diff options
Diffstat (limited to 'java/sca/contrib/demos/load-balancing-webapp/src/test/resources')
6 files changed, 0 insertions, 1245 deletions
diff --git a/java/sca/contrib/demos/load-balancing-webapp/src/test/resources/apache-80/conf/httpd.conf b/java/sca/contrib/demos/load-balancing-webapp/src/test/resources/apache-80/conf/httpd.conf deleted file mode 100644 index 37cf284d35..0000000000 --- a/java/sca/contrib/demos/load-balancing-webapp/src/test/resources/apache-80/conf/httpd.conf +++ /dev/null @@ -1,28 +0,0 @@ -# Load mod_jk module
-# Update this path to match your modules location
-LoadModule jk_module modules/mod_jk.so
-
-# Declare the module for <IfModule directive> (remove this line on Apache 2.x)
-# AddModule mod_jk.c
-# Where to find workers.properties
-# Update this path to match your conf directory location (put workers.properties next to httpd.conf)
-JkWorkersFile conf/workers.properties
-
-# Where to put jk shared memory
-# Update this path to match your local state directory or logs directory
-JkShmFile logs/mod_jk.shm
-
-# Where to put jk logs
-# Update this path to match your logs directory location (put mod_jk.log next to access_log)
-JkLogFile logs/mod_jk.log
-
-# Set the jk log level [debug/error/info]
-JkLogLevel info
-
-# Select the timestamp log format
-JkLogStampFormat "[%a %b %d %H:%M:%S %Y] "
-
-# Send everything for context /examples to worker named worker1 (ajp13)
-# JkMount /examples/* worker1
-# Send everything for context /* to the router
-JkMount /* router
diff --git a/java/sca/contrib/demos/load-balancing-webapp/src/test/resources/apache-80/conf/workers.properties b/java/sca/contrib/demos/load-balancing-webapp/src/test/resources/apache-80/conf/workers.properties deleted file mode 100644 index 9228c4fd8e..0000000000 --- a/java/sca/contrib/demos/load-balancing-webapp/src/test/resources/apache-80/conf/workers.properties +++ /dev/null @@ -1,18 +0,0 @@ - # Load balancer looks after the workers - worker.list=router - - # The load balacer - worker.router.type=lb - worker.router.balance_workers=worker1,worker2 - - # Set properties for worker1 (ajp13) - worker.worker1.type=ajp13 - worker.worker1.host=localhost - worker.worker1.port=8010 - worker.worker1.lbfactor=1 - - # Set properties for worker1 (ajp13) - worker.worker2.type=ajp13 - worker.worker2.host=localhost - worker.worker2.port=8011 - worker.worker2.lbfactor=1 diff --git a/java/sca/contrib/demos/load-balancing-webapp/src/test/resources/tomcat-8085/conf/server.xml b/java/sca/contrib/demos/load-balancing-webapp/src/test/resources/tomcat-8085/conf/server.xml deleted file mode 100644 index 920fa7b037..0000000000 --- a/java/sca/contrib/demos/load-balancing-webapp/src/test/resources/tomcat-8085/conf/server.xml +++ /dev/null @@ -1,391 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!-- - Licensed to the Apache Software Foundation (ASF) under one or more - contributor license agreements. See the NOTICE file distributed with - this work for additional information regarding copyright ownership. - The ASF licenses this file to You under the Apache License, Version 2.0 - (the "License"); you may not use this file except in compliance with - the License. You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. ---> -<!-- Example Server Configuration File --> -<!-- Note that component elements are nested corresponding to their - parent-child relationships with each other --> - -<!-- A "Server" is a singleton element that represents the entire JVM, - which may contain one or more "Service" instances. The Server - listens for a shutdown command on the indicated port. - - Note: A "Server" is not itself a "Container", so you may not - define subcomponents such as "Valves" or "Loggers" at this level. - --> - -<Server port="8005" shutdown="SHUTDOWN"> - - <!-- Comment these entries out to disable JMX MBeans support used for the - administration web application --> - <Listener className="org.apache.catalina.core.AprLifecycleListener" /> - <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> - <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" /> - <Listener className="org.apache.catalina.storeconfig.StoreConfigLifecycleListener"/> - - <!-- Global JNDI resources --> - <GlobalNamingResources> - - <!-- Test entry for demonstration purposes --> - <Environment name="simpleValue" type="java.lang.Integer" value="30"/> - - <!-- Editable user database that can also be used by - UserDatabaseRealm to authenticate users --> - <Resource name="UserDatabase" auth="Container" - type="org.apache.catalina.UserDatabase" - description="User database that can be updated and saved" - factory="org.apache.catalina.users.MemoryUserDatabaseFactory" - pathname="conf/tomcat-users.xml" /> - - </GlobalNamingResources> - - <!-- A "Service" is a collection of one or more "Connectors" that share - a single "Container" (and therefore the web applications visible - within that Container). Normally, that Container is an "Engine", - but this is not required. - - Note: A "Service" is not itself a "Container", so you may not - define subcomponents such as "Valves" or "Loggers" at this level. - --> - - <!-- Define the Tomcat Stand-Alone Service --> - <Service name="Catalina"> - - <!-- A "Connector" represents an endpoint by which requests are received - and responses are returned. Each Connector passes requests on to the - associated "Container" (normally an Engine) for processing. - - By default, a non-SSL HTTP/1.1 Connector is established on port 8080. - You can also enable an SSL HTTP/1.1 Connector on port 8443 by - following the instructions below and uncommenting the second Connector - entry. SSL support requires the following steps (see the SSL Config - HOWTO in the Tomcat 5 documentation bundle for more detailed - instructions): - * If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or - later, and put the JAR files into "$JAVA_HOME/jre/lib/ext". - * Execute: - %JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows) - $JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix) - with a password value of "changeit" for both the certificate and - the keystore itself. - - By default, DNS lookups are enabled when a web application calls - request.getRemoteHost(). This can have an adverse impact on - performance, so you can disable it by setting the - "enableLookups" attribute to "false". When DNS lookups are disabled, - request.getRemoteHost() will return the String version of the - IP address of the remote client. - --> - - <!-- Define a non-SSL HTTP/1.1 Connector on port 8080 --> - <Connector port="8085" maxHttpHeaderSize="8192" - maxThreads="150" minSpareThreads="25" maxSpareThreads="75" - enableLookups="false" redirectPort="8443" acceptCount="100" - connectionTimeout="20000" disableUploadTimeout="true" /> - <!-- Note : To disable connection timeouts, set connectionTimeout value - to 0 --> - - <!-- Note : To use gzip compression you could set the following properties : - - compression="on" - compressionMinSize="2048" - noCompressionUserAgents="gozilla, traviata" - compressableMimeType="text/html,text/xml" - --> - - <!-- Define a SSL HTTP/1.1 Connector on port 8443 --> - <!-- - <Connector port="8443" maxHttpHeaderSize="8192" - maxThreads="150" minSpareThreads="25" maxSpareThreads="75" - enableLookups="false" disableUploadTimeout="true" - acceptCount="100" scheme="https" secure="true" - clientAuth="false" sslProtocol="TLS" /> - --> - - <!-- Define an AJP 1.3 Connector on port 8009 --> - <Connector port="8009" - enableLookups="false" redirectPort="8443" protocol="AJP/1.3" /> - - <!-- Define a Proxied HTTP/1.1 Connector on port 8082 --> - <!-- See proxy documentation for more information about using this. --> - <!-- - <Connector port="8082" - maxThreads="150" minSpareThreads="25" maxSpareThreads="75" - enableLookups="false" acceptCount="100" connectionTimeout="20000" - proxyPort="80" disableUploadTimeout="true" /> - --> - - <!-- An Engine represents the entry point (within Catalina) that processes - every request. The Engine implementation for Tomcat stand alone - analyzes the HTTP headers included with the request, and passes them - on to the appropriate Host (virtual host). --> - - <!-- You should set jvmRoute to support load-balancing via AJP ie : - <Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1"> - --> - - <!-- Define the top level container in our container hierarchy --> - <Engine name="Catalina" defaultHost="localhost"> - - <!-- The request dumper valve dumps useful debugging information about - the request headers and cookies that were received, and the response - headers and cookies that were sent, for all requests received by - this instance of Tomcat. If you care only about requests to a - particular virtual host, or a particular application, nest this - element inside the corresponding <Host> or <Context> entry instead. - - For a similar mechanism that is portable to all Servlet 2.4 - containers, check out the "RequestDumperFilter" Filter in the - example application (the source for this filter may be found in - "$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters"). - - Note that this Valve uses the platform's default character encoding. - This may cause problems for developers in another encoding, e.g. - UTF-8. Use the RequestDumperFilter instead. - - Also note that enabling this Valve will write a ton of stuff to your - logs. They are likely to grow quite large. This extensive log writing - will definitely slow down your server. - - Request dumping is disabled by default. Uncomment the following - element to enable it. --> - <!-- - <Valve className="org.apache.catalina.valves.RequestDumperValve"/> - --> - - <!-- Because this Realm is here, an instance will be shared globally --> - - <!-- This Realm uses the UserDatabase configured in the global JNDI - resources under the key "UserDatabase". Any edits - that are performed against this UserDatabase are immediately - available for use by the Realm. --> - <Realm className="org.apache.catalina.realm.UserDatabaseRealm" - resourceName="UserDatabase"/> - - <!-- Comment out the old realm but leave here for now in case we - need to go back quickly --> - <!-- - <Realm className="org.apache.catalina.realm.MemoryRealm" /> - --> - - <!-- Replace the above Realm with one of the following to get a Realm - stored in a database and accessed via JDBC --> - - <!-- - <Realm className="org.apache.catalina.realm.JDBCRealm" - driverName="org.gjt.mm.mysql.Driver" - connectionURL="jdbc:mysql://localhost/authority" - connectionName="test" connectionPassword="test" - userTable="users" userNameCol="user_name" userCredCol="user_pass" - userRoleTable="user_roles" roleNameCol="role_name" /> - --> - - <!-- - <Realm className="org.apache.catalina.realm.JDBCRealm" - driverName="oracle.jdbc.driver.OracleDriver" - connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL" - connectionName="scott" connectionPassword="tiger" - userTable="users" userNameCol="user_name" userCredCol="user_pass" - userRoleTable="user_roles" roleNameCol="role_name" /> - --> - - <!-- - <Realm className="org.apache.catalina.realm.JDBCRealm" - driverName="sun.jdbc.odbc.JdbcOdbcDriver" - connectionURL="jdbc:odbc:CATALINA" - userTable="users" userNameCol="user_name" userCredCol="user_pass" - userRoleTable="user_roles" roleNameCol="role_name" /> - --> - - <!-- Define the default virtual host - Note: XML Schema validation will not work with Xerces 2.2. - --> - <Host name="localhost" appBase="webapps" - unpackWARs="true" autoDeploy="true" - xmlValidation="false" xmlNamespaceAware="false"> - - <!-- Defines a cluster for this node, - By defining this element, means that every manager will be changed. - So when running a cluster, only make sure that you have webapps in there - that need to be clustered and remove the other ones. - A cluster has the following parameters: - - className = the fully qualified name of the cluster class - - clusterName = a descriptive name for your cluster, can be anything - - mcastAddr = the multicast address, has to be the same for all the nodes - - mcastPort = the multicast port, has to be the same for all the nodes - - mcastBindAddress = bind the multicast socket to a specific address - - mcastTTL = the multicast TTL if you want to limit your broadcast - - mcastSoTimeout = the multicast readtimeout - - mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat - - mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received - - tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes - - tcpListenAddress = the listen address (bind address) for TCP cluster request on this host, - in case of multiple ethernet cards. - auto means that address becomes - InetAddress.getLocalHost().getHostAddress() - - tcpListenPort = the tcp listen port - - tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS - has a wakup bug in java.nio. Set to 0 for no timeout - - printToScreen = true means that managers will also print to std.out - - expireSessionsOnShutdown = true means that - - useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called. - false means to replicate the session after each request. - false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager) - <% - HashMap map = (HashMap)session.getAttribute("map"); - map.put("key","value"); - %> - replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'. - * Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication. - * Synchronous means that the thread that executes the request, is also the - thread the replicates the data to the other nodes, and will not return until all - nodes have received the information. - * Asynchronous means that there is a specific 'sender' thread for each cluster node, - so the request thread will queue the replication request into a "smart" queue, - and then return to the client. - The "smart" queue is a queue where when a session is added to the queue, and the same session - already exists in the queue from a previous request, that session will be replaced - in the queue instead of replicating two requests. This almost never happens, unless there is a - large network delay. - --> - <!-- - When configuring for clustering, you also add in a valve to catch all the requests - coming in, at the end of the request, the session may or may not be replicated. - A session is replicated if and only if all the conditions are met: - 1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND - 2. a session exists (has been created) - 3. the request is not trapped by the "filter" attribute - - The filter attribute is to filter out requests that could not modify the session, - hence we don't replicate the session after the end of this request. - The filter is negative, ie, anything you put in the filter, you mean to filter out, - ie, no replication will be done on requests that match one of the filters. - The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to. - - filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI - ending with .gif and .js are intercepted. - - The deployer element can be used to deploy apps cluster wide. - Currently the deployment only deploys/undeploys to working members in the cluster - so no WARs are copied upons startup of a broken node. - The deployer watches a directory (watchDir) for WAR files when watchEnabled="true" - When a new war file is added the war gets deployed to the local instance, - and then deployed to the other instances in the cluster. - When a war file is deleted from the watchDir the war is undeployed locally - and cluster wide - --> - - <!-- - <Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster" - managerClassName="org.apache.catalina.cluster.session.DeltaManager" - expireSessionsOnShutdown="false" - useDirtyFlag="true" - notifyListenersOnReplication="true"> - - <Membership - className="org.apache.catalina.cluster.mcast.McastService" - mcastAddr="228.0.0.4" - mcastPort="45564" - mcastFrequency="500" - mcastDropTime="3000"/> - - <Receiver - className="org.apache.catalina.cluster.tcp.ReplicationListener" - tcpListenAddress="auto" - tcpListenPort="4001" - tcpSelectorTimeout="100" - tcpThreadCount="6"/> - - <Sender - className="org.apache.catalina.cluster.tcp.ReplicationTransmitter" - replicationMode="pooled" - ackTimeout="15000" - waitForAck="true"/> - - <Valve className="org.apache.catalina.cluster.tcp.ReplicationValve" - filter=".*\.gif;.*\.js;.*\.jpg;.*\.png;.*\.htm;.*\.html;.*\.css;.*\.txt;"/> - - <Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer" - tempDir="/tmp/war-temp/" - deployDir="/tmp/war-deploy/" - watchDir="/tmp/war-listen/" - watchEnabled="false"/> - - <ClusterListener className="org.apache.catalina.cluster.session.ClusterSessionListener"/> - </Cluster> - --> - - - - <!-- Normally, users must authenticate themselves to each web app - individually. Uncomment the following entry if you would like - a user to be authenticated the first time they encounter a - resource protected by a security constraint, and then have that - user identity maintained across *all* web applications contained - in this virtual host. --> - <!-- - <Valve className="org.apache.catalina.authenticator.SingleSignOn" /> - --> - - <!-- Access log processes all requests for this virtual host. By - default, log files are created in the "logs" directory relative to - $CATALINA_HOME. If you wish, you can specify a different - directory with the "directory" attribute. Specify either a relative - (to $CATALINA_HOME) or absolute path to the desired directory. - --> - <!-- - <Valve className="org.apache.catalina.valves.AccessLogValve" - directory="logs" prefix="localhost_access_log." suffix=".txt" - pattern="common" resolveHosts="false"/> - --> - - <!-- Access log processes all requests for this virtual host. By - default, log files are created in the "logs" directory relative to - $CATALINA_HOME. If you wish, you can specify a different - directory with the "directory" attribute. Specify either a relative - (to $CATALINA_HOME) or absolute path to the desired directory. - This access log implementation is optimized for maximum performance, - but is hardcoded to support only the "common" and "combined" patterns. - --> - <!-- - <Valve className="org.apache.catalina.valves.FastCommonAccessLogValve" - directory="logs" prefix="localhost_access_log." suffix=".txt" - pattern="common" resolveHosts="false"/> - --> - - </Host> - - </Engine> - - </Service> - -</Server> diff --git a/java/sca/contrib/demos/load-balancing-webapp/src/test/resources/tomcat-8085/webapps/balancer/WEB-INF/config/rules.xml b/java/sca/contrib/demos/load-balancing-webapp/src/test/resources/tomcat-8085/webapps/balancer/WEB-INF/config/rules.xml deleted file mode 100644 index 7486dc8148..0000000000 --- a/java/sca/contrib/demos/load-balancing-webapp/src/test/resources/tomcat-8085/webapps/balancer/WEB-INF/config/rules.xml +++ /dev/null @@ -1,26 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!-- - Licensed to the Apache Software Foundation (ASF) under one or more - contributor license agreements. See the NOTICE file distributed with - this work for additional information regarding copyright ownership. - The ASF licenses this file to You under the Apache License, Version 2.0 - (the "License"); you may not use this file except in compliance with - the License. You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. ---> -<rules> - <rule className="org.apache.tuscany.sca.demos.loadbalancer.rule.RoundRobinRule" - workerCount="2" - redirectUrl="http://localhost:8086" /> - - <rule className="org.apache.tuscany.sca.demos.loadbalancer.rule.RoundRobinRule" - workerCount="1" - redirectUrl="http://localhost:8087" /> -</rules> diff --git a/java/sca/contrib/demos/load-balancing-webapp/src/test/resources/tomcat-8086/conf/server.xml b/java/sca/contrib/demos/load-balancing-webapp/src/test/resources/tomcat-8086/conf/server.xml deleted file mode 100644 index 5ecb8fe5c4..0000000000 --- a/java/sca/contrib/demos/load-balancing-webapp/src/test/resources/tomcat-8086/conf/server.xml +++ /dev/null @@ -1,391 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!-- - Licensed to the Apache Software Foundation (ASF) under one or more - contributor license agreements. See the NOTICE file distributed with - this work for additional information regarding copyright ownership. - The ASF licenses this file to You under the Apache License, Version 2.0 - (the "License"); you may not use this file except in compliance with - the License. You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. ---> -<!-- Example Server Configuration File --> -<!-- Note that component elements are nested corresponding to their - parent-child relationships with each other --> - -<!-- A "Server" is a singleton element that represents the entire JVM, - which may contain one or more "Service" instances. The Server - listens for a shutdown command on the indicated port. - - Note: A "Server" is not itself a "Container", so you may not - define subcomponents such as "Valves" or "Loggers" at this level. - --> - -<Server port="8006" shutdown="SHUTDOWN"> - - <!-- Comment these entries out to disable JMX MBeans support used for the - administration web application --> - <Listener className="org.apache.catalina.core.AprLifecycleListener" /> - <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> - <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" /> - <Listener className="org.apache.catalina.storeconfig.StoreConfigLifecycleListener"/> - - <!-- Global JNDI resources --> - <GlobalNamingResources> - - <!-- Test entry for demonstration purposes --> - <Environment name="simpleValue" type="java.lang.Integer" value="30"/> - - <!-- Editable user database that can also be used by - UserDatabaseRealm to authenticate users --> - <Resource name="UserDatabase" auth="Container" - type="org.apache.catalina.UserDatabase" - description="User database that can be updated and saved" - factory="org.apache.catalina.users.MemoryUserDatabaseFactory" - pathname="conf/tomcat-users.xml" /> - - </GlobalNamingResources> - - <!-- A "Service" is a collection of one or more "Connectors" that share - a single "Container" (and therefore the web applications visible - within that Container). Normally, that Container is an "Engine", - but this is not required. - - Note: A "Service" is not itself a "Container", so you may not - define subcomponents such as "Valves" or "Loggers" at this level. - --> - - <!-- Define the Tomcat Stand-Alone Service --> - <Service name="Catalina"> - - <!-- A "Connector" represents an endpoint by which requests are received - and responses are returned. Each Connector passes requests on to the - associated "Container" (normally an Engine) for processing. - - By default, a non-SSL HTTP/1.1 Connector is established on port 8080. - You can also enable an SSL HTTP/1.1 Connector on port 8443 by - following the instructions below and uncommenting the second Connector - entry. SSL support requires the following steps (see the SSL Config - HOWTO in the Tomcat 5 documentation bundle for more detailed - instructions): - * If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or - later, and put the JAR files into "$JAVA_HOME/jre/lib/ext". - * Execute: - %JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows) - $JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix) - with a password value of "changeit" for both the certificate and - the keystore itself. - - By default, DNS lookups are enabled when a web application calls - request.getRemoteHost(). This can have an adverse impact on - performance, so you can disable it by setting the - "enableLookups" attribute to "false". When DNS lookups are disabled, - request.getRemoteHost() will return the String version of the - IP address of the remote client. - --> - - <!-- Define a non-SSL HTTP/1.1 Connector on port 8080 --> - <Connector port="8086" maxHttpHeaderSize="8192" - maxThreads="150" minSpareThreads="25" maxSpareThreads="75" - enableLookups="false" redirectPort="8443" acceptCount="100" - connectionTimeout="20000" disableUploadTimeout="true" /> - <!-- Note : To disable connection timeouts, set connectionTimeout value - to 0 --> - - <!-- Note : To use gzip compression you could set the following properties : - - compression="on" - compressionMinSize="2048" - noCompressionUserAgents="gozilla, traviata" - compressableMimeType="text/html,text/xml" - --> - - <!-- Define a SSL HTTP/1.1 Connector on port 8443 --> - <!-- - <Connector port="8443" maxHttpHeaderSize="8192" - maxThreads="150" minSpareThreads="25" maxSpareThreads="75" - enableLookups="false" disableUploadTimeout="true" - acceptCount="100" scheme="https" secure="true" - clientAuth="false" sslProtocol="TLS" /> - --> - - <!-- Define an AJP 1.3 Connector on port 8010 --> - <Connector port="8010" - enableLookups="false" redirectPort="8443" protocol="AJP/1.3" /> - - <!-- Define a Proxied HTTP/1.1 Connector on port 8082 --> - <!-- See proxy documentation for more information about using this. --> - <!-- - <Connector port="8082" - maxThreads="150" minSpareThreads="25" maxSpareThreads="75" - enableLookups="false" acceptCount="100" connectionTimeout="20000" - proxyPort="80" disableUploadTimeout="true" /> - --> - - <!-- An Engine represents the entry point (within Catalina) that processes - every request. The Engine implementation for Tomcat stand alone - analyzes the HTTP headers included with the request, and passes them - on to the appropriate Host (virtual host). --> - - <!-- You should set jvmRoute to support load-balancing via AJP ie : - <Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1"> - --> - - <!-- Define the top level container in our container hierarchy --> - <Engine name="Catalina" defaultHost="localhost"> - - <!-- The request dumper valve dumps useful debugging information about - the request headers and cookies that were received, and the response - headers and cookies that were sent, for all requests received by - this instance of Tomcat. If you care only about requests to a - particular virtual host, or a particular application, nest this - element inside the corresponding <Host> or <Context> entry instead. - - For a similar mechanism that is portable to all Servlet 2.4 - containers, check out the "RequestDumperFilter" Filter in the - example application (the source for this filter may be found in - "$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters"). - - Note that this Valve uses the platform's default character encoding. - This may cause problems for developers in another encoding, e.g. - UTF-8. Use the RequestDumperFilter instead. - - Also note that enabling this Valve will write a ton of stuff to your - logs. They are likely to grow quite large. This extensive log writing - will definitely slow down your server. - - Request dumping is disabled by default. Uncomment the following - element to enable it. --> - <!-- - <Valve className="org.apache.catalina.valves.RequestDumperValve"/> - --> - - <!-- Because this Realm is here, an instance will be shared globally --> - - <!-- This Realm uses the UserDatabase configured in the global JNDI - resources under the key "UserDatabase". Any edits - that are performed against this UserDatabase are immediately - available for use by the Realm. --> - <Realm className="org.apache.catalina.realm.UserDatabaseRealm" - resourceName="UserDatabase"/> - - <!-- Comment out the old realm but leave here for now in case we - need to go back quickly --> - <!-- - <Realm className="org.apache.catalina.realm.MemoryRealm" /> - --> - - <!-- Replace the above Realm with one of the following to get a Realm - stored in a database and accessed via JDBC --> - - <!-- - <Realm className="org.apache.catalina.realm.JDBCRealm" - driverName="org.gjt.mm.mysql.Driver" - connectionURL="jdbc:mysql://localhost/authority" - connectionName="test" connectionPassword="test" - userTable="users" userNameCol="user_name" userCredCol="user_pass" - userRoleTable="user_roles" roleNameCol="role_name" /> - --> - - <!-- - <Realm className="org.apache.catalina.realm.JDBCRealm" - driverName="oracle.jdbc.driver.OracleDriver" - connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL" - connectionName="scott" connectionPassword="tiger" - userTable="users" userNameCol="user_name" userCredCol="user_pass" - userRoleTable="user_roles" roleNameCol="role_name" /> - --> - - <!-- - <Realm className="org.apache.catalina.realm.JDBCRealm" - driverName="sun.jdbc.odbc.JdbcOdbcDriver" - connectionURL="jdbc:odbc:CATALINA" - userTable="users" userNameCol="user_name" userCredCol="user_pass" - userRoleTable="user_roles" roleNameCol="role_name" /> - --> - - <!-- Define the default virtual host - Note: XML Schema validation will not work with Xerces 2.2. - --> - <Host name="localhost" appBase="webapps" - unpackWARs="true" autoDeploy="true" - xmlValidation="false" xmlNamespaceAware="false"> - - <!-- Defines a cluster for this node, - By defining this element, means that every manager will be changed. - So when running a cluster, only make sure that you have webapps in there - that need to be clustered and remove the other ones. - A cluster has the following parameters: - - className = the fully qualified name of the cluster class - - clusterName = a descriptive name for your cluster, can be anything - - mcastAddr = the multicast address, has to be the same for all the nodes - - mcastPort = the multicast port, has to be the same for all the nodes - - mcastBindAddress = bind the multicast socket to a specific address - - mcastTTL = the multicast TTL if you want to limit your broadcast - - mcastSoTimeout = the multicast readtimeout - - mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat - - mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received - - tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes - - tcpListenAddress = the listen address (bind address) for TCP cluster request on this host, - in case of multiple ethernet cards. - auto means that address becomes - InetAddress.getLocalHost().getHostAddress() - - tcpListenPort = the tcp listen port - - tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS - has a wakup bug in java.nio. Set to 0 for no timeout - - printToScreen = true means that managers will also print to std.out - - expireSessionsOnShutdown = true means that - - useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called. - false means to replicate the session after each request. - false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager) - <% - HashMap map = (HashMap)session.getAttribute("map"); - map.put("key","value"); - %> - replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'. - * Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication. - * Synchronous means that the thread that executes the request, is also the - thread the replicates the data to the other nodes, and will not return until all - nodes have received the information. - * Asynchronous means that there is a specific 'sender' thread for each cluster node, - so the request thread will queue the replication request into a "smart" queue, - and then return to the client. - The "smart" queue is a queue where when a session is added to the queue, and the same session - already exists in the queue from a previous request, that session will be replaced - in the queue instead of replicating two requests. This almost never happens, unless there is a - large network delay. - --> - <!-- - When configuring for clustering, you also add in a valve to catch all the requests - coming in, at the end of the request, the session may or may not be replicated. - A session is replicated if and only if all the conditions are met: - 1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND - 2. a session exists (has been created) - 3. the request is not trapped by the "filter" attribute - - The filter attribute is to filter out requests that could not modify the session, - hence we don't replicate the session after the end of this request. - The filter is negative, ie, anything you put in the filter, you mean to filter out, - ie, no replication will be done on requests that match one of the filters. - The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to. - - filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI - ending with .gif and .js are intercepted. - - The deployer element can be used to deploy apps cluster wide. - Currently the deployment only deploys/undeploys to working members in the cluster - so no WARs are copied upons startup of a broken node. - The deployer watches a directory (watchDir) for WAR files when watchEnabled="true" - When a new war file is added the war gets deployed to the local instance, - and then deployed to the other instances in the cluster. - When a war file is deleted from the watchDir the war is undeployed locally - and cluster wide - --> - - <!-- - <Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster" - managerClassName="org.apache.catalina.cluster.session.DeltaManager" - expireSessionsOnShutdown="false" - useDirtyFlag="true" - notifyListenersOnReplication="true"> - - <Membership - className="org.apache.catalina.cluster.mcast.McastService" - mcastAddr="228.0.0.4" - mcastPort="45564" - mcastFrequency="500" - mcastDropTime="3000"/> - - <Receiver - className="org.apache.catalina.cluster.tcp.ReplicationListener" - tcpListenAddress="auto" - tcpListenPort="4001" - tcpSelectorTimeout="100" - tcpThreadCount="6"/> - - <Sender - className="org.apache.catalina.cluster.tcp.ReplicationTransmitter" - replicationMode="pooled" - ackTimeout="15000" - waitForAck="true"/> - - <Valve className="org.apache.catalina.cluster.tcp.ReplicationValve" - filter=".*\.gif;.*\.js;.*\.jpg;.*\.png;.*\.htm;.*\.html;.*\.css;.*\.txt;"/> - - <Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer" - tempDir="/tmp/war-temp/" - deployDir="/tmp/war-deploy/" - watchDir="/tmp/war-listen/" - watchEnabled="false"/> - - <ClusterListener className="org.apache.catalina.cluster.session.ClusterSessionListener"/> - </Cluster> - --> - - - - <!-- Normally, users must authenticate themselves to each web app - individually. Uncomment the following entry if you would like - a user to be authenticated the first time they encounter a - resource protected by a security constraint, and then have that - user identity maintained across *all* web applications contained - in this virtual host. --> - <!-- - <Valve className="org.apache.catalina.authenticator.SingleSignOn" /> - --> - - <!-- Access log processes all requests for this virtual host. By - default, log files are created in the "logs" directory relative to - $CATALINA_HOME. If you wish, you can specify a different - directory with the "directory" attribute. Specify either a relative - (to $CATALINA_HOME) or absolute path to the desired directory. - --> - <!-- - <Valve className="org.apache.catalina.valves.AccessLogValve" - directory="logs" prefix="localhost_access_log." suffix=".txt" - pattern="common" resolveHosts="false"/> - --> - - <!-- Access log processes all requests for this virtual host. By - default, log files are created in the "logs" directory relative to - $CATALINA_HOME. If you wish, you can specify a different - directory with the "directory" attribute. Specify either a relative - (to $CATALINA_HOME) or absolute path to the desired directory. - This access log implementation is optimized for maximum performance, - but is hardcoded to support only the "common" and "combined" patterns. - --> - <!-- - <Valve className="org.apache.catalina.valves.FastCommonAccessLogValve" - directory="logs" prefix="localhost_access_log." suffix=".txt" - pattern="common" resolveHosts="false"/> - --> - - </Host> - - </Engine> - - </Service> - -</Server> diff --git a/java/sca/contrib/demos/load-balancing-webapp/src/test/resources/tomcat-8087/conf/server.xml b/java/sca/contrib/demos/load-balancing-webapp/src/test/resources/tomcat-8087/conf/server.xml deleted file mode 100644 index f83c68191c..0000000000 --- a/java/sca/contrib/demos/load-balancing-webapp/src/test/resources/tomcat-8087/conf/server.xml +++ /dev/null @@ -1,391 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!-- - Licensed to the Apache Software Foundation (ASF) under one or more - contributor license agreements. See the NOTICE file distributed with - this work for additional information regarding copyright ownership. - The ASF licenses this file to You under the Apache License, Version 2.0 - (the "License"); you may not use this file except in compliance with - the License. You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. ---> -<!-- Example Server Configuration File --> -<!-- Note that component elements are nested corresponding to their - parent-child relationships with each other --> - -<!-- A "Server" is a singleton element that represents the entire JVM, - which may contain one or more "Service" instances. The Server - listens for a shutdown command on the indicated port. - - Note: A "Server" is not itself a "Container", so you may not - define subcomponents such as "Valves" or "Loggers" at this level. - --> - -<Server port="8007" shutdown="SHUTDOWN"> - - <!-- Comment these entries out to disable JMX MBeans support used for the - administration web application --> - <Listener className="org.apache.catalina.core.AprLifecycleListener" /> - <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> - <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" /> - <Listener className="org.apache.catalina.storeconfig.StoreConfigLifecycleListener"/> - - <!-- Global JNDI resources --> - <GlobalNamingResources> - - <!-- Test entry for demonstration purposes --> - <Environment name="simpleValue" type="java.lang.Integer" value="30"/> - - <!-- Editable user database that can also be used by - UserDatabaseRealm to authenticate users --> - <Resource name="UserDatabase" auth="Container" - type="org.apache.catalina.UserDatabase" - description="User database that can be updated and saved" - factory="org.apache.catalina.users.MemoryUserDatabaseFactory" - pathname="conf/tomcat-users.xml" /> - - </GlobalNamingResources> - - <!-- A "Service" is a collection of one or more "Connectors" that share - a single "Container" (and therefore the web applications visible - within that Container). Normally, that Container is an "Engine", - but this is not required. - - Note: A "Service" is not itself a "Container", so you may not - define subcomponents such as "Valves" or "Loggers" at this level. - --> - - <!-- Define the Tomcat Stand-Alone Service --> - <Service name="Catalina"> - - <!-- A "Connector" represents an endpoint by which requests are received - and responses are returned. Each Connector passes requests on to the - associated "Container" (normally an Engine) for processing. - - By default, a non-SSL HTTP/1.1 Connector is established on port 8080. - You can also enable an SSL HTTP/1.1 Connector on port 8443 by - following the instructions below and uncommenting the second Connector - entry. SSL support requires the following steps (see the SSL Config - HOWTO in the Tomcat 5 documentation bundle for more detailed - instructions): - * If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or - later, and put the JAR files into "$JAVA_HOME/jre/lib/ext". - * Execute: - %JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows) - $JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix) - with a password value of "changeit" for both the certificate and - the keystore itself. - - By default, DNS lookups are enabled when a web application calls - request.getRemoteHost(). This can have an adverse impact on - performance, so you can disable it by setting the - "enableLookups" attribute to "false". When DNS lookups are disabled, - request.getRemoteHost() will return the String version of the - IP address of the remote client. - --> - - <!-- Define a non-SSL HTTP/1.1 Connector on port 8080 --> - <Connector port="8087" maxHttpHeaderSize="8192" - maxThreads="150" minSpareThreads="25" maxSpareThreads="75" - enableLookups="false" redirectPort="8443" acceptCount="100" - connectionTimeout="20000" disableUploadTimeout="true" /> - <!-- Note : To disable connection timeouts, set connectionTimeout value - to 0 --> - - <!-- Note : To use gzip compression you could set the following properties : - - compression="on" - compressionMinSize="2048" - noCompressionUserAgents="gozilla, traviata" - compressableMimeType="text/html,text/xml" - --> - - <!-- Define a SSL HTTP/1.1 Connector on port 8443 --> - <!-- - <Connector port="8443" maxHttpHeaderSize="8192" - maxThreads="150" minSpareThreads="25" maxSpareThreads="75" - enableLookups="false" disableUploadTimeout="true" - acceptCount="100" scheme="https" secure="true" - clientAuth="false" sslProtocol="TLS" /> - --> - - <!-- Define an AJP 1.3 Connector on port 8009 --> - <Connector port="8011" - enableLookups="false" redirectPort="8443" protocol="AJP/1.3" /> - - <!-- Define a Proxied HTTP/1.1 Connector on port 8082 --> - <!-- See proxy documentation for more information about using this. --> - <!-- - <Connector port="8082" - maxThreads="150" minSpareThreads="25" maxSpareThreads="75" - enableLookups="false" acceptCount="100" connectionTimeout="20000" - proxyPort="80" disableUploadTimeout="true" /> - --> - - <!-- An Engine represents the entry point (within Catalina) that processes - every request. The Engine implementation for Tomcat stand alone - analyzes the HTTP headers included with the request, and passes them - on to the appropriate Host (virtual host). --> - - <!-- You should set jvmRoute to support load-balancing via AJP ie : - <Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1"> - --> - - <!-- Define the top level container in our container hierarchy --> - <Engine name="Catalina" defaultHost="localhost"> - - <!-- The request dumper valve dumps useful debugging information about - the request headers and cookies that were received, and the response - headers and cookies that were sent, for all requests received by - this instance of Tomcat. If you care only about requests to a - particular virtual host, or a particular application, nest this - element inside the corresponding <Host> or <Context> entry instead. - - For a similar mechanism that is portable to all Servlet 2.4 - containers, check out the "RequestDumperFilter" Filter in the - example application (the source for this filter may be found in - "$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters"). - - Note that this Valve uses the platform's default character encoding. - This may cause problems for developers in another encoding, e.g. - UTF-8. Use the RequestDumperFilter instead. - - Also note that enabling this Valve will write a ton of stuff to your - logs. They are likely to grow quite large. This extensive log writing - will definitely slow down your server. - - Request dumping is disabled by default. Uncomment the following - element to enable it. --> - <!-- - <Valve className="org.apache.catalina.valves.RequestDumperValve"/> - --> - - <!-- Because this Realm is here, an instance will be shared globally --> - - <!-- This Realm uses the UserDatabase configured in the global JNDI - resources under the key "UserDatabase". Any edits - that are performed against this UserDatabase are immediately - available for use by the Realm. --> - <Realm className="org.apache.catalina.realm.UserDatabaseRealm" - resourceName="UserDatabase"/> - - <!-- Comment out the old realm but leave here for now in case we - need to go back quickly --> - <!-- - <Realm className="org.apache.catalina.realm.MemoryRealm" /> - --> - - <!-- Replace the above Realm with one of the following to get a Realm - stored in a database and accessed via JDBC --> - - <!-- - <Realm className="org.apache.catalina.realm.JDBCRealm" - driverName="org.gjt.mm.mysql.Driver" - connectionURL="jdbc:mysql://localhost/authority" - connectionName="test" connectionPassword="test" - userTable="users" userNameCol="user_name" userCredCol="user_pass" - userRoleTable="user_roles" roleNameCol="role_name" /> - --> - - <!-- - <Realm className="org.apache.catalina.realm.JDBCRealm" - driverName="oracle.jdbc.driver.OracleDriver" - connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL" - connectionName="scott" connectionPassword="tiger" - userTable="users" userNameCol="user_name" userCredCol="user_pass" - userRoleTable="user_roles" roleNameCol="role_name" /> - --> - - <!-- - <Realm className="org.apache.catalina.realm.JDBCRealm" - driverName="sun.jdbc.odbc.JdbcOdbcDriver" - connectionURL="jdbc:odbc:CATALINA" - userTable="users" userNameCol="user_name" userCredCol="user_pass" - userRoleTable="user_roles" roleNameCol="role_name" /> - --> - - <!-- Define the default virtual host - Note: XML Schema validation will not work with Xerces 2.2. - --> - <Host name="localhost" appBase="webapps" - unpackWARs="true" autoDeploy="true" - xmlValidation="false" xmlNamespaceAware="false"> - - <!-- Defines a cluster for this node, - By defining this element, means that every manager will be changed. - So when running a cluster, only make sure that you have webapps in there - that need to be clustered and remove the other ones. - A cluster has the following parameters: - - className = the fully qualified name of the cluster class - - clusterName = a descriptive name for your cluster, can be anything - - mcastAddr = the multicast address, has to be the same for all the nodes - - mcastPort = the multicast port, has to be the same for all the nodes - - mcastBindAddress = bind the multicast socket to a specific address - - mcastTTL = the multicast TTL if you want to limit your broadcast - - mcastSoTimeout = the multicast readtimeout - - mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat - - mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received - - tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes - - tcpListenAddress = the listen address (bind address) for TCP cluster request on this host, - in case of multiple ethernet cards. - auto means that address becomes - InetAddress.getLocalHost().getHostAddress() - - tcpListenPort = the tcp listen port - - tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS - has a wakup bug in java.nio. Set to 0 for no timeout - - printToScreen = true means that managers will also print to std.out - - expireSessionsOnShutdown = true means that - - useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called. - false means to replicate the session after each request. - false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager) - <% - HashMap map = (HashMap)session.getAttribute("map"); - map.put("key","value"); - %> - replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'. - * Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication. - * Synchronous means that the thread that executes the request, is also the - thread the replicates the data to the other nodes, and will not return until all - nodes have received the information. - * Asynchronous means that there is a specific 'sender' thread for each cluster node, - so the request thread will queue the replication request into a "smart" queue, - and then return to the client. - The "smart" queue is a queue where when a session is added to the queue, and the same session - already exists in the queue from a previous request, that session will be replaced - in the queue instead of replicating two requests. This almost never happens, unless there is a - large network delay. - --> - <!-- - When configuring for clustering, you also add in a valve to catch all the requests - coming in, at the end of the request, the session may or may not be replicated. - A session is replicated if and only if all the conditions are met: - 1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND - 2. a session exists (has been created) - 3. the request is not trapped by the "filter" attribute - - The filter attribute is to filter out requests that could not modify the session, - hence we don't replicate the session after the end of this request. - The filter is negative, ie, anything you put in the filter, you mean to filter out, - ie, no replication will be done on requests that match one of the filters. - The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to. - - filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI - ending with .gif and .js are intercepted. - - The deployer element can be used to deploy apps cluster wide. - Currently the deployment only deploys/undeploys to working members in the cluster - so no WARs are copied upons startup of a broken node. - The deployer watches a directory (watchDir) for WAR files when watchEnabled="true" - When a new war file is added the war gets deployed to the local instance, - and then deployed to the other instances in the cluster. - When a war file is deleted from the watchDir the war is undeployed locally - and cluster wide - --> - - <!-- - <Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster" - managerClassName="org.apache.catalina.cluster.session.DeltaManager" - expireSessionsOnShutdown="false" - useDirtyFlag="true" - notifyListenersOnReplication="true"> - - <Membership - className="org.apache.catalina.cluster.mcast.McastService" - mcastAddr="228.0.0.4" - mcastPort="45564" - mcastFrequency="500" - mcastDropTime="3000"/> - - <Receiver - className="org.apache.catalina.cluster.tcp.ReplicationListener" - tcpListenAddress="auto" - tcpListenPort="4001" - tcpSelectorTimeout="100" - tcpThreadCount="6"/> - - <Sender - className="org.apache.catalina.cluster.tcp.ReplicationTransmitter" - replicationMode="pooled" - ackTimeout="15000" - waitForAck="true"/> - - <Valve className="org.apache.catalina.cluster.tcp.ReplicationValve" - filter=".*\.gif;.*\.js;.*\.jpg;.*\.png;.*\.htm;.*\.html;.*\.css;.*\.txt;"/> - - <Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer" - tempDir="/tmp/war-temp/" - deployDir="/tmp/war-deploy/" - watchDir="/tmp/war-listen/" - watchEnabled="false"/> - - <ClusterListener className="org.apache.catalina.cluster.session.ClusterSessionListener"/> - </Cluster> - --> - - - - <!-- Normally, users must authenticate themselves to each web app - individually. Uncomment the following entry if you would like - a user to be authenticated the first time they encounter a - resource protected by a security constraint, and then have that - user identity maintained across *all* web applications contained - in this virtual host. --> - <!-- - <Valve className="org.apache.catalina.authenticator.SingleSignOn" /> - --> - - <!-- Access log processes all requests for this virtual host. By - default, log files are created in the "logs" directory relative to - $CATALINA_HOME. If you wish, you can specify a different - directory with the "directory" attribute. Specify either a relative - (to $CATALINA_HOME) or absolute path to the desired directory. - --> - <!-- - <Valve className="org.apache.catalina.valves.AccessLogValve" - directory="logs" prefix="localhost_access_log." suffix=".txt" - pattern="common" resolveHosts="false"/> - --> - - <!-- Access log processes all requests for this virtual host. By - default, log files are created in the "logs" directory relative to - $CATALINA_HOME. If you wish, you can specify a different - directory with the "directory" attribute. Specify either a relative - (to $CATALINA_HOME) or absolute path to the desired directory. - This access log implementation is optimized for maximum performance, - but is hardcoded to support only the "common" and "combined" patterns. - --> - <!-- - <Valve className="org.apache.catalina.valves.FastCommonAccessLogValve" - directory="logs" prefix="localhost_access_log." suffix=".txt" - pattern="common" resolveHosts="false"/> - --> - - </Host> - - </Engine> - - </Service> - -</Server> |