diff options
Diffstat (limited to '')
3 files changed, 0 insertions, 515 deletions
diff --git a/tags/cpp-0.1.incubating-M1-RC3b/sca/samples/ides/devstudio6/projects/Calculator/WSClient/BuildInstructions.txt b/tags/cpp-0.1.incubating-M1-RC3b/sca/samples/ides/devstudio6/projects/Calculator/WSClient/BuildInstructions.txt deleted file mode 100644 index 3716551f14..0000000000 --- a/tags/cpp-0.1.incubating-M1-RC3b/sca/samples/ides/devstudio6/projects/Calculator/WSClient/BuildInstructions.txt +++ /dev/null @@ -1,95 +0,0 @@ - -These sample projects will build: - -A basic calculator SCA service. -A client to test that service. -A WSClient to test the service as exposed by AXIS2C as a web service. - -The sample depdends on the current versions of Tuscany SDO and Tuscany SCA, which in turn -depend on axis2c version 0.92, and libxml2. See the SCA and SDO project installation -details. - -The sample already has the pre-generated proxy and wrapper code in it, but should -you need to regenerate these, you will need the command line tool "scagen" which is -part of the Tuscany SCA project. - -The projects expect to following environment variables to be set: -TUSCANY_SCACPP: -The directory in which the sca runtime is deployed - probably something ending in sca/deploy. - -TUSCANY_SDOCPP: -The directory where the sdo runtime is deployed - probably something ending in sdo/deploy. - -TUSCANY_SCACPP_DEFAULT_MODULE: -This is the default module to be loaded by SCA. It consists of <subsystem>/<component>. -In the case of this sample - its set programatically by the client - thats easier when -using visual studio. - -TUSCANY_SCACPP_SYSTEM_ROOT -This is the point from which SCA will start looking for modules to load. Again this is -set programmatically by the sample. - -AXIS2C_HOME: -This is where axis2c is deployed- this is only required by the WSClient project. - -The Calculator project contains a simple calculator service, and the descriptive files -which help the runtime to find the service. - - -Rebuilding the proxy and wrapper classes -======================================== - -If required, go to the Calculator sample main directory, and -type: -"scagen -dir CalculatorModule -output CalculatorModule" - -The generated code is put into the CalculatorModule subdirectory. - -Building the Client project -=========================== - -Set the active project to be "Client", and then build all. -This will re-build Calculator, then rebuild the Client, -The final step of the build will call a batch file "deploy.cmd", -which copies all the required files to the directory samples/Calculator/deploy - -Use Project..Settings..Debug and check the path to the executable, check also the -path to the working directory. Alter these to match your configuration. - -Run the project, and your SCA service should be called. - -Building the WSClient project -============================= - -Modify the services.xml file, and make the SCA system root defined -within it comply with your SCA system root. - -Set the active project to WSClient and build all. - -The last step of the build will run a wsdeploy script, which -tries to use the environment variable AXIS2C_HOME, to create -a services/Calculator directory, and deploy the services.xml file. -The dll which resolves SCA services is called -tuscany_sca_ws_service.dll - this will be copied to the axis -tree by the same script file. - -To run the axis2 http server, go to the %AXIS2C_HOME%/bin -directory, and launch the executable. - -Now verify that the path to the WSClient executable makes sense -in your project settings, and run the project. - - -Note -==== - -It can be quite hard to debug services which are invoked through axis, as the -dll including the service is loaded on call. One useful technique is to -load the axis http server in visual studio (create an empty project and make -the executable path point to axis2_http_server.exe). -Now use the Project..Settings..Debug..Addition DLLs option and add -services/Calculator/tuscany_sca_ws_service.dll. -You will now be able to set breakpoints in the dll (Axis2EntryPointService_invoke -is a good place - in Axis2EntryPointService_skeleton.cpp). -Run your WSclient from another debugger, and the server debugger will break -on the service code. diff --git a/tags/cpp-0.1.incubating-M1-RC3b/sca/samples/ides/devstudio6/projects/Calculator/WSClient/WSClient.dsp b/tags/cpp-0.1.incubating-M1-RC3b/sca/samples/ides/devstudio6/projects/Calculator/WSClient/WSClient.dsp deleted file mode 100644 index 5b3739598a..0000000000 --- a/tags/cpp-0.1.incubating-M1-RC3b/sca/samples/ides/devstudio6/projects/Calculator/WSClient/WSClient.dsp +++ /dev/null @@ -1,122 +0,0 @@ -# Microsoft Developer Studio Project File - Name="WSClient" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Console Application" 0x0103
-
-CFG=WSClient - Win32 Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE
-!MESSAGE NMAKE /f "WSClient.mak".
-!MESSAGE
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE
-!MESSAGE NMAKE /f "WSClient.mak" CFG="WSClient - Win32 Debug"
-!MESSAGE
-!MESSAGE Possible choices for configuration are:
-!MESSAGE
-!MESSAGE "WSClient - Win32 Release" (based on "Win32 (x86) Console Application")
-!MESSAGE "WSClient - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF "$(CFG)" == "WSClient - Win32 Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
-# ADD CPP /nologo /W3 /GX /O2 /I "$(TUSCANY_SDOCPP)/include" /I "$(AXIS2C_HOME)/include" /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /FD /c
-# SUBTRACT CPP /YX
-# ADD BASE RSC /l 0x809 /d "NDEBUG"
-# ADD RSC /l 0x809 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib tuscany_sca.lib tuscany_sdo.lib axis2_engine.lib axis2_parser.lib axis2_util.lib axiom.lib /nologo /subsystem:console /machine:I386 /libpath:"$(TUSCANY_SCACPP)\lib" /libpath:"$(TUSCANY_SDOCPP)\lib" /libpath:"$(AXIS2C_HOME)\lib"
-# Begin Special Build Tool
-SOURCE="$(InputPath)"
-PostBuild_Cmds=..\wsdeploy.cmd Release
-# End Special Build Tool
-
-!ELSEIF "$(CFG)" == "WSClient - Win32 Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /GZ /c
-# ADD CPP /nologo /W3 /Gm /GX /ZI /Od /I "$(TUSCANY_SDOCPP)/include" /I "$(AXIS2C_HOME)/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /FD /GZ /c
-# SUBTRACT CPP /YX
-# ADD BASE RSC /l 0x809 /d "_DEBUG"
-# ADD RSC /l 0x809 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib tuscany_sca.lib tuscany_sdo.lib axis2_engine.lib axis2_parser.lib axis2_util.lib axiom.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept /libpath:"$(TUSCANY_SCACPP)\lib" /libpath:"$(TUSCANY_SDOCPP)\lib" /libpath:"$(AXIS2C_HOME)\lib"
-# Begin Special Build Tool
-SOURCE="$(InputPath)"
-PostBuild_Cmds=..\wsdeploy.cmd Debug
-# End Special Build Tool
-
-!ENDIF
-
-# Begin Target
-
-# Name "WSClient - Win32 Release"
-# Name "WSClient - Win32 Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE=..\..\..\..\..\Calculator\WSClient\axis2_Calculator_stub.cpp
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\..\..\..\Calculator\WSClient\axis2_Calculator_stub.h
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\..\..\..\Calculator\WSClient\Calculator_Client.cpp
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# End Group
-# Begin Source File
-
-SOURCE=.\BuildInstructions.txt
-# End Source File
-# End Target
-# End Project
diff --git a/tags/cpp-0.1.incubating-M1-RC3b/sca/samples/ides/devstudio6/projects/Calculator/WSClient/WSClient.mak b/tags/cpp-0.1.incubating-M1-RC3b/sca/samples/ides/devstudio6/projects/Calculator/WSClient/WSClient.mak deleted file mode 100644 index 4ce51c68bb..0000000000 --- a/tags/cpp-0.1.incubating-M1-RC3b/sca/samples/ides/devstudio6/projects/Calculator/WSClient/WSClient.mak +++ /dev/null @@ -1,298 +0,0 @@ -# Microsoft Developer Studio Generated NMAKE File, Based on WSClient.dsp
-!IF "$(CFG)" == ""
-CFG=WSClient - Win32 Debug
-!MESSAGE No configuration specified. Defaulting to WSClient - Win32 Debug.
-!ENDIF
-
-!IF "$(CFG)" != "WSClient - Win32 Release" && "$(CFG)" != "WSClient - Win32 Debug"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE
-!MESSAGE NMAKE /f "WSClient.mak" CFG="WSClient - Win32 Debug"
-!MESSAGE
-!MESSAGE Possible choices for configuration are:
-!MESSAGE
-!MESSAGE "WSClient - Win32 Release" (based on "Win32 (x86) Console Application")
-!MESSAGE "WSClient - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE
-!ERROR An invalid configuration is specified.
-!ENDIF
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE
-NULL=nul
-!ENDIF
-
-!IF "$(CFG)" == "WSClient - Win32 Release"
-
-OUTDIR=.\Release
-INTDIR=.\Release
-# Begin Custom Macros
-OutDir=.\Release
-# End Custom Macros
-
-!IF "$(RECURSE)" == "0"
-
-ALL : "$(OUTDIR)\WSClient.exe"
-
-!ELSE
-
-ALL : "Client - Win32 Release" "Calculator - Win32 Release" "$(OUTDIR)\WSClient.exe"
-
-!ENDIF
-
-!IF "$(RECURSE)" == "1"
-CLEAN :"Calculator - Win32 ReleaseCLEAN" "Client - Win32 ReleaseCLEAN"
-!ELSE
-CLEAN :
-!ENDIF
- -@erase "$(INTDIR)\axis2_Calculator_stub.obj"
- -@erase "$(INTDIR)\Calculator_Client.obj"
- -@erase "$(INTDIR)\vc60.idb"
- -@erase "$(OUTDIR)\WSClient.exe"
-
-"$(OUTDIR)" :
- if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP=cl.exe
-CPP_PROJ=/nologo /ML /W3 /GX /O2 /I "$(TUSCANY_SDOCPP)/include" /I "$(AXIS2C_HOME)/include" /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c
-
-.c{$(INTDIR)}.obj::
- $(CPP) @<<
- $(CPP_PROJ) $<
-<<
-
-.cpp{$(INTDIR)}.obj::
- $(CPP) @<<
- $(CPP_PROJ) $<
-<<
-
-.cxx{$(INTDIR)}.obj::
- $(CPP) @<<
- $(CPP_PROJ) $<
-<<
-
-.c{$(INTDIR)}.sbr::
- $(CPP) @<<
- $(CPP_PROJ) $<
-<<
-
-.cpp{$(INTDIR)}.sbr::
- $(CPP) @<<
- $(CPP_PROJ) $<
-<<
-
-.cxx{$(INTDIR)}.sbr::
- $(CPP) @<<
- $(CPP_PROJ) $<
-<<
-
-RSC=rc.exe
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\WSClient.bsc"
-BSC32_SBRS= \
-
-LINK32=link.exe
-LINK32_FLAGS=kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib tuscany_sca.lib tuscany_sdo.lib axis2_engine.lib axis2_parser.lib axis2_util.lib axiom.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\WSClient.pdb" /machine:I386 /out:"$(OUTDIR)\WSClient.exe" /libpath:"$(TUSCANY_SCACPP)\lib" /libpath:"$(TUSCANY_SDOCPP)\lib" /libpath:"$(AXIS2C_HOME)\lib"
-LINK32_OBJS= \
- "$(INTDIR)\axis2_Calculator_stub.obj" \
- "$(INTDIR)\Calculator_Client.obj" \
- "..\Calculator\Release\Calculator.lib"
-
-"$(OUTDIR)\WSClient.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
- $(LINK32) @<<
- $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-
-SOURCE="$(InputPath)"
-DS_POSTBUILD_DEP=$(INTDIR)\postbld.dep
-
-ALL : $(DS_POSTBUILD_DEP)
-
-# Begin Custom Macros
-OutDir=.\Release
-# End Custom Macros
-
-$(DS_POSTBUILD_DEP) : "Client - Win32 Release" "Calculator - Win32 Release" "$(OUTDIR)\WSClient.exe"
- ..\wsdeploy.cmd Release
- echo Helper for Post-build step > "$(DS_POSTBUILD_DEP)"
-
-!ELSEIF "$(CFG)" == "WSClient - Win32 Debug"
-
-OUTDIR=.\Debug
-INTDIR=.\Debug
-# Begin Custom Macros
-OutDir=.\Debug
-# End Custom Macros
-
-!IF "$(RECURSE)" == "0"
-
-ALL : "$(OUTDIR)\WSClient.exe"
-
-!ELSE
-
-ALL : "Client - Win32 Debug" "Calculator - Win32 Debug" "$(OUTDIR)\WSClient.exe"
-
-!ENDIF
-
-!IF "$(RECURSE)" == "1"
-CLEAN :"Calculator - Win32 DebugCLEAN" "Client - Win32 DebugCLEAN"
-!ELSE
-CLEAN :
-!ENDIF
- -@erase "$(INTDIR)\axis2_Calculator_stub.obj"
- -@erase "$(INTDIR)\Calculator_Client.obj"
- -@erase "$(INTDIR)\vc60.idb"
- -@erase "$(INTDIR)\vc60.pdb"
- -@erase "$(OUTDIR)\WSClient.exe"
- -@erase "$(OUTDIR)\WSClient.ilk"
- -@erase "$(OUTDIR)\WSClient.pdb"
-
-"$(OUTDIR)" :
- if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-CPP=cl.exe
-CPP_PROJ=/nologo /MLd /W3 /Gm /GX /ZI /Od /I "$(TUSCANY_SDOCPP)/include" /I "$(AXIS2C_HOME)/include" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /GZ /c
-
-.c{$(INTDIR)}.obj::
- $(CPP) @<<
- $(CPP_PROJ) $<
-<<
-
-.cpp{$(INTDIR)}.obj::
- $(CPP) @<<
- $(CPP_PROJ) $<
-<<
-
-.cxx{$(INTDIR)}.obj::
- $(CPP) @<<
- $(CPP_PROJ) $<
-<<
-
-.c{$(INTDIR)}.sbr::
- $(CPP) @<<
- $(CPP_PROJ) $<
-<<
-
-.cpp{$(INTDIR)}.sbr::
- $(CPP) @<<
- $(CPP_PROJ) $<
-<<
-
-.cxx{$(INTDIR)}.sbr::
- $(CPP) @<<
- $(CPP_PROJ) $<
-<<
-
-RSC=rc.exe
-BSC32=bscmake.exe
-BSC32_FLAGS=/nologo /o"$(OUTDIR)\WSClient.bsc"
-BSC32_SBRS= \
-
-LINK32=link.exe
-LINK32_FLAGS=kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib tuscany_sca.lib tuscany_sdo.lib axis2_engine.lib axis2_parser.lib axis2_util.lib axiom.lib /nologo /subsystem:console /incremental:yes /pdb:"$(OUTDIR)\WSClient.pdb" /debug /machine:I386 /out:"$(OUTDIR)\WSClient.exe" /pdbtype:sept /libpath:"$(TUSCANY_SCACPP)\lib" /libpath:"$(TUSCANY_SDOCPP)\lib" /libpath:"$(AXIS2C_HOME)\lib"
-LINK32_OBJS= \
- "$(INTDIR)\axis2_Calculator_stub.obj" \
- "$(INTDIR)\Calculator_Client.obj" \
- "..\Calculator\Debug\Calculator.lib"
-
-"$(OUTDIR)\WSClient.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
- $(LINK32) @<<
- $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-
-SOURCE="$(InputPath)"
-DS_POSTBUILD_DEP=$(INTDIR)\postbld.dep
-
-ALL : $(DS_POSTBUILD_DEP)
-
-# Begin Custom Macros
-OutDir=.\Debug
-# End Custom Macros
-
-$(DS_POSTBUILD_DEP) : "Client - Win32 Debug" "Calculator - Win32 Debug" "$(OUTDIR)\WSClient.exe"
- ..\wsdeploy.cmd Debug
- echo Helper for Post-build step > "$(DS_POSTBUILD_DEP)"
-
-!ENDIF
-
-
-!IF "$(NO_EXTERNAL_DEPS)" != "1"
-!IF EXISTS("WSClient.dep")
-!INCLUDE "WSClient.dep"
-!ELSE
-!MESSAGE Warning: cannot find "WSClient.dep"
-!ENDIF
-!ENDIF
-
-
-!IF "$(CFG)" == "WSClient - Win32 Release" || "$(CFG)" == "WSClient - Win32 Debug"
-SOURCE=..\..\..\..\..\Calculator\WSClient\axis2_Calculator_stub.cpp
-
-"$(INTDIR)\axis2_Calculator_stub.obj" : $(SOURCE) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-SOURCE=..\..\..\..\..\Calculator\WSClient\Calculator_Client.cpp
-
-"$(INTDIR)\Calculator_Client.obj" : $(SOURCE) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-!IF "$(CFG)" == "WSClient - Win32 Release"
-
-"Calculator - Win32 Release" :
- cd "..\Calculator"
- $(MAKE) /$(MAKEFLAGS) /F .\Calculator.mak CFG="Calculator - Win32 Release"
- cd "..\WSClient"
-
-"Calculator - Win32 ReleaseCLEAN" :
- cd "..\Calculator"
- $(MAKE) /$(MAKEFLAGS) /F .\Calculator.mak CFG="Calculator - Win32 Release" RECURSE=1 CLEAN
- cd "..\WSClient"
-
-!ELSEIF "$(CFG)" == "WSClient - Win32 Debug"
-
-"Calculator - Win32 Debug" :
- cd "..\Calculator"
- $(MAKE) /$(MAKEFLAGS) /F .\Calculator.mak CFG="Calculator - Win32 Debug"
- cd "..\WSClient"
-
-"Calculator - Win32 DebugCLEAN" :
- cd "..\Calculator"
- $(MAKE) /$(MAKEFLAGS) /F .\Calculator.mak CFG="Calculator - Win32 Debug" RECURSE=1 CLEAN
- cd "..\WSClient"
-
-!ENDIF
-
-!IF "$(CFG)" == "WSClient - Win32 Release"
-
-"Client - Win32 Release" :
- cd "..\Client"
- $(MAKE) /$(MAKEFLAGS) /F .\Client.mak CFG="Client - Win32 Release"
- cd "..\WSClient"
-
-"Client - Win32 ReleaseCLEAN" :
- cd "..\Client"
- $(MAKE) /$(MAKEFLAGS) /F .\Client.mak CFG="Client - Win32 Release" RECURSE=1 CLEAN
- cd "..\WSClient"
-
-!ELSEIF "$(CFG)" == "WSClient - Win32 Debug"
-
-"Client - Win32 Debug" :
- cd "..\Client"
- $(MAKE) /$(MAKEFLAGS) /F .\Client.mak CFG="Client - Win32 Debug"
- cd "..\WSClient"
-
-"Client - Win32 DebugCLEAN" :
- cd "..\Client"
- $(MAKE) /$(MAKEFLAGS) /F .\Client.mak CFG="Client - Win32 Debug" RECURSE=1 CLEAN
- cd "..\WSClient"
-
-!ENDIF
-
-
-!ENDIF
-
|