#  Licensed to the Apache Software Foundation (ASF) under one
#  or more contributor license agreements.  See the NOTICE file
#  distributed with this work for additional information
#  regarding copyright ownership.  The ASF licenses this file
#  to you under the Apache License, Version 2.0 (the
#  "License"); you may not use this file except in compliance
#  with the License.  You may obtain a copy of the License at
#  
#    http://www.apache.org/licenses/LICENSE-2.0
#    
#  Unless required by applicable law or agreed to in writing,
#  software distributed under the License is distributed on an
#  "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
#  KIND, either express or implied.  See the License for the
#  specific language governing permissions and limitations
#  under the License.

# Install a complete distribution, the required system tools and libraries, the
# runtime dependencies and the Tuscany SCA runtime on a fresh Ubuntu Server
# 9.10 system.

# Display commands as they are executed
set -x

# Build and install in the current directory
build=`pwd`

# Install core dev tools
sudo apt-get -y install wget git-core autoconf automake libtool g++
if [ "$?" != "0" ]; then
    exit $?
fi

# Uncomment to install GCC 4.5
#wget http://svn.apache.org/repos/asf/tuscany/sca-cpp/trunk/ubuntu/ubuntu-gcc-4.5
#chmod +x ./ubuntu-gcc-4.5
#./ubuntu-gcc-4.5
#if [ "$?" != "0" ]; then
#    exit $?
#fi

# Build Apache HTTP server
sudo apt-get -y install libssl-dev
if [ "$?" != "0" ]; then
    exit $?
fi
wget http://www.apache.org/dist/httpd/httpd-2.2.16.tar.gz
tar xzf httpd-2.2.16.tar.gz
cd httpd-2.2.16
./configure --enable-ssl --enable-proxy --enable-mods-shared=most --with-included-apr --with-mpm=prefork --prefix=$build/httpd-2.2.16-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Memcached
sudo apt-get -y install libevent-dev
if [ "$?" != "0" ]; then
    exit $?
fi
wget http://memcached.googlecode.com/files/memcached-1.4.4.tar.gz
tar xzf memcached-1.4.4.tar.gz
cd memcached-1.4.4
./configure --prefix=$build/memcached-1.4.4-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Tinycdb
wget http://www.corpit.ru/mjt/tinycdb/tinycdb_0.77.tar.gz
tar xzf tinycdb_0.77.tar.gz
cd tinycdb-0.77
make
make prefix=$build/tinycdb-0.77-bin install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Libcurl
wget http://curl.haxx.se/download/curl-7.19.5.tar.gz
tar xzf curl-7.19.5.tar.gz
cd curl-7.19.5
./configure --prefix=$build/curl-7.19.5-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Libxml2
wget ftp://xmlsoft.org/libxml2/libxml2-sources-2.7.7.tar.gz
tar xzf libxml2-sources-2.7.7.tar.gz
cd libxml2-2.7.7
./configure --prefix=$build/libxml2-2.7.7-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build TraceMonkey
sudo apt-get -y install autoconf2.13 zip
if [ "$?" != "0" ]; then
    exit $?
fi
wget -O tracemonkey-e4364736e170.tar.gz http://hg.mozilla.org/tracemonkey/archive/e4364736e170.tar.gz
tar xzf tracemonkey-e4364736e170.tar.gz
cd tracemonkey-e4364736e170/js/src
autoconf2.13
./configure --prefix=$build/tracemonkey-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Install Google AppEngine SDK
wget http://googleappengine.googlecode.com/files/google_appengine_1.3.2.zip
unzip google_appengine_1.3.2.zip

# Build Apache Axis2/C
sudo apt-get -y install pkg-config
if [ "$?" != "0" ]; then
    exit $?
fi
wget http://www.apache.org/dist/ws/axis2-c/1_6_0/axis2c-src-1.6.0.tar.gz
tar xzf axis2c-src-1.6.0.tar.gz
cd axis2c-src-1.6.0
./configure --enable-libxml2 LIBXML2_CFLAGS="-I$build/libxml2-2.7.7-bin/include/libxml2" LIBXML2_LIBS="-L$build/libxml2-2.7.7-bin/lib -lxml2" --enable-openssl --with-apache2=$build/httpd-2.2.16-bin/include --prefix=$build/axis2c-1.6.0-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
export AXIS2C_HOME=$build/axis2c-1.6.0-bin
cd samples
./configure --prefix=$build/axis2c-1.6.0-bin --with-axis2=$build/axis2c-1.6.0-bin/include/axis2-1.6.0
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Apache Qpid/C++
sudo apt-get -y install libboost-dev libboost-program-options-dev libboost-filesystem-dev uuid-dev
if [ "$?" != "0" ]; then
    exit $?
fi
sudo -s ln -s /usr/lib/libboost_program_options-mt.so /usr/lib/libboost_program_options.so
sudo -s ln -s /usr/lib/libboost_filesystem-mt.so /usr/lib/libboost_filesystem.so
wget http://www.apache.org/dist/qpid/0.6/qpid-cpp-0.6.tar.gz
tar xzf qpid-cpp-0.6.tar.gz
cd qpidc-0.6
./configure --prefix=$build/qpidc-0.6-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Libexpat
wget http://sourceforge.net/projects/expat/files/expat/2.0.1/expat-2.0.1.tar.gz/download
mv download expat-2.0.1.tar.gz
tar xzf expat-2.0.1.tar.gz
cd expat-2.0.1
./configure --prefix=$build/expat-2.0.1-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Libstrophe
git clone git://github.com/jsdelfino/libstrophe.git
cd libstrophe
./bootstrap.sh
./configure --prefix=$build/libstrophe-bin --with-expat=$build/expat-2.0.1-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Install Apache Vysper
sudo apt-get -y install openjdk-6-jdk
if [ "$?" != "0" ]; then
    exit $?
fi
wget http://www.apache.org/dist/mina/vysper/0.5/vysper-0.5-bin.tar.gz
tar xzf vysper-0.5-bin.tar.gz
if [ "$?" != "0" ]; then
    exit $?
fi

# Build HTML Tidy
sudo apt-get -y install cvs
if [ "$?" != "0" ]; then
    exit $?
fi
cvs -z3 -d:pserver:anonymous@tidy.cvs.sourceforge.net:/cvsroot/tidy co -P tidy
cd tidy
sh build/gnuauto/setup.sh
./configure --prefix=$build/htmltidy-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Libopkele
git clone git://github.com/jsdelfino/libopkele.git
cd libopkele
./autogen.bash
./configure --prefix=$build/libopkele-bin --with-curl=$build/curl-7.19.5-bin --with-expat=$build/expat-2.0.1-bin --with-htmltidy=$build/htmltidy-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Mod_auth_openid
sudo apt-get -y install libpcre3-dev
git clone git://github.com/jsdelfino/mod_auth_openid.git
cd mod_auth_openid
./autogen.sh
./configure --prefix=$build/mod-auth-openid-bin --with-apr=$build/httpd-2.2.16-bin --with-httpd=$build/httpd-2.2.16-bin --with-curl=$build/curl-7.19.5-bin --with-libopkele=$build/libopkele-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build PostgreSQL
sudo apt-get -y install libreadline-dev
if [ "$?" != "0" ]; then
    exit $?
fi
wget ftp://ftp9.us.postgresql.org/pub/mirrors/postgresql/source/v9.0beta4/postgresql-9.0beta4.tar.gz
tar xzf postgresql-9.0beta4.tar.gz
cd postgresql-9.0beta4
./configure --prefix=$build/postgresql-9.0-bin
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Apache Thrift
sudo apt-get -y install bison flex python-dev
if [ "$?" != "0" ]; then
    exit $?
fi
wget http://www.apache.org/dist/incubator/thrift/0.2.0-incubating/thrift-0.2.0-incubating.tar.gz
tar xzf thrift-0.2.0-incubating.tar.gz
cd thrift-0.2.0
./bootstrap.sh
./configure --prefix=$build/thrift-0.2.0-bin PY_PREFIX=$build/thrift-0.2.0-bin --with-java=no --with-erlang=no --with-perl=no --with-ruby=no --with-csharp=no --disable-static
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Facebook fb303
cd thrift-0.2.0/contrib/fb303
./bootstrap.sh
./configure --prefix=$build/thrift-0.2.0-bin/contrib/fb303 PY_PREFIX=$build/thrift-0.2.0-bin/contrib/fb303 --with-thriftpath=$build/thrift-0.2.0-bin --disable-static
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cp cpp/lib/libfb303.so $build/thrift-0.2.0-bin/contrib/fb303/lib
cd $build

# Build Facebook Scribe
wget http://github.com/downloads/facebook/scribe/scribe-2.2.tar.gz
tar xzf scribe-2.2.tar.gz
cd scribe
./bootstrap.sh --prefix=$build/scribe-2.2-bin PY_PREFIX=$build/scribe-2.2-bin --with-thriftpath=$build/thrift-0.2.0-bin --with-fb303path=$build/thrift-0.2.0-bin/contrib/fb303 --disable-static
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cp src/lib/libscribe.so $build/scribe-2.2-bin/lib
cd $build

# Build Apache Libcloud
wget http://www.apache.org/dist/incubator/libcloud/apache-libcloud-incubating-0.3.1.tar.bz2
tar xjf apache-libcloud-incubating-0.3.1.tar.bz2
cd apache-libcloud-0.3.1
python setup.py build
python setup.py install --home $build/libcloud-0.3.1-bin
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Build Tuscany SCA
sudo apt-get -y install
if [ "$?" != "0" ]; then
    exit $?
fi
git clone git://git.apache.org/tuscany-sca-cpp.git
cd tuscany-sca-cpp
cp etc/git-exclude .git/info/exclude
./bootstrap
./configure --prefix=$build/tuscany-sca-cpp-bin --with-curl=$build/curl-7.19.5-bin --with-apr=$build/httpd-2.2.16-bin --with-httpd=$build/httpd-2.2.16-bin --with-memcached=$build/memcached-1.4.4-bin --with-tinycdb=$build/tinycdb-0.77-bin --with-js-include=$build/tracemonkey-bin/include/js --with-js-lib=$build/tracemonkey-bin/lib --with-libcloud=$build/libcloud-0.3.1-bin --enable-threads --enable-python --enable-gae --with-gae=$build/google_appengine --enable-java --with-java=/usr/lib/jvm/java-6-openjdk --enable-webservice --with-libxml2=$build/libxml2-2.7.7-bin --with-axis2c=$build/axis2c-1.6.0-bin --enable-queue --with-qpidc=$build/qpidc-0.6-bin --enable-chat --with-libstrophe=$build/libstrophe-bin --with-vysper=$build/vysper-0.5 --enable-sqldb --with-pgsql=$build/postgresql-9.0-bin --enable-log --with-thrift=$build/thrift-0.2.0-bin --with-scribe=$build/scribe-2.2-bin --enable-openid --with-mod-auth-openid=$build/mod-auth-openid-bin --enable-oauth
make
make install
if [ "$?" != "0" ]; then
    exit $?
fi
cd $build

# Create bin archive
tar czf tuscany-sca-cpp-all-1.0.tar.gz tuscany-sca-cpp tuscany-sca-cpp-bin axis2c-1.6.0-bin libxml2-2.7.7-bin curl-7.19.5-bin httpd-2.2.16-bin tracemonkey-bin google_appengine libstrophe-bin memcached-1.4.4-bin tinycdb-0.77-bin qpidc-0.6-bin vysper-0.5 postgresql-9.0-bin thrift-0.2.0-bin scribe-2.2-bin libcloud-0.3.1-bin htmltidy-bin libopkele-bin mod-auth-openid-bin