diff options
Diffstat (limited to 'sandbox/sebastien/cpp/apr-2/ubuntu/ubuntu-install-all')
-rwxr-xr-x | sandbox/sebastien/cpp/apr-2/ubuntu/ubuntu-install-all | 340 |
1 files changed, 340 insertions, 0 deletions
diff --git a/sandbox/sebastien/cpp/apr-2/ubuntu/ubuntu-install-all b/sandbox/sebastien/cpp/apr-2/ubuntu/ubuntu-install-all new file mode 100755 index 0000000000..c91b683ca1 --- /dev/null +++ b/sandbox/sebastien/cpp/apr-2/ubuntu/ubuntu-install-all @@ -0,0 +1,340 @@ +# Licensed to the Apache Software Foundation (ASF) under one +# or more contributor license agreements. See the NOTICE file +# distributed with this work for additional information +# regarding copyright ownership. The ASF licenses this file +# to you under the Apache License, Version 2.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +# KIND, either express or implied. See the License for the +# specific language governing permissions and limitations +# under the License. + +# Install a complete distribution, the required system tools and libraries, the +# runtime dependencies and the Tuscany SCA runtime on a fresh Ubuntu Server +# 10.10 64-bit system. + +# Display commands as they are executed +set -x + +# Build and install in the current directory +build=`pwd` + +# Install core dev tools +sudo apt-get -y install wget git-core autoconf automake libtool g++ +if [ "$?" != "0" ]; then + exit $? +fi + +# Build Libexpat +wget http://sourceforge.net/projects/expat/files/expat/2.0.1/expat-2.0.1.tar.gz/download +mv download expat-2.0.1.tar.gz +tar xzf expat-2.0.1.tar.gz +cd expat-2.0.1 +./configure --prefix=$build/expat-2.0.1-bin +make +make install +if [ "$?" != "0" ]; then + exit $? +fi +cd $build + +# Build Apache HTTP server +sudo apt-get -y install libssl-dev libpcre3-dev +if [ "$?" != "0" ]; then + exit $? +fi +wget http://archive.apache.org/dist/httpd/httpd-2.3.8.tar.gz +tar xzf httpd-2.3.8.tar.gz +wget http://archive.apache.org/dist/httpd/httpd-2.3.8-deps.tar.gz +tar xzf httpd-2.3.8-deps.tar.gz +cd httpd-2.3.8 +./configure --enable-ssl --enable-proxy --enable-usertrack --enable-mods-shared=most --enable-mpms-shared="prefork worker event" --with-included-apr --with-expat=$build/expat-2.0.1-bin --with-mpm=prefork --prefix=$build/httpd-2.3.8-bin +make +make install +if [ "$?" != "0" ]; then + exit $? +fi +cd $build + +# Build Memcached +sudo apt-get -y install libevent-dev +if [ "$?" != "0" ]; then + exit $? +fi +wget http://memcached.googlecode.com/files/memcached-1.4.5.tar.gz +tar xzf memcached-1.4.5.tar.gz +cd memcached-1.4.5 +./configure --prefix=$build/memcached-1.4.5-bin +make +make install +if [ "$?" != "0" ]; then + exit $? +fi +cd $build + +# Build Tinycdb +wget http://www.corpit.ru/mjt/tinycdb/tinycdb_0.77.tar.gz +tar xzf tinycdb_0.77.tar.gz +cd tinycdb-0.77 +make all shared +make prefix=$build/tinycdb-0.77-bin install-all install-sharedlib +if [ "$?" != "0" ]; then + exit $? +fi +cd $build + +# Build Libcurl +wget http://curl.haxx.se/download/curl-7.19.5.tar.gz +tar xzf curl-7.19.5.tar.gz +cd curl-7.19.5 +./configure --prefix=$build/curl-7.19.5-bin +make +make install +if [ "$?" != "0" ]; then + exit $? +fi +cd $build + +# Build Libxml2 +wget ftp://xmlsoft.org/libxml2/libxml2-sources-2.7.7.tar.gz +tar xzf libxml2-sources-2.7.7.tar.gz +cd libxml2-2.7.7 +./configure --prefix=$build/libxml2-2.7.7-bin +make +make install +if [ "$?" != "0" ]; then + exit $? +fi +cd $build + +# Build TraceMonkey +sudo apt-get -y install autoconf2.13 zip +if [ "$?" != "0" ]; then + exit $? +fi +wget -O tracemonkey-e4364736e170.tar.gz http://hg.mozilla.org/tracemonkey/archive/e4364736e170.tar.gz +tar xzf tracemonkey-e4364736e170.tar.gz +cd tracemonkey-e4364736e170/js/src +autoconf2.13 +./configure --prefix=$build/tracemonkey-bin +make +make install +if [ "$?" != "0" ]; then + exit $? +fi +cd $build + +# Install Google AppEngine SDK +wget http://googleappengine.googlecode.com/files/google_appengine_1.4.0.zip +unzip google_appengine_1.4.0.zip + +# Build Apache Axis2/C +sudo apt-get -y install pkg-config +if [ "$?" != "0" ]; then + exit $? +fi +wget http://www.apache.org/dist/ws/axis2-c/1_6_0/axis2c-src-1.6.0.tar.gz +tar xzf axis2c-src-1.6.0.tar.gz +cd axis2c-src-1.6.0 +./configure --enable-libxml2 LIBXML2_CFLAGS="-I$build/libxml2-2.7.7-bin/include/libxml2" LIBXML2_LIBS="-L$build/libxml2-2.7.7-bin/lib -lxml2" --enable-openssl --with-apache2=$build/httpd-2.3.8-bin/include --prefix=$build/axis2c-1.6.0-bin +make +make install +if [ "$?" != "0" ]; then + exit $? +fi +export AXIS2C_HOME=$build/axis2c-1.6.0-bin +cd samples +./configure --prefix=$build/axis2c-1.6.0-bin --with-axis2=$build/axis2c-1.6.0-bin/include/axis2-1.6.0 +make +make install +if [ "$?" != "0" ]; then + exit $? +fi +cd $build + +# Build Apache Qpid/C++ +sudo apt-get -y install libboost-dev libboost-program-options-dev libboost-filesystem-dev uuid-dev +if [ "$?" != "0" ]; then + exit $? +fi +wget http://www.apache.org/dist/qpid/0.6/qpid-cpp-0.6.tar.gz +tar xzf qpid-cpp-0.6.tar.gz +cd qpidc-0.6 +./configure --prefix=$build/qpidc-0.6-bin +make +make install +if [ "$?" != "0" ]; then + exit $? +fi +cd $build + +# Build Libstrophe +git clone git://github.com/jsdelfino/libstrophe.git +cd libstrophe +./bootstrap.sh +./configure --prefix=$build/libstrophe-bin --with-expat=$build/expat-2.0.1-bin +make +make install +if [ "$?" != "0" ]; then + exit $? +fi +cd $build + +# Install Apache Vysper +sudo apt-get -y install openjdk-6-jdk +if [ "$?" != "0" ]; then + exit $? +fi +wget http://www.apache.org/dist/mina/vysper/0.5/vysper-0.5-bin.tar.gz +tar xzf vysper-0.5-bin.tar.gz +if [ "$?" != "0" ]; then + exit $? +fi + +# Build HTML Tidy +sudo apt-get -y install cvs +if [ "$?" != "0" ]; then + exit $? +fi +cvs -z3 -d:pserver:anonymous@tidy.cvs.sourceforge.net:/cvsroot/tidy co -P tidy +cd tidy +sh build/gnuauto/setup.sh +./configure --prefix=$build/htmltidy-bin +make +make install +if [ "$?" != "0" ]; then + exit $? +fi +cd $build + +# Build Libopkele +git clone git://github.com/jsdelfino/libopkele.git +cd libopkele +./autogen.bash +./configure --prefix=$build/libopkele-bin --with-curl=$build/curl-7.19.5-bin --with-expat=$build/expat-2.0.1-bin --with-htmltidy=$build/htmltidy-bin +make +make install +if [ "$?" != "0" ]; then + exit $? +fi +cd $build + +# Build Mod_auth_openid +git clone git://github.com/jsdelfino/mod_auth_openid.git +cd mod_auth_openid +./autogen.sh +./configure --prefix=$build/mod-auth-openid-bin --with-apr=$build/httpd-2.3.8-bin --with-httpd=$build/httpd-2.3.8-bin --with-curl=$build/curl-7.19.5-bin --with-libopkele=$build/libopkele-bin +make +make install +if [ "$?" != "0" ]; then + exit $? +fi +cd $build + +# Build Liboauth +wget http://liboauth.sourceforge.net/pool/liboauth-0.9.1.tar.gz +tar xzf liboauth-0.9.1.tar.gz +cd liboauth-0.9.1 +./configure --prefix=$build/liboauth-0.9.1-bin CURL_CFLAGS="-I$build/curl-7.19.5-bin/include" CURL_LIBS="-L$build/curl-7.19.5-bin/lib -R$build/curl-7.19.5-bin/lib -lcurl" +make +make install +if [ "$?" != "0" ]; then + exit $? +fi +cd $build + +# Build PostgreSQL +sudo apt-get -y install libreadline-dev +if [ "$?" != "0" ]; then + exit $? +fi +wget ftp://ftp9.us.postgresql.org/pub/mirrors/postgresql/source/v9.0.1/postgresql-9.0.1.tar.gz +tar xzf postgresql-9.0.1.tar.gz +cd postgresql-9.0.1 +./configure --prefix=$build/postgresql-9.0.1-bin +make +make install +if [ "$?" != "0" ]; then + exit $? +fi +cd $build + +# Build Apache Thrift +sudo apt-get -y install bison flex python-dev +if [ "$?" != "0" ]; then + exit $? +fi +wget http://www.apache.org/dist/incubator/thrift/0.2.0-incubating/thrift-0.2.0-incubating.tar.gz +tar xzf thrift-0.2.0-incubating.tar.gz +cd thrift-0.2.0 +./bootstrap.sh +./configure --prefix=$build/thrift-0.2.0-bin PY_PREFIX=$build/thrift-0.2.0-bin --with-java=no --with-erlang=no --with-perl=no --with-ruby=no --with-csharp=no --disable-static +make +make install +if [ "$?" != "0" ]; then + exit $? +fi +cd $build + +# Build Facebook fb303 +cd thrift-0.2.0/contrib/fb303 +./bootstrap.sh +./configure --prefix=$build/thrift-0.2.0-bin/contrib/fb303 PY_PREFIX=$build/thrift-0.2.0-bin/contrib/fb303 --with-thriftpath=$build/thrift-0.2.0-bin --disable-static +make +make install +if [ "$?" != "0" ]; then + exit $? +fi +cp cpp/lib/libfb303.so $build/thrift-0.2.0-bin/contrib/fb303/lib +cd $build + +# Build Facebook Scribe +sudo apt-get -y install gawk +if [ "$?" != "0" ]; then + exit $? +fi +wget http://github.com/downloads/facebook/scribe/scribe-2.2.tar.gz +tar xzf scribe-2.2.tar.gz +cd scribe +./bootstrap.sh --prefix=$build/scribe-2.2-bin PY_PREFIX=$build/scribe-2.2-bin --with-thriftpath=$build/thrift-0.2.0-bin --with-fb303path=$build/thrift-0.2.0-bin/contrib/fb303 --disable-static +make +make install +if [ "$?" != "0" ]; then + exit $? +fi +cp src/lib/libscribe.so $build/scribe-2.2-bin/lib +cd $build + +# Build Apache Libcloud +wget http://www.apache.org/dist/incubator/libcloud/apache-libcloud-incubating-0.3.1.tar.bz2 +tar xjf apache-libcloud-incubating-0.3.1.tar.bz2 +cd apache-libcloud-0.3.1 +python setup.py build +python setup.py install --home $build/libcloud-0.3.1-bin +if [ "$?" != "0" ]; then + exit $? +fi +cd $build + +# Build Tuscany SCA +git clone git://git.apache.org/tuscany-sca-cpp.git +cd tuscany-sca-cpp +cp etc/git-exclude .git/info/exclude +./bootstrap +./configure --prefix=$build/tuscany-sca-cpp-bin --with-curl=$build/curl-7.19.5-bin --with-apr=$build/httpd-2.3.8-bin --with-httpd=$build/httpd-2.3.8-bin --with-memcached=$build/memcached-1.4.5-bin --with-tinycdb=$build/tinycdb-0.77-bin --with-js-include=$build/tracemonkey-bin/include/js --with-js-lib=$build/tracemonkey-bin/lib --with-libcloud=$build/libcloud-0.3.1-bin --enable-threads --enable-python --enable-gae --with-gae=$build/google_appengine --enable-java --with-java=/usr/lib/jvm/java-6-openjdk --enable-webservice --with-libxml2=$build/libxml2-2.7.7-bin --with-axis2c=$build/axis2c-1.6.0-bin --enable-queue --with-qpidc=$build/qpidc-0.6-bin --enable-chat --with-libstrophe=$build/libstrophe-bin --with-vysper=$build/vysper-0.5 --enable-sqldb --with-pgsql=$build/postgresql-9.0.1-bin --enable-log --with-thrift=$build/thrift-0.2.0-bin --with-scribe=$build/scribe-2.2-bin --enable-openid --with-mod-auth-openid=$build/mod-auth-openid-bin --enable-oauth --with-liboauth=$build/liboauth-0.9.1-bin +make +make install +if [ "$?" != "0" ]; then + exit $? +fi +cd $build + +# Create bin archive +tar czf tuscany-sca-cpp-all-1.0.tar.gz tuscany-sca-cpp tuscany-sca-cpp-bin axis2c-1.6.0-bin libxml2-2.7.7-bin curl-7.19.5-bin httpd-2.3.8-bin tracemonkey-bin google_appengine libstrophe-bin memcached-1.4.5-bin tinycdb-0.77-bin qpidc-0.6-bin vysper-0.5 postgresql-9.0.1-bin thrift-0.2.0-bin scribe-2.2-bin libcloud-0.3.1-bin htmltidy-bin libopkele-bin mod-auth-openid-bin liboauth-0.9.1-bin + |