|
# 37 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
|
|
|
|
|
# 47 00 00 00 00 3b 56 55 47 13 38 0d 00 08 00 12 00 |.....VUG.8......|
|
|
|
|
|
# 57 04 04 04 04 12 00 00 53 00 04 1a 08 00 00 00 08 |.......S........|
|
|
|
|
|
# 67 08 08 02 |...|
|
|
|
|
|
# Start: binlog v 4, server v 5.1.23-rc-debug-log created 071204 14:29:31 at startup
|
|
|
|
|
|
|
|
|
|
BINLOG '
|
|
|
|
|
O1ZVRw8BAAAAZgAAAGoAAAAAAAQANS4xLjIzLXJjLWRlYnVnLWxvZwAAAAAAAAAAAAAAAAAAAAAA
|
|
|
|
|
AAAAAAAAAAAAAAAAAAA7VlVHEzgNAAgAEgAEBAQEEgAAUwAEGggAAAAICAgC
|
|
|
|
|
'/*!*/;
|
|
|
|
|
|
2007-09-20 16:31:05 +02:00
|
|
|
# at 164170623
|
|
|
|
|
# at 164170679
|
|
|
|
|
#7918 3:59:2 server id 436 end_log_pos 164170679
|
|
|
|
|
# 9c90b7f 06 4d ef 46 13 b4 01 00 00 38 00 00 00 b7 0b c9 |.M.F.....8......|
|
|
|
|
|
# 9c90b8f 09 00 00 99 57 17 02 00 00 00 00 05 74 72 61 63 |....W.......trac|
|
|
|
|
|
# 9c90b9f 6b 00 0d 76 69 |k..vi|
|
|
|
|
|
# Table_map: `track`.`visits_events` mapped to number 35084185
|
|
|
|
|
#7918 3:59:2 server id 436 end_log_pos 164170769
|
|
|
|
|
# 9c90bb7 06 4d ef 46 17 b4 01 00 00 5a 00 00 00 11 0c c9 |.M.F.....Z......|
|
|
|
|
|
# 9c90bc7 09 10 00 99 57 17 02 00 00 01 00 06 ff c0 20 4e |....W..........N|
|
|
|
|
|
# 9c90bd7 00 be f5 43 01 06 4d ef 46 00 2b 44 6f 77 6e 6c |...C..M.F..Downl|
|
|
|
|
|
# 9c90be7 6f 61 64 73 2f 4d 79 53 51 4c 2d 34 2e 31 2f 6d |oads.MySQL.4.1.m|
|
|
|
|
|
# 9c90bf7 79 73 71 6c 2d 34 2e |ysql.4.|
|
|
|
|
|
# Write_rows: table id 35084185 flags: STMT_END_F
|
|
|
|
|
|
|
|
|
|
BINLOG '
|
|
|
|
|
Bk3vRhO0AQAAOAAAALcLyQkAAJlXFwIAAAAABXRyYWNrAA12aXNpdHNfZXZlbnRzAAYJAwcPDwM=
|
|
|
|
|
Bk3vRhe0AQAAWgAAABEMyQkQAJlXFwIAAAEABv/AIE4AvvVDAQZN70YAK0Rvd25sb2Fkcy9NeVNR
|
|
|
|
|
TC00LjEvbXlzcWwtNC4xLjEyYS13aW4zMi56aXBPaAIC
|
|
|
|
|
'/*!*/;
|
|
|
|
|
# at 164170769
|
|
|
|
|
#7918 3:59:2 server id 436 end_log_pos 164170797
|
|
|
|
|
# 9c90c11 06 4d ef 46 05 b4 01 00 00 |.M.F.....|
|
|
|
|
|
# Intvar
|
|
|
|
|
SET INSERT_ID=21231039/*!*/;
|
|
|
|
|
# at 164170797
|
|
|
|
|
#7918 3:59:2 server id 436 end_log_pos 164171293
|
|
|
|
|
# 9c90c2d 06 4d ef 46 02 b4 01 00 00 f0 01 00 00 1d 0e c9 |.M.F............|
|
|
|
|
|
# 9c90c3d 09 10 00 28 80 af 01 00 00 00 00 05 00 00 1f 00 |................|
|
|
|
|
|
# 9c90c4d 00 00 40 00 00 01 00 00 00 00 00 00 00 00 06 03 |................|
|
|
|
|
|
# 9c90c5d 73 74 64 04 08 00 08 00 08 00 05 03 55 54 43 74 |std.........UTCt|
|
|
|
|
|
# 9c90c6d 72 61 63 6b 00 49 4e 53 45 52 54 20 49 4e 54 4f |rack.INSERT.INTO|
|
|
|
|
|
# 9c90c7d 20 76 69 73 69 74 73 20 28 6d 79 69 64 2c 20 75 |.visits..myid..u|
|
|
|
|
|
# 9c90c8d 73 65 72 5f 69 64 2c 20 73 72 63 2c 20 69 70 2c |ser.id..src..ip.|
|
|
|
|
|
# 9c90c9d 20 63 63 2c 20 6f 72 67 2c 20 72 65 66 2c 20 74 |.cc..org..ref..t|
|
|
|
|
|
# 9c90cad 69 6d 65 2c 20 68 6f 73 74 2c 20 65 6e 74 72 79 |ime..host..entry|
|
|
|
|
|
# 9c90cbd 2c 20 76 69 73 69 74 5f 65 78 69 74 2c 20 76 69 |..visit.exit..vi|
|
|
|
|
|
# 9c90ccd 73 69 74 5f 73 74 61 72 74 29 0a 09 09 09 56 41 |sit.start.....VA|
|
|
|
|
|
# 9c90cdd 4c 55 45 53 20 28 27 33 6d 33 6c 34 72 68 73 36 |LUES...3m3l4rhs6|
|
|
|
|
|
# 9c90ced 64 6f 30 73 66 35 70 31 69 39 6c 72 39 34 67 39 |do0sf5p1i9lr94g9|
|
|
|
|
|
# 9c90cfd 32 38 61 32 37 32 76 27 2c 20 27 27 2c 20 27 27 |28a272v.........|
|
|
|
|
|
# 9c90d0d 2c 20 49 4e 45 54 5f 41 54 4f 4e 28 27 37 31 2e |..INET.ATON..71.|
|
|
|
|
|
# 9c90d1d 31 31 38 2e 31 32 34 2e 39 38 27 29 2c 20 27 27 |118.124.98......|
|
|
|
|
|
# 9c90d2d 2c 20 27 27 2c 20 27 68 74 74 70 3a 2f 2f 64 65 |.......http...de|
|
|
|
|
|
# 9c90d3d 76 2e 6d 79 73 71 6c 2e 63 6f 6d 2f 64 6f 77 6e |v.mysql.com.down|
|
|
|
|
|
# 9c90d4d 6c 6f 61 64 73 2f 63 6f 6e 6e 65 63 74 6f 72 2f |loads.connector.|
|
|
|
|
|
# 9c90d5d 6a 2f 33 2e 30 2e 68 74 6d 6c 27 2c 20 4e 55 4c |j.3.0.html...NUL|
|
|
|
|
|
# 9c90d6d 4c 2c 20 27 64 65 76 2e 6d 79 73 71 6c 2e 63 6f |L...dev.mysql.co|
|
|
|
|
|
# 9c90d7d 6d 27 2c 20 27 2f 67 65 74 2f 44 6f 77 6e 6c 6f |m.....get.Downlo|
|
|
|
|
|
# 9c90d8d 61 64 73 2f 43 6f 6e 6e 65 63 74 6f 72 2d 4a 2f |ads.Connector.J.|
|
|
|
|
|
# 9c90d9d 6d 79 73 71 6c 2d 63 6f 6e 6e 65 63 74 6f 72 2d |mysql.connector.|
|
|
|
|
|
# 9c90dad 6a 61 76 61 2d 33 2e 30 2e 31 37 2d 67 61 2e 7a |java.3.0.17.ga.z|
|
|
|
|
|
# 9c90dbd 69 70 2f 66 72 6f 6d 2f 70 69 63 6b 27 2c 20 27 |ip.from.pick....|
|
|
|
|
|
# 9c90dcd 2f 67 65 74 2f 44 6f 77 6e 6c 6f 61 64 73 2f 43 |.get.Downloads.C|
|
|
|
|
|
# 9c90ddd 6f 6e 6e 65 63 74 6f 72 2d 4a 2f 6d 79 73 71 6c |onnector.J.mysql|
|
|
|
|
|
# 9c90ded 2d 63 6f 6e 6e 65 63 74 6f 72 2d 6a 61 76 61 2d |.connector.java.|
|
|
|
|
|
# 9c90dfd 33 2e 30 2e 31 37 2d 67 61 2e 7a 69 70 |3.0.17.ga.zip|
|
|
|
|
|
# Query thread_id=28278824 exec_time=0 error_code=0
|
2012-11-20 12:37:23 +00:00
|
|
|
/*!50530 SET @@SESSION.PSEUDO_SLAVE_MODE=0*/;
|
2007-09-20 16:31:05 +02:00
|
|
|
use track/*!*/;
|
|
|
|
|
SET TIMESTAMP=1190087942/*!*/;
|
|
|
|
|
SET @@session.foreign_key_checks=1, @@session.sql_auto_is_null=1, @@session.unique_checks=1/*!*/;
|
|
|
|
|
SET @@session.sql_mode=0/*!*/;
|
|
|
|
|
SET @@session.character_set_client=8,@@session.collation_connection=8,@@session.collation_server=8/*!*/;
|
|
|
|
|
SET @@session.time_zone='UTC'/*!*/;
|
|
|
|
|
INSERT INTO visits (myid, user_id, src, ip, cc, org, ref, time, host, entry, visit_exit, visit_start)
|
|
|
|
|
VALUES ('3m3l4rhs6do0sf5p1i9lr94g928a272v', '', '', INET_ATON('71.118.124.98'), '', '', 'http://dev.mysql.com/downloads/connector/j/3.0.html', NULL, 'dev.mysql.com', '/get/Downloads/Connector-J/mysql-connector-java-3.0.17-ga.zip/from/pick', '/get/Downloads/Connector-J/mysql-connector-java-3.0.17-ga.zip/from/pick', NOW())/*!*/;
|
|
|
|
|
# at 164171293
|
|
|
|
|
|
|
|
|
|
--delimiter ;
|
|
|
|
|
|
|
|
|
|
SELECT * FROM visits;
|
|
|
|
|
SELECT * FROM visits_events;
|
2007-10-01 12:10:46 +02:00
|
|
|
|
WL#5151: Conversion between different types when replicating
Row-based replication requires the types of columns on the
master and slave to be approximately the same (some safe
conversions between strings are allowed), but does not
allow safe conversions between fields of similar types such
as TINYINT and INT.
This patch implement type conversions between similar fields
on the master and slave.
The conversions are controlled using a new variable
SLAVE_TYPE_CONVERSIONS of type SET('ALL_LOSSY','ALL_NON_LOSSY').
Non-lossy conversions are any conversions that do not run the
risk of losing any information, while lossy conversions can
potentially truncate the value. The column definitions are
checked to decide if the conversion is acceptable.
If neither conversion is enabled, it is required that the
definitions of the columns are identical on master and slave.
Conversion is done by creating an internal conversion table,
unpacking the master data into it, and then copy the data to
the real table on the slave.
.bzrignore:
New files added
client/Makefile.am:
New files added
client/mysqlbinlog.cc:
Functions in rpl_utility.cc is now needed by mysqlbinlog.cc.
libmysqld/Makefile.am:
New files added
mysql-test/extra/rpl_tests/check_type.inc:
Test include file to check a single type conversion.
mysql-test/extra/rpl_tests/rpl_extraSlave_Col.test:
Switching to use INT instead of TEXT for column that should not have matching types.
mysql-test/extra/rpl_tests/rpl_row_basic.test:
Adding code to enable type conversions for BIT tests since InnoDB
cannot handle them properly due to incorrect information stored as
metadata.
mysql-test/extra/rpl_tests/type_conversions.test:
Test file to check a set of type conversions
with current settings of slave_type_conversions.
mysql-test/suite/rpl/t/rpl_typeconv.test:
Test file to test conversions from master to slave with
all possible values for slave_type_conversions.
The test also checks that the slave_type_conversions
variable works as expected.
sql/field.cc:
Changing definition of compatible_field_size to both check if
two field with identical base types are compatible and give an
order between them if they are compatible.
This only implement checking on the slave, so it will not affect
replication from an old master to a new slave.
sql/field.h:
Changing prototypes for functions:
- compatible_field_size()
- init_for_tmp_table()
- row_pack_length()
sql/log_event.cc:
Changing compability checks to build a conversion table if the fields
are compatible, but does not have the same base type.
sql/log_event_old.cc:
Changing compability checks to build a conversion table if the fields
are compatible, but does not have the same base type.
sql/mysql_priv.h:
Adding global option variable for SLAVE_TYPE_CONVERSIONS
sql/mysqld.cc:
Adding SLAVE_TYPE_CONVERSIONS global server variable.
sql/rpl_record.cc:
Changing unpack_row to use the conversion table if present.
sql/rpl_rli.h:
Removing function get_tabledef and replacing it with get_table_data().
This function retrieve data for table opened for replication, not just
table definition.
sql/rpl_utility.cc:
Function table_def::compatible_with is changed to compare table on master
and slave for compatibility and generate a conversions table if they are
compatible.
Computing real type of fields from metadata for ENUM and SET types.
Computing pack_length correctly for ENUM, SET, and BLOB types.
Adding optimization to not check compatibility if no
slave type conversions are enabled.
sql/rpl_utility.h:
Changing prototypes since implementation has changed.
Modifying table_def::type() to return real type instead of stored type.
sql/set_var.cc:
Adding SLAVE_TYPE_CONVERSIONS variable.
sql/set_var.h:
Adding SLAVE_TYPE_CONVERSIONS variable.
sql/share/errmsg.txt:
Adding error messages for slave type conversions.
sql/sql_class.h:
Adding SLAVE_TYPE_CONVERSIONS variable.
sql/sql_select.cc:
Correcting create_virtual_tmp_table() to compute null bit positions
correctly in the presence of bit fields.
2009-12-14 12:04:55 +01:00
|
|
|
SET GLOBAL SLAVE_TYPE_CONVERSIONS = @saved_slave_type_conversions;
|
|
|
|
|
|
2007-10-01 12:10:46 +02:00
|
|
|
# Cleanup
|
|
|
|
|
DROP DATABASE track;
|
2007-09-21 08:13:52 +02:00
|
|
|
sync_slave_with_master;
|
WL#5151: Conversion between different types when replicating
Row-based replication requires the types of columns on the
master and slave to be approximately the same (some safe
conversions between strings are allowed), but does not
allow safe conversions between fields of similar types such
as TINYINT and INT.
This patch implement type conversions between similar fields
on the master and slave.
The conversions are controlled using a new variable
SLAVE_TYPE_CONVERSIONS of type SET('ALL_LOSSY','ALL_NON_LOSSY').
Non-lossy conversions are any conversions that do not run the
risk of losing any information, while lossy conversions can
potentially truncate the value. The column definitions are
checked to decide if the conversion is acceptable.
If neither conversion is enabled, it is required that the
definitions of the columns are identical on master and slave.
Conversion is done by creating an internal conversion table,
unpacking the master data into it, and then copy the data to
the real table on the slave.
.bzrignore:
New files added
client/Makefile.am:
New files added
client/mysqlbinlog.cc:
Functions in rpl_utility.cc is now needed by mysqlbinlog.cc.
libmysqld/Makefile.am:
New files added
mysql-test/extra/rpl_tests/check_type.inc:
Test include file to check a single type conversion.
mysql-test/extra/rpl_tests/rpl_extraSlave_Col.test:
Switching to use INT instead of TEXT for column that should not have matching types.
mysql-test/extra/rpl_tests/rpl_row_basic.test:
Adding code to enable type conversions for BIT tests since InnoDB
cannot handle them properly due to incorrect information stored as
metadata.
mysql-test/extra/rpl_tests/type_conversions.test:
Test file to check a set of type conversions
with current settings of slave_type_conversions.
mysql-test/suite/rpl/t/rpl_typeconv.test:
Test file to test conversions from master to slave with
all possible values for slave_type_conversions.
The test also checks that the slave_type_conversions
variable works as expected.
sql/field.cc:
Changing definition of compatible_field_size to both check if
two field with identical base types are compatible and give an
order between them if they are compatible.
This only implement checking on the slave, so it will not affect
replication from an old master to a new slave.
sql/field.h:
Changing prototypes for functions:
- compatible_field_size()
- init_for_tmp_table()
- row_pack_length()
sql/log_event.cc:
Changing compability checks to build a conversion table if the fields
are compatible, but does not have the same base type.
sql/log_event_old.cc:
Changing compability checks to build a conversion table if the fields
are compatible, but does not have the same base type.
sql/mysql_priv.h:
Adding global option variable for SLAVE_TYPE_CONVERSIONS
sql/mysqld.cc:
Adding SLAVE_TYPE_CONVERSIONS global server variable.
sql/rpl_record.cc:
Changing unpack_row to use the conversion table if present.
sql/rpl_rli.h:
Removing function get_tabledef and replacing it with get_table_data().
This function retrieve data for table opened for replication, not just
table definition.
sql/rpl_utility.cc:
Function table_def::compatible_with is changed to compare table on master
and slave for compatibility and generate a conversions table if they are
compatible.
Computing real type of fields from metadata for ENUM and SET types.
Computing pack_length correctly for ENUM, SET, and BLOB types.
Adding optimization to not check compatibility if no
slave type conversions are enabled.
sql/rpl_utility.h:
Changing prototypes since implementation has changed.
Modifying table_def::type() to return real type instead of stored type.
sql/set_var.cc:
Adding SLAVE_TYPE_CONVERSIONS variable.
sql/set_var.h:
Adding SLAVE_TYPE_CONVERSIONS variable.
sql/share/errmsg.txt:
Adding error messages for slave type conversions.
sql/sql_class.h:
Adding SLAVE_TYPE_CONVERSIONS variable.
sql/sql_select.cc:
Correcting create_virtual_tmp_table() to compute null bit positions
correctly in the presence of bit fields.
2009-12-14 12:04:55 +01:00
|
|
|
|
2007-10-01 12:10:46 +02:00
|
|
|
--echo End of 5.1 tests
|
BUG#49978: Replication tests don't clean up replication state at the end
Major replication test framework cleanup. This does the following:
- Ensure that all tests clean up the replication state when they
finish, by making check-testcase check the output of SHOW SLAVE STATUS.
This implies:
- Slave must not be running after test finished. This is good
because it removes the risk for sporadic errors in subsequent
tests when a test forgets to sync correctly.
- Slave SQL and IO errors must be cleared when test ends. This is
good because we will notice if a test gets an unexpected error in
the slave threads near the end.
- We no longer have to clean up before a test starts.
- Ensure that all tests that wait for an error in one of the slave
threads waits for a specific error. It is no longer possible to
source wait_for_slave_[sql|io]_to_stop.inc when there is an error
in one of the slave threads. This is good because:
- If a test expects an error but there is a bug that causes
another error to happen, or if it stops the slave thread without
an error, then we will notice.
- When developing tests, wait_for_*_to_[start|stop].inc will fail
immediately if there is an error in the relevant slave thread.
Before this patch, we had to wait for the timeout.
- Remove duplicated and repeated code for setting up unusual replication
topologies. Now, there is a single file that is capable of setting
up arbitrary topologies (include/rpl_init.inc, but
include/master-slave.inc is still available for the most common
topology). Tests can now end with include/rpl_end.inc, which will clean
up correctly no matter what topology is used. The topology can be
changed with include/rpl_change_topology.inc.
- Improved debug information when tests fail. This includes:
- debug info is printed on all servers configured by include/rpl_init.inc
- User can set $rpl_debug=1, which makes auxiliary replication files
print relevant debug info.
- Improved documentation for all auxiliary replication files. Now they
describe purpose, usage, parameters, and side effects.
- Many small code cleanups:
- Made have_innodb.inc output a sensible error message.
- Moved contents of rpl000017-slave.sh into rpl000017.test
- Added mysqltest variables that expose the current state of
disable_warnings/enable_warnings and friends.
- Too many to list here: see per-file comments for details.
client/mysqltest.cc:
Added the following variables:
$ENABLED_WARNINGS
$ENABLED_QUERY_LOG
$ENABLED_RESULT_LOG
$ENABLED_ABORT_ON_ERROR
$ENABLED_INFO
$ENABLED_METADATA
Each variable is 0 or 1, depending on if the corresponding
mysqltest feature is on or off.
mysql-test/extra/rpl_tests/rpl_EE_err.test:
Made test clean up after itself and removed outdated comments.
mysql-test/extra/rpl_tests/rpl_auto_increment.test:
- Use rpl_reset.inc instead of master-slave-reset.inc
- diff_tables.inc now takes only one parameter.
Made test clean up after itself and removed outdated comments.
mysql-test/extra/rpl_tests/rpl_auto_increment_insert_view.test:
diff_tables.inc now takes only one parameter.
mysql-test/extra/rpl_tests/rpl_auto_increment_invoke_trigger.test:
diff_tables.inc now takes only one parameter.
mysql-test/extra/rpl_tests/rpl_autoinc_func_invokes_trigger.test:
diff_tables.inc now takes only one parameter.
mysql-test/extra/rpl_tests/rpl_charset.test:
Made test clean up after itself and removed unnecessary cleanup in beginning.
mysql-test/extra/rpl_tests/rpl_commit_after_flush.test:
cosmetic fixes
mysql-test/extra/rpl_tests/rpl_conflicts.test:
cosmetic fixes
mysql-test/extra/rpl_tests/rpl_ddl.test:
Don't clean up replication here since this file does not setup
replication. The main test now has to both setup and clean up
replication.
cosmetic fixes
mysql-test/extra/rpl_tests/rpl_deadlock.test:
make test clean up after itself
mysql-test/extra/rpl_tests/rpl_extra_col_master.test:
cosmetic fixes
mysql-test/extra/rpl_tests/rpl_extra_col_slave.test:
made test clean up after itself
cosmetic fixes
mysql-test/extra/rpl_tests/rpl_failed_optimize.test:
made test clean up after itself
mysql-test/extra/rpl_tests/rpl_flsh_tbls.test:
made test clean up after itself
mysql-test/extra/rpl_tests/rpl_foreign_key.test:
made test clean up after itself
mysql-test/extra/rpl_tests/rpl_get_master_version_and_clock.test:
- Replace 'start slave; wait_for_slave_to_start.inc' by
include/start_slave.inc.
- Use new file rpl_connect.inc to reconnect on all connections, since the
connections are used by rpl_end.inc.
- Use wait_for_slave_param.inc instead of wait_for_slave_io_to_start.inc,
since wait_for_slave_io_to_start.inc now fails if the IO thread has
an error. In this particular test case, it is normal that the IO thread
has an error.
- Changed wait_for_slave_io_error.inc so that it waits
for the IO thread to stop. However, in this test case,
the IO thread only gets a non-fatal error, so it does
not stop. So we set $slave_io_error_is_nonfatal=1 to
prevent wait_for_slave_io_error.inc from waiting.
mysql-test/extra/rpl_tests/rpl_insert_id.test:
made test clean up after itself
cosmetic fixes
mysql-test/extra/rpl_tests/rpl_insert_id_pk.test:
made test clean up after itself
cosmetic fixes
mysql-test/extra/rpl_tests/rpl_loaddata.test:
- Use wait_for_slave_sql_error.inc to wait for errors
instead of wait_for_slave_sql_to_stop.inc
- Use check_slave_no_error.inc instead of print errors
to the log.
- Use rpl_reset.inc instead of master-slave-reset.inc
This means we have to clear the error from the slave
threads by calling RESET SLAVE explicitly.
- diff_tables.inc now takes only one parameter.
mysql-test/extra/rpl_tests/rpl_log.test:
replace master-slave-reset.inc by rpl_reset.inc
mysql-test/extra/rpl_tests/rpl_max_relay_size.test:
made test clean up after itself
cosmetic fix
mysql-test/extra/rpl_tests/rpl_multi_query.test:
made test clean up after itself
cosmetic fixes
mysql-test/extra/rpl_tests/rpl_multi_update.test:
made test clean up after itself
cosmetic fixes
mysql-test/extra/rpl_tests/rpl_ndb_apply_status.test:
replace master-slave-reset.inc by rpl_reset.inc
mysql-test/extra/rpl_tests/rpl_not_null.test:
- replace master-slave-reset.inc by rpl_reset.inc
- diff_tables.inc now takes only one parameter.
mysql-test/extra/rpl_tests/rpl_record_compare.test:
- replace master-slave-reset.inc by rpl_reset.inc
- diff_tables.inc now takes only one parameter.
mysql-test/extra/rpl_tests/rpl_reset_slave.test:
- replace wait_for_slave_io_error.inc+stop_slave.inc by
wait_for_slave_io_error_and_stop.inc+stop_slave_sql.inc
since stop_slave.inc now fails when the io thread has an
error.
- replace stop_slave.inc by STOP SLAVE +
wait_for_slave_sql_to_stop.inc +
wait_for_slave_param. stop_slave.inc would fail since
the IO thread has an error.
- add include/rpl_end.inc to clean up replication state
mysql-test/extra/rpl_tests/rpl_row_UUID.test:
Don't clean up replication here since this file does not setup
replication. The main test now has to both setup and clean up
replication.
mysql-test/extra/rpl_tests/rpl_row_basic.test:
- replaced reset_master_and_slave.inc by rpl_reset.inc
- replaced sequence of reset master+reset slave by rpl_reset.inc
- diff_tables.inc now takes only one parameter.
mysql-test/extra/rpl_tests/rpl_row_delayed_ins.test:
made test clean up after itself
cosmetic fixes
mysql-test/extra/rpl_tests/rpl_row_sp002.test:
made test clean up after itself
cosmetic fixes
mysql-test/extra/rpl_tests/rpl_row_sp007.test:
made test clean up after itself
cosmetic fixes
mysql-test/extra/rpl_tests/rpl_set_null.test:
- replaced master-slave-reset.inc by rpl_reset.inc
- diff_tables.inc now takes only one parameter.
mysql-test/extra/rpl_tests/rpl_stm_EE_err2.test:
- Made test clean up replication state.
mysql-test/extra/rpl_tests/rpl_stm_create_if_not_exists.test:
replaced rpl_diff_tables.inc by diff_tables.inc
mysql-test/extra/rpl_tests/rpl_stop_slave.test:
changed protocol for diff_tables.inc
mysql-test/extra/rpl_tests/rpl_sv_relay_space.test:
made test clean up after itself
cosmetic fixes
mysql-test/extra/rpl_tests/rpl_test_framework.inc:
Auxiliary file used by rpl_test_framework.test.
This checks that rpl_change_topology.inc works correctly.
mysql-test/extra/rpl_tests/rpl_truncate.test:
made test clean up after itself
cosmetic fixes
mysql-test/extra/rpl_tests/rpl_truncate_helper.test:
- replace reset_master_and_slave.inc by rpl_reset.inc
- diff_tables.inc now takes only one parameter.
mysql-test/include/analyze-sync_with_master.test:
- improved debug output printed when sync_slave_with_master or
sync_with_master fails
- Added documentation
mysql-test/include/assert.inc:
Added file to facilitate assertions.
mysql-test/include/begin_include_file.inc:
New auxiliary file to be used by replication helper files like
rpl_init.inc, stop_slave.inc, wait_for_slave_*.inc, etc. Such
helper files should source rpl_begin_include_file.inc at the
beginning and rpl_end_include_file.inc at the end. That adds the
following features:
- When a test sources the file, the file name is printed to the
result file. This is good because it makes result files easier to
follow.
- When a helper file sources a second helper file recursively, then
the name of the second file is not printed. This is good because
it would make the result file harder to follow if all the internal
calls of all helper files were printed.
- When $rpl_debug is set, all internal calls are printed to the
result file. This is good because it helps when debugging test
cases. (With $rpl_debug=1, many of the helper files now print other
relevant debug info too.)
- When a file needs to turn off the query log or the warning log
(disable_query_log/disable_warnings), then the file can tell
rpl_begin_include_file.inc about it. Then rpl_begin_include_file.inc
will turn off the log correctly, and rpl_end_include_file.inc
will turn on the log correctly. Note that if rpl_a.inc sources
rpl_b.inc and both files need to turn off the log, then the
log is not turned on when rpl_b.inc ends (because rpl_a.inc
still needs the log off). This makes it easier to program
replication helper files.
mysql-test/include/check-testcase.test:
Made check-testcase ensure that the slave status is reset
after the test has finished.
mysql-test/include/check_slave_is_running.inc:
- Use existing framework (check_slave_param.inc) instead of ad-hoc code
to check value of slave parameters.
- Use rpl_begin_include_file.inc to improve debug capabilities.
- improve documentation.
mysql-test/include/check_slave_no_error.inc:
- Use rpl_begin_include_file.inc to improve debug capabilities.
- improve documentation.
mysql-test/include/check_slave_param.inc:
- Use rpl_begin_include_file.inc to improve debug capabilities.
- improve documentation.
mysql-test/include/cleanup_fake_relay_log.inc:
- Use RESET SLAVE instead of manual file removal. This also
resets other replication state.
- verify that RESET SLAVE correctly removed files.
mysql-test/include/diff_tables.inc:
- Use rpl_begin_include_file.inc to improve debug capabilities.
- Improved documentation.
- file now supports an arbitrary number of tables
(not just two). The tables are now given as a comma-separated
list instead of as two variables.
- You no longer have to specify database name for each table.
If no database is specified, it defaults to the current
database.
- File now restores the connection at the end.
mysql-test/include/end_include_file.inc:
New file to be sourced at the end of auxiliary replication include
files. See include/rpl_begin_include_file.inc for details.
mysql-test/include/file_does_not_exist.inc:
Added .inc file to check that a given file is removed.
mysql-test/include/force_restart.inc:
Added file to force server restart after test
mysql-test/include/force_restart_if_skipped.inc:
Added file to force server restart after test, if the test is skipped
mysql-test/include/have_innodb.inc:
Made have_innodb.inc print sensible message when innodb is
not supported.
mysql-test/include/io_thd_fault_injection.inc:
Use rpl_server_restart.inc instead of restart_mysqld.inc in rpl tests
mysql-test/include/kill_query_and_diff_master_slave.inc:
Renamed diff_master_slave.inc to rpl_diff.inc
mysql-test/include/master-slave.inc:
- Use new rpl_init.inc file
- Now, we don't do 'drop table' in master-slave.inc any more. That's good
because drop table has nothing to do with configuring replication servers.
- master-slave.inc now supports the additional parameter
$rpl_server_count. By default, master-slave.inc only
configures two servers; if $rpl_server_count is set, it
configures that many servers. Only the second server is
a slave; the rest are not part of the replication topology.
mysql-test/include/mtr_check.sql:
Removed unneeded SP (use include/force_restart.inc instead)
mysql-test/include/mysqldump.inc:
diff_tables.inc now takes only one parameter.
mysql-test/include/ndb_master-slave.inc:
use master-slave.inc instead of ad-hoc calls to 'connect'
mysql-test/include/ndb_master-slave_2ch.inc:
use rpl_init.inc instead of ad-hoc setup
mysql-test/include/ndb_not_readonly.inc:
turn off query log while executing this script.
this was previously done by the caller. now it's done in the script.
mysql-test/include/report-features.test:
add newline at end of file
mysql-test/include/reset_master_and_slave.inc:
rpl_reset.inc replaces this file
mysql-test/include/restart_mysqld.inc:
force caller to use rpl_restart_server.inc instead if replication is configured
mysql-test/include/rpl_change_topology.inc:
New file to change replication topology on the fly. This is used
by rpl_init.inc internally, but is also used by test cases
that need to change topology (e.g., rpl.rpl_circular_for_4_hosts, which
reconfigures the topology to make a failover).
mysql-test/include/rpl_connect.inc:
New file to create a named connection. This file knows about a number
of "standard" connections (master, slave, server_1, etc), and knows how
each of them should normally be created. This is mostly used internally
(e.g., by rpl_init.inc, master-slave.inc, ndb_master-slave_2ch.inc etc),
but can also be used by tests that need to bring a connection up after
disconnecting.
mysql-test/include/rpl_connection.inc:
New file to change connection. This prints the name of the connection.
However, for files that source rpl_begin_include_file.inc, it does not
print the name of the connection unless $rpl_debug=1. This is good
because printing something every time the .inc file changed connection
would make the result log harder to read.
mysql-test/include/rpl_diff.inc:
- Made file capable to compare many servers
- Hence renamed it to rpl_diff.inc
- If no server list is specified, use all servers from
server_1 to server_$rpl_server_count
- It now writes the statement to file before executing it.
That means it will be subject to SQL string interpolation,
but not shell string interpolation (which may be
platform-dependent)
mysql-test/include/rpl_diff_tables.inc:
Removed this file, since its functionality has been merged into
diff_tables.inc.
mysql-test/include/rpl_end.inc:
Renamed master-slave-end.inc to rpl_end.inc, and made it
work with arbitrary replication topologies (as configured
with rpl_init.inc and possibly rpl_change_topology.inc). Also
made it assert that no slave thread has an error. Made it
assert that no slave thread is stopped, unless
$rpl_only_running_threads=1.
mysql-test/include/rpl_for_each_slave.inc:
New test script that executes a command once for each slave.
This is used by include/rpl_start_slaves.inc and
include/rpl_stop_slaves.inc and could possibly be useful for other
custom scripts too.
mysql-test/include/rpl_generate_sync_chain.inc:
New file that computes the variable $rpl_sync_chain. This variable
determines in what order slaves are synced by include/rpl_sync.inc.
The variable is recomputed the first time that include/rpl_sync.inc
is called after rpl_change_topology.inc.
mysql-test/include/rpl_init.inc:
Made file work for arbitrary topologies instead of just 4-server
circle. This file is used by master-slave.inc, rpl_master-slave_2ch.inc
etc, and also by tests that need other specific replication topologies.
mysql-test/include/rpl_reconnect.inc:
New auxiliary file that will reconnect many clients to a given
server. All clients configured by rpl_init.inc will reconnect.
mysql-test/include/rpl_reset.inc:
Made file work for arbitrary replication topologies,
check for errors, and sync all threads. Also removed
'drop table' because that has nothing to do with replication.
mysql-test/include/rpl_restart_server.inc:
New auxiliary file that restarts a server.
mysql-test/include/rpl_start_server.inc:
New auxiliary file that starts a server that has been shut down.
mysql-test/include/rpl_start_slaves.inc:
New auxiliary file to start all slaves configured by rpl_init.inc
This is used internally by rpl_init.inc but may also be used by tests
that want to bring all slaves up.
mysql-test/include/rpl_stop_server.inc:
New auxiliary file that shuts down a server.
mysql-test/include/rpl_stop_slaves.inc:
New auxiliary file to stop all slaves configured rpl_init.inc. This
is used internally by rpl_end.inc, but may also be used by tests that
want to stop all slaves.
mysql-test/include/rpl_sync.inc:
Made file work for arbitrary replication topologies (as configured
by rpl_init.inc and possibly rpl_change_topology.inc) instead of
just 4-server circle.
mysql-test/include/save_master_pos.inc:
Auxiliary file to save the master position.
mysql-test/include/setup_fake_relay_log.inc:
- Moved complicated logic to write to file into
write_var_to_file.inc, so that it can be re-used by
other tests.
- Added call to show_rpl_debug_info and die in error case.
mysql-test/include/show_rpl_debug_info.inc:
- Made file print NOW()
- Made file print both SHOW MASTER STATUS, SHOW SLAVE HOSTS,
and SHOW SLAVE STATUS.
- Made file print debug info for all servers configured by
rpl_init.inc
mysql-test/include/show_slave_status.inc:
- Made file use echo instead of SELECT to print variables.
- Improved comments.
- Use variable names that are less likely to be used by other tests.
mysql-test/include/start_slave.inc:
- Made test use rpl_begin_include_file.inc to improve debug
capabilities.
- improved documentation
mysql-test/include/stop_slave.inc:
- Made script capable to detect which threads are running
and stop only those.
- Improved documentation
mysql-test/include/stop_slave_io.inc:
Added file to stop the slave IO thread.
mysql-test/include/stop_slave_sql.inc:
Added file to stop the slave SQL thread.
mysql-test/include/sync_io_with_master.inc:
Added file to sync the IO thread of the current connection, up to
a previously saved position.
mysql-test/include/sync_slave_io_with_master.inc:
- Made file work with arbitrarily-named connections.
- Made file use rpl_begin_include_file.inc to improve debug
capabilities.
mysql-test/include/sync_slave_sql_with_io.inc:
Added file to sync only the SQL thread, up to the position copied
in the IO thread.
mysql-test/include/wait_for_query_to_fail.inc:
Added file to wait for a query to fail.
mysql-test/include/wait_for_slave_io_error.inc:
- Use rpl_begin_include_file.inc to improve debug capabilities.
- Use existing atom include/show_slave_status.inc to print error
message.
- Improve comments.
******
- This file now waits until the slave IO thread has completely
stopped (to avoid races in tests).
- Some IO thread errors are non-fatal and don't cause the slave
IO thread to stop. To allow tests to wait for such errors, we
add the parameters $slave_io_error_is_nonfatal. If
$slave_io_error_is_nonfatal is set, this script does not wait
for the IO thread to stop.
mysql-test/include/wait_for_slave_io_to_start.inc:
- Made script fail if the IO thread has an error.
- Use rpl_begin_include_file.inc to improve debug capabilities.
- Improved documentation.
mysql-test/include/wait_for_slave_io_to_stop.inc:
- Fail if server is not configured as slave. Previously, the
script accepted servers not configured as slave because there
was cleanup code called from master-slave.inc that would execute
STOP SLAVE on both master and slave. Now all tests have to
clean up after themselves, so we don't have to call stop slave
at the beginning of tests. Hence, we disallow calling this
script on servers not configured as slaves.
- Use rpl_begin_include_file.inc to improve debug capabilities.
- Improved documentation.
mysql-test/include/wait_for_slave_param.inc:
- Added $slave_error_param. This variable can be set to
Slave_IO_Errno or Slave_SQL_Errno, in which case the
script fails if the corresponding column in the output from
SHOW SLAVE STATUS is nonzero.
- Replaced exit by die.
- Made it print timeout seconds correctly in error message.
- Removed $slave_error_message. This is not needed.
- Use rpl_begin_include_file.inc for better debug capabilities.
mysql-test/include/wait_for_slave_sql_error.inc:
- Use rpl_begin_include_file.inc for better debug capabilities.
- Improve documentation
- Use existing atom show_slave_status.inc to print error.
mysql-test/include/wait_for_slave_sql_error_and_skip.inc:
- Use rpl_begin_include_file.inc and rpl_connection.inc for better
debug capabilities.
- Improve documentation
mysql-test/include/wait_for_slave_sql_to_start.inc:
- Use rpl_begin_include_file.inc for better debug capabilities.
- Improve documentation
mysql-test/include/wait_for_slave_sql_to_stop.inc:
- Fail if Last_SQL_Errno is nonzero.
- Fail if server is not configured as slave. Previously, the
script accepted servers not configured as slave because there
was cleanup code called from master-slave.inc that would execute
STOP SLAVE on both master and slave. Now all tests have to
clean up after themselves, so we don't have to call stop slave
at the beginning of tests. Hence, we disallow calling this
script on servers not configured as slaves.
- Use rpl_begin_include_file.inc for better debug capabilities.
- Improve documentation
mysql-test/include/wait_for_slave_to_start.inc:
- Use rpl_begin_include_file.inc for better debug capabilities.
- Improve documentation
mysql-test/include/wait_for_slave_to_stop.inc:
- Use rpl_begin_include_file.inc for better debug capabilities.
- Improve documentation
mysql-test/include/write_var_to_file.inc:
Added file to write contents of a mysqltest variable to file.
(This was previously in setup_fake_relay_log.inc)
mysql-test/mysql-test-run.pl:
Allow tests to require restart in case the test is skipped.
mysql-test/r/init_file.result:
updated result file
mysql-test/r/mysqldump_restore.result:
update result file
mysql-test/suite/binlog/r/binlog_drop_if_exists.result:
Moved test that does not use replication to binlog suite.
mysql-test/suite/binlog/r/binlog_old_versions.result:
updated result file
mysql-test/suite/binlog/r/binlog_query_filter_rules.result:
Moved test that does not use replication to binlog suite.
mysql-test/suite/binlog/r/binlog_server_id.result:
Moved test that does not use replication to binlog suite.
mysql-test/suite/binlog/r/binlog_sf.result:
Moved test that does not use replication to binlog suite.
mysql-test/suite/binlog/r/binlog_sql_mode.result:
updated result file
mysql-test/suite/binlog/t/binlog_auto_increment_bug33029-master.opt:
This test replicates, so it should be in the rpl suite.
Then we can remove this .opt file too.
mysql-test/suite/binlog/t/binlog_drop_if_exists.test:
Moved test that does not use replication to binlog suite.
mysql-test/suite/binlog/t/binlog_old_versions.test:
cosmetic fixes
mysql-test/suite/binlog/t/binlog_query_filter_rules-master.opt:
Moved test that does not use replication to binlog suite.
mysql-test/suite/binlog/t/binlog_query_filter_rules.test:
Moved test that does not use replication to binlog suite.
mysql-test/suite/binlog/t/binlog_server_id.test:
Moved test that does not use replication to binlog suite.
mysql-test/suite/binlog/t/binlog_sf.test:
Moved test that does not use replication to binlog suite.
Since test sets binlog_format internally, it's useless to
re-run it. Hence we source have_binlog_format_statement.inc
mysql-test/suite/binlog/t/binlog_sql_mode.test:
- Test does not use replication, so we remove master-slave.inc.
- mysqltest magically adds --force-if-open to $MYSQL_BINLOG in test
files that source master-slave.inc. So now we have to add
--force-if-open explicitly.
mysql-test/suite/bugs/t/rpl_bug12691.test:
made test clean up after itself
cosmetic fixes
mysql-test/suite/bugs/t/rpl_bug23533.test:
made test clean up after itself
cosmetic fixes
mysql-test/suite/bugs/t/rpl_bug31582.test:
made test clean up after itself
mysql-test/suite/bugs/t/rpl_bug31583.test:
made test clean up after itself
mysql-test/suite/bugs/t/rpl_bug33029.test:
made test clean up after itself
mysql-test/suite/bugs/t/rpl_bug36391.test:
made test clean up after itself
cosmetic fixes
mysql-test/suite/bugs/t/rpl_bug37426.test:
made test clean up after itself
cosmetic fixes
mysql-test/suite/bugs/t/rpl_bug38205.test:
made test clean up after itself
mysql-test/suite/manual/t/rpl_replication_delay.test:
made test clean up after itself
cosmetic fixes
mysql-test/suite/ndb_team/t/rpl_ndb_dd_advance.test:
made test clean up after itself
cosmetic fixes
mysql-test/suite/ndb_team/t/rpl_ndb_extraColMaster.test:
made test clean up after itself
mysql-test/suite/ndb_team/t/rpl_ndb_mix_innodb.test:
made test clean up after itself
cosmetic fixes
mysql-test/suite/parts/r/rpl_partition.result:
updated result file
mysql-test/suite/parts/t/rpl_partition.test:
Make test clean up replication state.
cosmetic fixes
mysql-test/suite/rpl/include/rpl_mixed_ddl.inc:
made test clean up after itself
cosmetic fixes
mysql-test/suite/rpl/include/rpl_mixed_dml.inc:
made test clean up after itself
cosmetic fixes
mysql-test/suite/rpl/r/rpl_000010.result:
update result file
mysql-test/suite/rpl/r/rpl_000011.result:
update result file
mysql-test/suite/rpl/r/rpl_000013.result:
update result file
mysql-test/suite/rpl/r/rpl_000017.result:
update result file
mysql-test/suite/rpl/r/rpl_EE_err.result:
update result file
mysql-test/suite/rpl/r/rpl_LD_INFILE.result:
update result file
mysql-test/suite/rpl/r/rpl_alter.result:
update result file
mysql-test/suite/rpl/r/rpl_alter_db.result:
update result file
mysql-test/suite/rpl/r/rpl_auto_increment.result:
update result file
mysql-test/suite/rpl/r/rpl_auto_increment_11932.result:
update result file
mysql-test/suite/rpl/r/rpl_auto_increment_bug33029.result:
update result file
mysql-test/suite/rpl/r/rpl_auto_increment_update_failure.result:
update result file
mysql-test/suite/rpl/r/rpl_begin_commit_rollback.result:
update result file
mysql-test/suite/rpl/r/rpl_binlog_corruption.result:
Updated result file
mysql-test/suite/rpl/r/rpl_binlog_errors.result:
updated result file
mysql-test/suite/rpl/r/rpl_binlog_grant.result:
update result file
mysql-test/suite/rpl/r/rpl_binlog_max_cache_size.result:
Updated result file
mysql-test/suite/rpl/r/rpl_bit.result:
update result file
mysql-test/suite/rpl/r/rpl_bit_npk.result:
update result file
mysql-test/suite/rpl/r/rpl_blackhole.result:
update result file
mysql-test/suite/rpl/r/rpl_bug26395.result:
update result file
mysql-test/suite/rpl/r/rpl_bug31076.result:
update result file
mysql-test/suite/rpl/r/rpl_bug33931.result:
updated result file
mysql-test/suite/rpl/r/rpl_bug38694.result:
update result file
mysql-test/suite/rpl/r/rpl_change_master.result:
update result file
mysql-test/suite/rpl/r/rpl_charset.result:
update result file
mysql-test/suite/rpl/r/rpl_charset_sjis.result:
update result file
mysql-test/suite/rpl/r/rpl_circular_for_4_hosts.result:
Updated result file
mysql-test/suite/rpl/r/rpl_colSize.result:
update result file
mysql-test/suite/rpl/r/rpl_commit_after_flush.result:
update result file
mysql-test/suite/rpl/r/rpl_concurrency_error.result:
update result file
mysql-test/suite/rpl/r/rpl_conditional_comments.result:
update result file
mysql-test/suite/rpl/r/rpl_create_database.result:
update result file
mysql-test/suite/rpl/r/rpl_create_if_not_exists.result:
update result file
mysql-test/suite/rpl/r/rpl_create_tmp_table_if_not_exists.result:
update result file
mysql-test/suite/rpl/r/rpl_cross_version.result:
Updated result file
mysql-test/suite/rpl/r/rpl_current_user.result:
update result file
mysql-test/suite/rpl/r/rpl_deadlock_innodb.result:
update result file
mysql-test/suite/rpl/r/rpl_delete_no_where.result:
update result file
mysql-test/suite/rpl/r/rpl_do_grant.result:
updated result file
mysql-test/suite/rpl/r/rpl_drop.result:
update result file
mysql-test/suite/rpl/r/rpl_drop_db.result:
update result file
mysql-test/suite/rpl/r/rpl_drop_temp.result:
update result file
mysql-test/suite/rpl/r/rpl_drop_view.result:
update result file
mysql-test/suite/rpl/r/rpl_dual_pos_advance.result:
update result file
mysql-test/suite/rpl/r/rpl_empty_master_crash.result:
update result file
mysql-test/suite/rpl/r/rpl_err_ignoredtable.result:
update result file
mysql-test/suite/rpl/r/rpl_events.result:
update result file
mysql-test/suite/rpl/r/rpl_extra_col_master_innodb.result:
update result file
mysql-test/suite/rpl/r/rpl_extra_col_master_myisam.result:
update result file
mysql-test/suite/rpl/r/rpl_extra_col_slave_innodb.result:
update result file
mysql-test/suite/rpl/r/rpl_extra_col_slave_myisam.result:
update result file
mysql-test/suite/rpl/r/rpl_failed_optimize.result:
update result file
mysql-test/suite/rpl/r/rpl_filter_tables_not_exist.result:
update result file
mysql-test/suite/rpl/r/rpl_flushlog_loop.result:
update result file
mysql-test/suite/rpl/r/rpl_foreign_key_innodb.result:
update result file
mysql-test/suite/rpl/r/rpl_found_rows.result:
update result file
mysql-test/suite/rpl/r/rpl_free_items.result:
update result file
mysql-test/suite/rpl/r/rpl_geometry.result:
update result file
mysql-test/suite/rpl/r/rpl_get_lock.result:
update result file
mysql-test/suite/rpl/r/rpl_get_master_version_and_clock.result:
update result file
mysql-test/suite/rpl/r/rpl_grant.result:
update result file
mysql-test/suite/rpl/r/rpl_idempotency.result:
update result file
mysql-test/suite/rpl/r/rpl_ignore_grant.result:
update result file
mysql-test/suite/rpl/r/rpl_ignore_revoke.result:
update result file
mysql-test/suite/rpl/r/rpl_ignore_table.result:
update result file
mysql-test/suite/rpl/r/rpl_ignore_table_update.result:
update result file
mysql-test/suite/rpl/r/rpl_incident.result:
update result file
mysql-test/suite/rpl/r/rpl_init_slave.result:
update result file
mysql-test/suite/rpl/r/rpl_init_slave_errors.result:
update result file
mysql-test/suite/rpl/r/rpl_innodb.result:
update result file
mysql-test/suite/rpl/r/rpl_innodb_bug28430.result:
update result file
mysql-test/suite/rpl/r/rpl_innodb_bug30888.result:
update result file
mysql-test/suite/rpl/r/rpl_innodb_mixed_ddl.result:
update result file
mysql-test/suite/rpl/r/rpl_innodb_mixed_dml.result:
update result file
mysql-test/suite/rpl/r/rpl_insert.result:
update result file
mysql-test/suite/rpl/r/rpl_insert_id.result:
update result file
mysql-test/suite/rpl/r/rpl_insert_id_pk.result:
update result file
mysql-test/suite/rpl/r/rpl_insert_ignore.result:
update result file
mysql-test/suite/rpl/r/rpl_insert_select.result:
update result file
mysql-test/suite/rpl/r/rpl_invoked_features.result:
update result file
mysql-test/suite/rpl/r/rpl_killed_ddl.result:
update result file
mysql-test/suite/rpl/r/rpl_known_bugs_detection.result:
update result file
mysql-test/suite/rpl/r/rpl_load_from_master.result:
update result file
mysql-test/suite/rpl/r/rpl_load_table_from_master.result:
update result file
mysql-test/suite/rpl/r/rpl_loaddata.result:
update result file
mysql-test/suite/rpl/r/rpl_loaddata_charset.result:
update result file
mysql-test/suite/rpl/r/rpl_loaddata_concurrent.result:
update result file
mysql-test/suite/rpl/r/rpl_loaddata_fatal.result:
update result file
mysql-test/suite/rpl/r/rpl_loaddata_m.result:
update result file
mysql-test/suite/rpl/r/rpl_loaddata_map.result:
update result file
mysql-test/suite/rpl/r/rpl_loaddata_s.result:
update result file
mysql-test/suite/rpl/r/rpl_loaddata_simple.result:
update result file
mysql-test/suite/rpl/r/rpl_loaddata_symlink.result:
update result file
mysql-test/suite/rpl/r/rpl_loaddatalocal.result:
update result file
mysql-test/suite/rpl/r/rpl_loadfile.result:
update result file
mysql-test/suite/rpl/r/rpl_locale.result:
update result file
mysql-test/suite/rpl/r/rpl_log_pos.result:
update result file
mysql-test/suite/rpl/r/rpl_manual_change_index_file.result:
update result file
mysql-test/suite/rpl/r/rpl_many_optimize.result:
update result file
mysql-test/suite/rpl/r/rpl_master_pos_wait.result:
update result file
mysql-test/suite/rpl/r/rpl_misc_functions.result:
update result file
mysql-test/suite/rpl/r/rpl_mixed_bit_pk.result:
update result file
mysql-test/suite/rpl/r/rpl_mixed_ddl_dml.result:
update result file
mysql-test/suite/rpl/r/rpl_multi_delete.result:
update result file
mysql-test/suite/rpl/r/rpl_multi_delete2.result:
update result file
mysql-test/suite/rpl/r/rpl_multi_engine.result:
update result file
mysql-test/suite/rpl/r/rpl_multi_update.result:
update result file
mysql-test/suite/rpl/r/rpl_multi_update2.result:
update result file
mysql-test/suite/rpl/r/rpl_multi_update3.result:
update result file
mysql-test/suite/rpl/r/rpl_multi_update4.result:
update result file
mysql-test/suite/rpl/r/rpl_mysql_upgrade.result:
update result file
mysql-test/suite/rpl/r/rpl_name_const.result:
update result file
mysql-test/suite/rpl/r/rpl_nondeterministic_functions.result:
update result file
mysql-test/suite/rpl/r/rpl_not_null_innodb.result:
update result file
mysql-test/suite/rpl/r/rpl_not_null_myisam.result:
update result file
mysql-test/suite/rpl/r/rpl_optimize.result:
update result file
mysql-test/suite/rpl/r/rpl_packet.result:
update result file
mysql-test/suite/rpl/r/rpl_plugin_load.result:
update result file
mysql-test/suite/rpl/r/rpl_ps.result:
update result file
mysql-test/suite/rpl/r/rpl_rbr_to_sbr.result:
update result file
mysql-test/suite/rpl/r/rpl_read_only.result:
update result file
mysql-test/suite/rpl/r/rpl_relay_space_innodb.result:
update result file
mysql-test/suite/rpl/r/rpl_relay_space_myisam.result:
update result file
mysql-test/suite/rpl/r/rpl_relayrotate.result:
update result file
mysql-test/suite/rpl/r/rpl_relayspace.result:
update result file
mysql-test/suite/rpl/r/rpl_replicate_do.result:
update result file
mysql-test/suite/rpl/r/rpl_replicate_ignore_db.result:
update result file
mysql-test/suite/rpl/r/rpl_report.result:
update result file
mysql-test/suite/rpl/r/rpl_rewrt_db.result:
update result file
mysql-test/suite/rpl/r/rpl_rotate_logs.result:
update result file
mysql-test/suite/rpl/r/rpl_row_001.result:
update result file
mysql-test/suite/rpl/r/rpl_row_4_bytes.result:
update result file
mysql-test/suite/rpl/r/rpl_row_NOW.result:
update result file
mysql-test/suite/rpl/r/rpl_row_USER.result:
update result file
mysql-test/suite/rpl/r/rpl_row_UUID.result:
update result file
mysql-test/suite/rpl/r/rpl_row_basic_11bugs.result:
update result file
mysql-test/suite/rpl/r/rpl_row_basic_2myisam.result:
update result file
mysql-test/suite/rpl/r/rpl_row_basic_3innodb.result:
update result file
mysql-test/suite/rpl/r/rpl_row_basic_8partition.result:
update result file
mysql-test/suite/rpl/r/rpl_row_blob_innodb.result:
update result file
mysql-test/suite/rpl/r/rpl_row_blob_myisam.result:
update result file
mysql-test/suite/rpl/r/rpl_row_colSize.result:
update result file
mysql-test/suite/rpl/r/rpl_row_conflicts.result:
update result file
mysql-test/suite/rpl/r/rpl_row_delayed_ins.result:
update result file
mysql-test/suite/rpl/r/rpl_row_drop.result:
update result file
mysql-test/suite/rpl/r/rpl_row_find_row.result:
update result file
mysql-test/suite/rpl/r/rpl_row_flsh_tbls.result:
update result file
mysql-test/suite/rpl/r/rpl_row_func001.result:
update result file
mysql-test/suite/rpl/r/rpl_row_func002.result:
update result file
mysql-test/suite/rpl/r/rpl_row_func003.result:
update result file
mysql-test/suite/rpl/r/rpl_row_inexist_tbl.result:
updated result file
mysql-test/suite/rpl/r/rpl_row_insert_delayed.result:
update result file
mysql-test/suite/rpl/r/rpl_row_log.result:
update result file
mysql-test/suite/rpl/r/rpl_row_log_innodb.result:
update result file
mysql-test/suite/rpl/r/rpl_row_max_relay_size.result:
update result file
mysql-test/suite/rpl/r/rpl_row_mysqlbinlog.result:
update result file
mysql-test/suite/rpl/r/rpl_row_rec_comp_innodb.result:
update result file
mysql-test/suite/rpl/r/rpl_row_rec_comp_myisam.result:
update result file
mysql-test/suite/rpl/r/rpl_row_reset_slave.result:
update result file
mysql-test/suite/rpl/r/rpl_row_sp001.result:
update result file
mysql-test/suite/rpl/r/rpl_row_sp002_innodb.result:
update result file
mysql-test/suite/rpl/r/rpl_row_sp003.result:
update result file
mysql-test/suite/rpl/r/rpl_row_sp005.result:
update result file
mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result:
update result file
mysql-test/suite/rpl/r/rpl_row_sp007_innodb.result:
update result file
mysql-test/suite/rpl/r/rpl_row_sp008.result:
update result file
mysql-test/suite/rpl/r/rpl_row_sp009.result:
update result file
mysql-test/suite/rpl/r/rpl_row_sp010.result:
update result file
mysql-test/suite/rpl/r/rpl_row_sp011.result:
update result file
mysql-test/suite/rpl/r/rpl_row_sp012.result:
update result file
mysql-test/suite/rpl/r/rpl_row_stop_middle_update.result:
update result file
mysql-test/suite/rpl/r/rpl_row_tabledefs_2myisam.result:
update result file
mysql-test/suite/rpl/r/rpl_row_tabledefs_3innodb.result:
update result file
mysql-test/suite/rpl/r/rpl_row_tbl_metadata.result:
update result file
mysql-test/suite/rpl/r/rpl_row_trig001.result:
update result file
mysql-test/suite/rpl/r/rpl_row_trig002.result:
update result file
mysql-test/suite/rpl/r/rpl_row_trig003.result:
update result file
mysql-test/suite/rpl/r/rpl_row_trig004.result:
update result file
mysql-test/suite/rpl/r/rpl_row_trunc_temp.result:
update result file
mysql-test/suite/rpl/r/rpl_row_unsafe_funcs.result:
update result file
mysql-test/suite/rpl/r/rpl_row_until.result:
update result file
mysql-test/suite/rpl/r/rpl_row_view01.result:
update result file
mysql-test/suite/rpl/r/rpl_row_wide_table.result:
update result file
mysql-test/suite/rpl/r/rpl_server_id1.result:
update result file
mysql-test/suite/rpl/r/rpl_server_id2.result:
update result file
mysql-test/suite/rpl/r/rpl_session_var.result:
update result file
mysql-test/suite/rpl/r/rpl_set_charset.result:
update result file
mysql-test/suite/rpl/r/rpl_set_null_innodb.result:
update result file
mysql-test/suite/rpl/r/rpl_set_null_myisam.result:
update result file
mysql-test/suite/rpl/r/rpl_show_slave_running.result:
update result file
mysql-test/suite/rpl/r/rpl_skip_error.result:
update result file
mysql-test/suite/rpl/r/rpl_slave_grp_exec.result:
update result file
mysql-test/suite/rpl/r/rpl_slave_load_in.result:
update result file
mysql-test/suite/rpl/r/rpl_slave_load_remove_tmpfile.result:
Updated result file
mysql-test/suite/rpl/r/rpl_slave_load_tmpdir_not_exist.result:
updated result file
mysql-test/suite/rpl/r/rpl_slave_skip.result:
update result file
mysql-test/suite/rpl/r/rpl_slave_status.result:
update result file
mysql-test/suite/rpl/r/rpl_slow_query_log.result:
update result file
mysql-test/suite/rpl/r/rpl_sp.result:
update result file
mysql-test/suite/rpl/r/rpl_sp004.result:
update result file
mysql-test/suite/rpl/r/rpl_sp_effects.result:
update result file
mysql-test/suite/rpl/r/rpl_sporadic_master.result:
update result file
mysql-test/suite/rpl/r/rpl_ssl.result:
update result file
mysql-test/suite/rpl/r/rpl_ssl1.result:
update result file
mysql-test/suite/rpl/r/rpl_start_stop_slave.result:
update result file
mysql-test/suite/rpl/r/rpl_stm_000001.result:
update result file
mysql-test/suite/rpl/r/rpl_stm_EE_err2.result:
updated result file
mysql-test/suite/rpl/r/rpl_stm_auto_increment_bug33029.result:
update result file
mysql-test/suite/rpl/r/rpl_stm_binlog_direct.result:
update result file
mysql-test/suite/rpl/r/rpl_stm_conflicts.result:
update result file
mysql-test/suite/rpl/r/rpl_stm_create_if_not_exists.result:
update result file
mysql-test/suite/rpl/r/rpl_stm_flsh_tbls.result:
update result file
mysql-test/suite/rpl/r/rpl_stm_insert_delayed.result:
update result file
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
update result file
mysql-test/suite/rpl/r/rpl_stm_log.result:
update result file
mysql-test/suite/rpl/r/rpl_stm_max_relay_size.result:
update result file
mysql-test/suite/rpl/r/rpl_stm_mixing_engines.result:
update result file
mysql-test/suite/rpl/r/rpl_stm_multi_query.result:
update result file
mysql-test/suite/rpl/r/rpl_stm_no_op.result:
update result file
mysql-test/suite/rpl/r/rpl_stm_reset_slave.result:
update result file
mysql-test/suite/rpl/r/rpl_stm_sql_mode.result:
update result file
mysql-test/suite/rpl/r/rpl_stm_until.result:
update result file
mysql-test/suite/rpl/r/rpl_stop_slave.result:
update result file
mysql-test/suite/rpl/r/rpl_switch_stm_row_mixed.result:
update result file
mysql-test/suite/rpl/r/rpl_temp_table.result:
update result file
mysql-test/suite/rpl/r/rpl_temp_table_mix_row.result:
update result file
mysql-test/suite/rpl/r/rpl_temporary.result:
update result file
mysql-test/suite/rpl/r/rpl_temporary_errors.result:
update result file
mysql-test/suite/rpl/r/rpl_test_framework.result:
updated result file
mysql-test/suite/rpl/r/rpl_timezone.result:
Updated result file
mysql-test/suite/rpl/r/rpl_tmp_table_and_DDL.result:
update result file
mysql-test/suite/rpl/r/rpl_trigger.result:
update result file
mysql-test/suite/rpl/r/rpl_trunc_temp.result:
update result file
mysql-test/suite/rpl/r/rpl_truncate_2myisam.result:
update result file
mysql-test/suite/rpl/r/rpl_truncate_3innodb.result:
update result file
mysql-test/suite/rpl/r/rpl_typeconv_innodb.result:
update result file
mysql-test/suite/rpl/r/rpl_udf.result:
update result file
mysql-test/suite/rpl/r/rpl_user.result:
update result file
mysql-test/suite/rpl/r/rpl_user_variables.result:
update result file
mysql-test/suite/rpl/r/rpl_variables.result:
update result file
mysql-test/suite/rpl/r/rpl_variables_stm.result:
update result file
mysql-test/suite/rpl/r/rpl_view.result:
update result file
mysql-test/suite/rpl/t/rpl000017-slave.sh:
Moved contents of -slave.sh into test.
mysql-test/suite/rpl/t/rpl_000010-slave.opt:
make all rpl tests use prefix rpl_
mysql-test/suite/rpl/t/rpl_000010.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_000011.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_000013.test:
Made test clean up replication state.
Replaced save_master_pos/connection slave/sync_with_master
by sync_slave_with_master.
mysql-test/suite/rpl/t/rpl_000017-slave.opt:
make all rpl tests use prefix rpl_
mysql-test/suite/rpl/t/rpl_000017.test:
Moved contents of -slave.sh into .test
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_EE_err.test:
cosmetic fixes
mysql-test/suite/rpl/t/rpl_LD_INFILE.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_alter.test:
made test clean up after itself
replaced rpl_diff_tables by diff_tables
cosmetic fixes
mysql-test/suite/rpl/t/rpl_alter_db.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_auto_increment.test:
cosmetic fixes
mysql-test/suite/rpl/t/rpl_auto_increment_11932.test:
Made test clean up replication state.
don't drop database twice
mysql-test/suite/rpl/t/rpl_auto_increment_bug33029.test:
- This test replicates, so moved it to rpl suite.
- This test uses a fake relay log, so use
include/setup_fake_relay_log.inc and cleanup_fake_relay_log.inc
instead of ad-hoc code.
- Made test clean up replication state (rpl_end.inc)
mysql-test/suite/rpl/t/rpl_auto_increment_update_failure.test:
- Made test clean up replication state.
- diff_tables.inc now takes only one parameter.
mysql-test/suite/rpl/t/rpl_begin_commit_rollback.test:
renamed rpl_end.inc to master-slave-end.inc
mysql-test/suite/rpl/t/rpl_binlog_corruption-master.opt:
Got rid of useless -master.opt file.
mysql-test/suite/rpl/t/rpl_binlog_corruption.test:
Made test clean up replication state.
Made test execute on slave connection instead of on master connection.
This allows us to get rid of -master.opt file.
mysql-test/suite/rpl/t/rpl_binlog_errors.test:
made test use rpl_restart_server.inc instead of restart_mysqld.inc
mysql-test/suite/rpl/t/rpl_binlog_grant.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_binlog_max_cache_size.test:
- Made test clean up replication state.
- replaced wait_for_slave_sql_to_stop.inc by
wait_for_slave_sql_error_and_skip.inc
- renamed diff_master_slave.inc to rpl_diff.inc and
renamed $diff_statement to $rpl_diff_statement
mysql-test/suite/rpl/t/rpl_bit.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_bit_npk.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_blackhole.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_bug26395.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_bug31076.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_bug33931.test:
Made test clean up replication state.
Made test use source include/master-slave.inc instead of
ad-hoc setup.
mysql-test/suite/rpl/t/rpl_bug38694.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_change_master.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_charset.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_charset_sjis.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_circular_for_4_hosts.cnf:
Use new names of mtr variables (introduced by the changes in
include/circular_rpl_init.inc).
mysql-test/suite/rpl/t/rpl_circular_for_4_hosts.test:
- Use rpl_init.inc instead of circular_rpl_for_4_hosts.inc.
Connections have been renamed (server_[1234] instead of master_[abcd]),
we use rpl_sync.inc instead of circular_rpl_for_4_hosts_sync.inc,
we use the new rpl_end.inc to clean up instead of doing it
manually, and we use rpl_change_topology.inc instead of manual
reconfiguration.
- Added comment to make test understandable.
- the test contained a race condition. server_4 was not sync'ed. This could
cause sql_slave_skip_counter to have the value 1 when the test ended, so
check-testcase would complain. Added 'sync_slave_with_master server_4'.
mysql-test/suite/rpl/t/rpl_colSize.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_commit_after_flush.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_concurrency_error.test:
- Made test clean up replication state.
- renamed diff_master_slave.inc to rpl_diff.inc and
renamed $diff_statement to $rpl_diff_statement
mysql-test/suite/rpl/t/rpl_conditional_comments.test:
made test clean up after itself
new protocol for diff_tables.inc
mysql-test/suite/rpl/t/rpl_create_database.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_create_if_not_exists.test:
renamed master-slave-end.inc to rpl_end.inc
mysql-test/suite/rpl/t/rpl_create_tmp_table_if_not_exists.test:
renamed master-slave-end.inc to rpl_end.inc
mysql-test/suite/rpl/t/rpl_critical_errors.test:
Made test clean up replication state.
Fixed syntax error in test.
mysql-test/suite/rpl/t/rpl_cross_version.test:
Made test clean up replication state.
Made test execute on slave connection instead of on master connection.
This allows us to get rid of -master.opt file.
mysql-test/suite/rpl/t/rpl_current_user.cnf:
use environment variables recognized by rpl_init.inc
mysql-test/suite/rpl/t/rpl_current_user.test:
- Use rpl_init.inc instead of ad-hoc three-server setup.
Hence, rename connection slave2 to server_3
- don't drop lots of things at the beginning of the test
- rpl_diff_tables.inc does not sync any more, so we have to
sync here instead
- renamed $diff_table to $rpl_diff_table and $diff_table_list
to $rpl_diff_table_list
- use diff_tables.inc instead of rpl_diff_tables.inc
mysql-test/suite/rpl/t/rpl_ddl.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_deadlock_innodb.test:
cosmetic fixes
mysql-test/suite/rpl/t/rpl_delete_no_where.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_do_grant.test:
Made test clean up replication state.
renamed master-slave-end.inc to rpl_end.inc
use include/check_slave_no_error.inc instead of ad-hoc construction
mysql-test/suite/rpl/t/rpl_drop.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_drop_db.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_drop_temp.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_drop_view.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_dual_pos_advance.test:
Made test use the new framework for circular replication,
instead of ad-hoc setup.
mysql-test/suite/rpl/t/rpl_empty_master_crash.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_err_ignoredtable.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_events.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_extra_col_master_innodb.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_extra_col_master_myisam.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_extra_col_slave_innodb.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_extra_col_slave_myisam.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_failed_optimize.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_filter_tables_not_exist.test:
renamed master-slave-end.inc to rpl_end.inc
mysql-test/suite/rpl/t/rpl_flushlog_loop-master.opt:
Removed useless options from -master.opt file.
mysql-test/suite/rpl/t/rpl_flushlog_loop-master.sh:
Removed useless -master.sh file
mysql-test/suite/rpl/t/rpl_flushlog_loop-slave.opt:
Removed useless options from -slave.opt file
mysql-test/suite/rpl/t/rpl_flushlog_loop-slave.sh:
Removed useless -slave.sh file
mysql-test/suite/rpl/t/rpl_flushlog_loop.test:
Made test use new framework for circular replication,
instead of ad-hoc setup.
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_foreign_key_innodb.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_found_rows.test:
Made test clean up replication state.
replaced reset_master_and_slave.inc by rpl_reset.inc
mysql-test/suite/rpl/t/rpl_free_items.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_geometry.test:
replaced master-slave-end.inc by rpl_end.inc
mysql-test/suite/rpl/t/rpl_get_lock.test:
Made test clean up replication state.
Replaced save_master_pos+connection slave+sync_with_master
by sync_slave_with_master.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test:
Made test clean up replication state.
Removed last part of test, because it was verbatim identical to
rpl_server_id1.test
mysql-test/suite/rpl/t/rpl_grant.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_idempotency.test:
use check_slave_no_error.inc instead of ad-hoc tests
use wait_for_slave_sql_error.inc instead of wait_for_slave_to_stop.inc
replace master-slave-end.inc by rpl_end.inc
mysql-test/suite/rpl/t/rpl_ignore_grant.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_ignore_revoke.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_ignore_table.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_ignore_table_update.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_incident.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_init_slave.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_init_slave_errors.test:
Made test clean up replication state.
Also replaced call to wait_for_slave_sql_to_stop.inc by
call to wait_for_slave_sql_error.inc
mysql-test/suite/rpl/t/rpl_innodb.test:
replace master-slave-end.inc by rpl_end.inc
mysql-test/suite/rpl/t/rpl_innodb_bug28430.test:
replace master-slave-end.inc by rpl_end.inc
mysql-test/suite/rpl/t/rpl_innodb_bug30888.test:
replace master-slave-end.inc by rpl_end.inc
mysql-test/suite/rpl/t/rpl_innodb_mixed_ddl.test:
cosmetic fixes
mysql-test/suite/rpl/t/rpl_innodb_mixed_dml.test:
cosmetic fixes
mysql-test/suite/rpl/t/rpl_insert.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_insert_id.test:
cosmetic fixes
mysql-test/suite/rpl/t/rpl_insert_id_pk.test:
cosmetic fixes
mysql-test/suite/rpl/t/rpl_insert_ignore.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_insert_select.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_invoked_features.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_killed_ddl.test:
- Made test clean up replication state.
- renamed diff_master_slave.inc to rpl_diff.inc and
renamed $diff_statement to $rpl_diff_statement
mysql-test/suite/rpl/t/rpl_known_bugs_detection.test:
- Made test clean up replication state.
- removed wait_for_slave_sql_to_stop.inc, because it already does
wait_for_slave_sql_error.inc
mysql-test/suite/rpl/t/rpl_load_from_master.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_load_table_from_master.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_loaddata.test:
cosmetic fixes
mysql-test/suite/rpl/t/rpl_loaddata_charset.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_loaddata_fatal.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_loaddata_m.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_loaddata_map.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_loaddata_s.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_loaddata_simple.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_loaddata_symlink.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_loaddatalocal.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_loadfile.test:
- Made test clean up replication state.
- replace reset_master_and_slave.inc by rpl_reset.inc
- diff_tables.inc now takes only one parameter.
- diff_tables.inc also restores the connection to what it was before,
so in this test we have to manually change connection
after sourcing diff_tables.inc
mysql-test/suite/rpl/t/rpl_locale.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_log_pos.test:
Made test clean up replication state.
replace stop_slave.inc by stop_slave_sql.inc since the io thread
is already stopped.
mysql-test/suite/rpl/t/rpl_manual_change_index_file.test:
use wait_for_slave_io_error.inc instead of wait_for_slave_to_stop.inc
replace master-slave-end.inc by rpl_end.inc
mysql-test/suite/rpl/t/rpl_many_optimize.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_master_pos_wait.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_misc_functions.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_mixed_bit_pk.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_mixed_ddl_dml.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_multi_delete.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_multi_delete2.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_multi_engine.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_multi_update.test:
cosmetic fixes
mysql-test/suite/rpl/t/rpl_multi_update2.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_multi_update3.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_multi_update4.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_mysql_upgrade.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_name_const.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_nondeterministic_functions.test:
- Made test clean up replication state.
- diff_tables.inc now takes only one parameter.
- diff_tables.inc also restores the connection to what it was before,
so in this test we have to manually change connection
after sourcing diff_tables.inc
mysql-test/suite/rpl/t/rpl_not_null_innodb.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_not_null_myisam.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_optimize.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_packet.test:
- Made test clean up replication state.
- replace wait_for_slave_io_to_stop.inc by wait_for_slave_io_error.inc
- replace master-slave-reset.inc by rpl_reset.inc + drop table t1.
- replaced save_master_pos/connection slave/sync_with_master
by sync_slave_with_master.
- added comment explaining why we need stop_slave_sql.inc
(we shouldn't need it, it's a bug)
mysql-test/suite/rpl/t/rpl_plugin_load.test:
replace master-slave-end.inc by rpl_end.inc
mysql-test/suite/rpl/t/rpl_ps.test:
Made test clean up replication state.
removed lots os useless junk
mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_read_only.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_relay_space_innodb.test:
cosmetic fixes
mysql-test/suite/rpl/t/rpl_relay_space_myisam.test:
cosmetic fixes
mysql-test/suite/rpl/t/rpl_relayrotate.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_relayspace.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_replicate_do.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_replicate_ignore_db.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_report.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_rewrt_db.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_rotate_logs-slave.opt:
Got rid of unnecessary -slave.opt file
mysql-test/suite/rpl/t/rpl_rotate_logs-slave.sh:
Got rid of unnecessary -slave.sh file
mysql-test/suite/rpl/t/rpl_rotate_logs.test:
- Made test clean up replication state.
- replaced wait_for_slave_sql_to_stop.inc by
wait_for_slave_sql_error_and_skip.inc
- removed useless cleanup at beginning of test
- did not make test use the standard replication framework
(master-slave.inc + rpl_end.inc), because it won't work. i don't
know why.
mysql-test/suite/rpl/t/rpl_row_001.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_4_bytes.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_NOW.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_USER.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_UUID.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_basic_11bugs.test:
Made test clean up replication state.
Removed unnecessary 'set binlog_format'.
replaced master-slave-reset.inc by rpl_reset.inc
mysql-test/suite/rpl/t/rpl_row_basic_2myisam.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_basic_3innodb.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_basic_8partition.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_blob_innodb.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_blob_myisam.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_colSize.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_conflicts.test:
replace master-slave-end.inc by rpl_end.inc
mysql-test/suite/rpl/t/rpl_row_create_table.test:
replace master-slave-end.inc by rpl_end.inc
replace master-slave-reset.inc by rpl_reset.inc
replace long sequence of reset master+reset slave by rpl_reset.inc
mysql-test/suite/rpl/t/rpl_row_delayed_ins.test:
cosmetic fixes
mysql-test/suite/rpl/t/rpl_row_drop.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_find_row.test:
- Made test clean up replication state.
- replace master-slave-reset.inc by rpl_reset.inc
- diff_tables.inc now takes only one parameter.
mysql-test/suite/rpl/t/rpl_row_flsh_tbls.test:
cosmetic fixes
mysql-test/suite/rpl/t/rpl_row_func001.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_func002.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_func003.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_inexist_tbl.test:
Made test clean up replication state.
replace wait_for_slave_sql_to_stop.inc by wait_for_slave_sql_error.inc
mysql-test/suite/rpl/t/rpl_row_insert_delayed.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_log.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_log_innodb.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_mysqlbinlog.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_rec_comp_innodb.test:
Made test clean up replication state
mysql-test/suite/rpl/t/rpl_row_rec_comp_myisam.test:
- replace master-slave-reset.inc by rpl_reset.inc
- Made test clean up replication state
- diff_tables.inc now takes only one parameter.
mysql-test/suite/rpl/t/rpl_row_sp001.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_sp002_innodb.test:
cosmetic fixes
mysql-test/suite/rpl/t/rpl_row_sp003.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_sp005.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_sp006_InnoDB.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_sp007_innodb.test:
cosmetic fixes
mysql-test/suite/rpl/t/rpl_row_sp008.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_sp009.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_sp010.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_sp011.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_sp012.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_stop_middle_update.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_tabledefs_2myisam.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_tabledefs_3innodb.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_tbl_metadata.test:
- replaced master-slave-reset.inc by rpl_reset.inc
- replaced master-slave-end.inc by rpl_end.inc
- diff_tables.inc now takes only one parameter.
mysql-test/suite/rpl/t/rpl_row_trig001.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_trig002.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_trig003.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_trig004.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_trunc_temp.test:
replaced master-slave-end.inc by rpl_end.inc
mysql-test/suite/rpl/t/rpl_row_unsafe_funcs.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_until.test:
Made test clean up replication state.
Removed unused mtr variable $VERSION.
mysql-test/suite/rpl/t/rpl_row_view01.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_row_wide_table.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_server_id1.test:
- Replaced ad-hoc setup of circular replication by call to rpl_init.inc
- Made test clean up replication state.
- Replaced ad-hoc use of wait_for_slave_param.inc by
wait_for_slave_io_error.inc
mysql-test/suite/rpl/t/rpl_server_id2.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_session_var.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_set_charset.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_set_null_innodb.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_set_null_myisam.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_show_slave_running.test:
made test clean up replication state
mysql-test/suite/rpl/t/rpl_skip_error.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_slave_grp_exec.test:
- Made test clean up replication state.
- replaced wait_for_slave_sql_to_stop.inc by wait_for_slave_sql_error.inc
- replaced stop_slave.inc by stop_slave_io.inc where the sql thread
was already stopped.
mysql-test/suite/rpl/t/rpl_slave_load_in.test:
- Made test clean up replication state.
- diff_tables.inc now takes only one parameter.
mysql-test/suite/rpl/t/rpl_slave_load_remove_tmpfile.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_slave_load_tmpdir_not_exist.test:
- Made test clean up replication state.
- Replaced call to wait_for_slave_sql_to_stop.inc by call to
wait_for_slave_sql_error.inc
- Replaced ad-hoc repliction setup by call to master-slave.inc
mysql-test/suite/rpl/t/rpl_slave_skip.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_slave_status.test:
Made test clean up replication state.
replaced check that IO thread has stopped by wait_for_slave_io_error.inc
simplified cleanup code
mysql-test/suite/rpl/t/rpl_slow_query_log.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_sp.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_sp004.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_sp_effects.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_sporadic_master.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_ssl.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_ssl1.test:
Made test clean up replication state.
Replaced save_master_pos+connection slave+sync_slave_with_master
by sync_slave_with_master
mysql-test/suite/rpl/t/rpl_start_stop_slave.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_stm_000001.test:
The include file extra/rpl_tests/rpl_stm_000001.test was only
sourced once, in suite/rpl/t/rpl_stm_000001.test.
Moved extra/rpl_tests/rpl_stm_000001.test to
suite/rpl/t/rpl_stm_000001.test and removed the old
suite/rpl/t/rpl_stm_000001.test.
Also made test clean up replication state, and replaced
wait_for_slave_sql_to_stop.inc by wait_for_slave_sql_error_and_skip.inc
mysql-test/suite/rpl/t/rpl_stm_000001.test:
- The include file extra/rpl_tests/rpl_stm_000001.test was only
sourced once, in suite/rpl/t/rpl_stm_000001.test.
Moved extra/rpl_tests/rpl_stm_000001.test to
suite/rpl/t/rpl_stm_000001.test and removed the old
suite/rpl/t/rpl_stm_000001.test.
mysql-test/suite/rpl/t/rpl_stm_auto_increment_bug33029.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_stm_binlog_direct.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_stm_conflicts.test:
replaced master-slave-end.inc by rpl_end.inc
cosmetic fixes
mysql-test/suite/rpl/t/rpl_stm_create_if_not_exists.test:
use rpl_end instead of master-slave-end.
mysql-test/suite/rpl/t/rpl_stm_flsh_tbls.test:
cosmetic fixes
mysql-test/suite/rpl/t/rpl_stm_insert_delayed.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_stm_loadfile.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_stm_log.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_stm_max_relay_size.test:
cosmetic fixes
mysql-test/suite/rpl/t/rpl_stm_mixing_engines.test:
- replaced master-slave-end.inc by rpl_end.inc
- replaced master-slave-reset.inc by rpl_reset.inc
- diff_tables.inc now takes only one parameter.
mysql-test/suite/rpl/t/rpl_stm_multi_query.test:
cosmetic fixes
mysql-test/suite/rpl/t/rpl_stm_no_op.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_stm_sql_mode.test:
made test clean up replication state
mysql-test/suite/rpl/t/rpl_stm_until.test:
- Made test clean up replication state.
- replaced master-slave-reset.inc by rpl_reset.inc
- the relay log is now called slave-relay-bin.000003 instead of .000004,
because master-slave.inc doesn't rotate it as much as before.
mysql-test/suite/rpl/t/rpl_stop_slave.test:
use rpl_end instead of master-slav-end
mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_temp_table.test:
Made test clean up replication state.
Replaced save_master_pos/connection slave/sync_with_master
by sync_slave_with_master.
mysql-test/suite/rpl/t/rpl_temp_table_mix_row.test:
Made test clean up replication state.
replaced ad-hoc call to 'connect' by include/rpl_connect.inc
replaced master-slave-reset.inc by rpl_reset.inc
mysql-test/suite/rpl/t/rpl_temporary.test:
- Made test clean up replication state.
- This test sources include/delete_anonymous_users.inc on master.
This means it updates the user table in the mysql database manually
on the master. This causes failure in the slave sql thread when
binlog_format=row. Hence, we stop the slave first and source
include/delete_anonymous_users.inc on both master and slave.
mysql-test/suite/rpl/t/rpl_temporary_errors.test:
Made test clean up replication state.
cosmetic fixes
mysql-test/suite/rpl/t/rpl_test_framework.cnf:
new cfg file for new test
mysql-test/suite/rpl/t/rpl_test_framework.test:
new test case that verifies that include/rpl_change_topology.inc
works
mysql-test/suite/rpl/t/rpl_timezone.test:
- Made test clean up replication state.
- stop slave before last sub-test, because that test does not use
the slave connection.
mysql-test/suite/rpl/t/rpl_tmp_table_and_DDL.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_trigger.test:
- Made test clean up replication state.
- replace master-slave-reset.inc by rpl_reset.inc
- use new file rpl_reconnect.inc instead of ad-hoc code
- diff_tables.inc now takes only one parameter.
mysql-test/suite/rpl/t/rpl_trunc_temp.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_truncate_2myisam.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_truncate_3innodb.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_typeconv_innodb.test:
- made test clean up replication state
- removed unnecessary call to master-slave-reset.inc
- diff_tables.inc now takes only one parameter.
mysql-test/suite/rpl/t/rpl_udf.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_user.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_user_variables.test:
Made test clean up replication state.
mysql-test/suite/rpl/t/rpl_variables.test:
- Made test clean up replication state.
- replaced reset_master_and_slave.inc by rpl_reset.inc
- diff_tables.inc now takes only one parameter.
mysql-test/suite/rpl/t/rpl_variables_stm.test:
- Made test clean up replication state.
- diff_tables.inc now takes only one parameter.
mysql-test/suite/rpl/t/rpl_view.test:
Made test clean up replication state.
mysql-test/suite/rpl_ndb/r/rpl_ndb_2other.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_UUID.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_apply_status.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_auto_inc.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_basic.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_blob.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_blob2.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_circular.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_2ch.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_commit_afterflush.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_ctype_ucs2_def.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_dd_basic.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_dd_partitions.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_ddl.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_delete_nowhere.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_do_db.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_do_table.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_extraCol.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_func003.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_idempotent.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_innodb2ndb.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_innodb_trans.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_insert_ignore.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_log.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_mixed_engines_transactions.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_mixed_tables.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_multi.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_multi_update2.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_multi_update3.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_myisam2ndb.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_rep_ignore.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_row_001.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_set_null.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_sp003.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_sp006.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_stm_innodb.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_sync.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_trig004.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_row_basic_7ndb.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_truncate_7ndb.result:
updated result file
mysql-test/suite/rpl_ndb/t/rpl_ndb_2innodb.test:
made test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_2myisam.test:
made test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_2ndb.test:
made test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_2other.test:
made test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_UUID.test:
made test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_apply_status.test:
made test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_auto_inc.test:
made test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_bank.test:
made test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test:
- replaced master-slave-end.inc by rpl_end.inc
- removed wait_for_slave_sql_to_stop since it is followed by
wait_for_slave_sql_error.inc
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob.test:
made test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob2.test:
made test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test:
made test use rpl_init.inc to setup circular replication, instead of ad-hoc setup
made test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_2ch.cnf:
removed automatic configuration of server as slave. this is not
needed because rpl_init.inc does it.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_2ch.test:
- made test clean up replication state
- it seems that sync_slave_with_master does not work deterministically
here, so instead we wait for 'drop table' to replicate by checking
when the table disappears on slave.
- diff_tables.inc now takes only one parameter.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test:
make test clean up replication state
use rpl_change_topology.inc to reconfigure replication topology,
instead of ad-hoc call to change master
mysql-test/suite/rpl_ndb/t/rpl_ndb_commit_afterflush.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_ctype_ucs2_def.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_dd_basic.test:
replace master-slave-end.inc by rpl_end.inc
mysql-test/suite/rpl_ndb/t/rpl_ndb_dd_partitions.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_ddl.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_delete_nowhere.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_db.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_table.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_extraCol.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_func003.test:
replace master-slave-end.inc by rpl_end.inc
mysql-test/suite/rpl_ndb/t/rpl_ndb_idempotent.test:
replace master-slave-end.inc by rpl_end.inc
mysql-test/suite/rpl_ndb/t/rpl_ndb_innodb2ndb.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_innodb_trans.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_insert_ignore.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_load.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_log.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_mixed_engines_transactions.test:
- replace master-slave-end.inc by rpl_end.inc
- diff_tables.inc now takes only one parameter.
mysql-test/suite/rpl_ndb/t/rpl_ndb_mixed_tables.test:
- make test clean up replication state
- diff_tables.inc now takes only one parameter.
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi.test:
- make test clean up replication state
- use rpl_change_topology.inc to change replication topology,
instead of ad-hoc calls to change master
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi_update2.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi_update3.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_myisam2ndb.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_relayrotate.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_rep_ignore.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_row_001.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_set_null.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp003.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp006.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_stm_innodb.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_sync.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndb_trig004.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_ndbapi_multi.test:
make test clean up replication state
mysql-test/suite/rpl_ndb/t/rpl_row_basic_7ndb.test:
replace master-slave-end.inc by rpl_end.inc
mysql-test/suite/rpl_ndb/t/rpl_truncate_7ndb.test:
replace master-slave-end.inc by rpl_end.inc
mysql-test/suite/rpl_ndb/t/rpl_truncate_7ndb_2.test:
make test clean up replication state
mysql-test/suite/sys_vars/t/rpl_init_slave_func.test:
made test clean up after itself
mysql-test/t/init_file.test:
use new file force_restart.inc instead of SP
2010-12-19 18:07:28 +01:00
|
|
|
--source include/rpl_end.inc
|