diff options
Diffstat (limited to 'cpp/etc')
-rw-r--r-- | cpp/etc/addLicense2cpp.pl | 85 | ||||
-rw-r--r-- | cpp/etc/addLicense2cppheader.pl | 85 | ||||
-rw-r--r-- | cpp/etc/svn-config | 136 | ||||
-rw-r--r-- | cpp/etc/svn-ignore | 40 |
4 files changed, 0 insertions, 346 deletions
diff --git a/cpp/etc/addLicense2cpp.pl b/cpp/etc/addLicense2cpp.pl deleted file mode 100644 index 668b2c943d..0000000000 --- a/cpp/etc/addLicense2cpp.pl +++ /dev/null @@ -1,85 +0,0 @@ -#!/usr/bin/perl -# -# Licensed to the Apache Software Foundation (ASF) under one or more -# contributor license agreements. See the NOTICE file distributed with -# this work for additional information regarding copyright ownership. -# The ASF licenses this file to You under the Apache License, Version 2.0 -# (the "License"); you may not use this file except in compliance with -# the License. You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -#=================================================================== -# Change the old license header to remove the copyright ASF line -# and replace it with the new "Licensed under the ..." text. -# Note that this should not be applied to the collective copyright -# in, for example, a README file that describes the work as a whole. -#=================================================================== -# -# Usage: newlicense.pl *.java -# or -# find . -name .svn -prune -o -type f -print0 | xargs -0 copy2license.pl -# -sub ShowUsage { - print qq! -Usage: $0 file [ file ... ] - - where: - - file = a file in which to substitute license text - -!; -} -#=================================================================== - -# ensure proper usage -if (scalar @ARGV < 1) { - ShowUsage(); - exit; -} - -undef $/; # slurp the whole file - -$newtext = <<"EOTEXT"; -/* - * Licensed to the Apache Software Foundation (ASF) under one - * or more contributor license agreements. See the NOTICE file - * distributed with this work for additional information - * regarding copyright ownership. The ASF licenses this file - * to you under the Apache License, Version 2.0 (the - * "License"); you may not use this file except in compliance - * with the License. You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, - * software distributed under the License is distributed on an - * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY - * KIND, either express or implied. See the License for the - * specific language governing permissions and limitations - * under the License. - */ -EOTEXT - -# process each filename that was supplied -while ($filename = shift) { - open(INFILE, $filename) || die ("Cannot read from $filename, $!\n"); - $wholething = <INFILE>; - close INFILE; - - if ($wholething =~ s/\A.*?#include /${newtext}#include /s) { - open(OUTFILE, ">$filename") || die ("Cannot write to $filename, $!\n"); - print OUTFILE $wholething; - close OUTFILE; - } -} - -$/ = "\n"; # reset the input record separator - -exit 0; diff --git a/cpp/etc/addLicense2cppheader.pl b/cpp/etc/addLicense2cppheader.pl deleted file mode 100644 index 4e347605f6..0000000000 --- a/cpp/etc/addLicense2cppheader.pl +++ /dev/null @@ -1,85 +0,0 @@ -#!/usr/bin/perl -# -# Licensed to the Apache Software Foundation (ASF) under one or more -# contributor license agreements. See the NOTICE file distributed with -# this work for additional information regarding copyright ownership. -# The ASF licenses this file to You under the Apache License, Version 2.0 -# (the "License"); you may not use this file except in compliance with -# the License. You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -#=================================================================== -# Change the old license header to remove the copyright ASF line -# and replace it with the new "Licensed under the ..." text. -# Note that this should not be applied to the collective copyright -# in, for example, a README file that describes the work as a whole. -#=================================================================== -# -# Usage: newlicense.pl *.java -# or -# find . -name .svn -prune -o -type f -print0 | xargs -0 copy2license.pl -# -sub ShowUsage { - print qq! -Usage: $0 file [ file ... ] - - where: - - file = a file in which to substitute license text - -!; -} -#=================================================================== - -# ensure proper usage -if (scalar @ARGV < 1) { - ShowUsage(); - exit; -} - -undef $/; # slurp the whole file - -$newtext = <<"EOTEXT"; -/* - * Licensed to the Apache Software Foundation (ASF) under one - * or more contributor license agreements. See the NOTICE file - * distributed with this work for additional information - * regarding copyright ownership. The ASF licenses this file - * to you under the Apache License, Version 2.0 (the - * "License"); you may not use this file except in compliance - * with the License. You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, - * software distributed under the License is distributed on an - * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY - * KIND, either express or implied. See the License for the - * specific language governing permissions and limitations - * under the License. - */ -EOTEXT - -# process each filename that was supplied -while ($filename = shift) { - open(INFILE, $filename) || die ("Cannot read from $filename, $!\n"); - $wholething = <INFILE>; - close INFILE; - - if ($wholething =~ s/\A.*?#ifndef /${newtext}#ifndef /s) { - open(OUTFILE, ">$filename") || die ("Cannot write to $filename, $!\n"); - print OUTFILE $wholething; - close OUTFILE; - } -} - -$/ = "\n"; # reset the input record separator - -exit 0; diff --git a/cpp/etc/svn-config b/cpp/etc/svn-config deleted file mode 100644 index 4f8cb41685..0000000000 --- a/cpp/etc/svn-config +++ /dev/null @@ -1,136 +0,0 @@ -### This file configures various client-side behaviors. -### -### The commented-out examples below are intended to demonstrate -### how to use this file. - -### Section for authentication and authorization customizations. -[auth] -### Set store-passwords to 'no' to avoid storing passwords in the -### auth/ area of your config directory. It defaults to 'yes'. -### Note that this option only prevents saving of *new* passwords; -### it doesn't invalidate existing passwords. (To do that, remove -### the cache files by hand as described in the Subversion book.) -# store-passwords = no -### Set store-auth-creds to 'no' to avoid storing any subversion -### credentials in the auth/ area of your config directory. -### It defaults to 'yes'. Note that this option only prevents -### saving of *new* credentials; it doesn't invalidate existing -### caches. (To do that, remove the cache files by hand.) -# store-auth-creds = no - -### Section for configuring external helper applications. -[helpers] -### Set editor to the command used to invoke your text editor. -### This will override the environment variables that Subversion -### examines by default to find this information ($EDITOR, -### et al). -# editor-cmd = editor (vi, emacs, notepad, etc.) -### Set diff-cmd to the absolute path of your 'diff' program. -### This will override the compile-time default, which is to use -### Subversion's internal diff implementation. -# diff-cmd = diff_program (diff, gdiff, etc.) -### Set diff3-cmd to the absolute path of your 'diff3' program. -### This will override the compile-time default, which is to use -### Subversion's internal diff3 implementation. -# diff3-cmd = diff3_program (diff3, gdiff3, etc.) -### Set diff3-has-program-arg to 'true' or 'yes' if your 'diff3' -### program accepts the '--diff-program' option. -# diff3-has-program-arg = [true | false] - -### Section for configuring tunnel agents. -[tunnels] -### Configure svn protocol tunnel schemes here. By default, only -### the 'ssh' scheme is defined. You can define other schemes to -### be used with 'svn+scheme://hostname/path' URLs. A scheme -### definition is simply a command, optionally prefixed by an -### environment variable name which can override the command if it -### is defined. The command (or environment variable) may contain -### arguments, using standard shell quoting for arguments with -### spaces. The command will be invoked as: -### <command> <hostname> svnserve -t -### (If the URL includes a username, then the hostname will be -### passed to the tunnel agent as <user>@<hostname>.) If the -### built-in ssh scheme were not predefined, it could be defined -### as: -# ssh = $SVN_SSH ssh -### If you wanted to define a new 'rsh' scheme, to be used with -### 'svn+rsh:' URLs, you could do so as follows: -# rsh = rsh -### Or, if you wanted to specify a full path and arguments: -# rsh = /path/to/rsh -l myusername -### On Windows, if you are specifying a full path to a command, -### use a forward slash (/) or a paired backslash (\\) as the -### path separator. A single backslash will be treated as an -### escape for the following character. - -### Section for configuring miscelleneous Subversion options. -[miscellany] -### Set global-ignores to a set of whitespace-delimited globs -### which Subversion will ignore in its 'status' output. -# global-ignores = *.o *.lo *.la #*# .*.rej *.rej .*~ *~ .#* .DS_Store -### Set log-encoding to the default encoding for log messages -# log-encoding = latin1 -### Set use-commit-times to make checkout/update/switch/revert -### put last-committed timestamps on every file touched. -# use-commit-times = yes -### Set no-unlock to prevent 'svn commit' from automatically -### releasing locks on files. -# no-unlock = yes -### Set enable-auto-props to 'yes' to enable automatic properties -### for 'svn add' and 'svn import', it defaults to 'no'. -### Automatic properties are defined in the section 'auto-props'. -enable-auto-props = yes - -### Section for configuring automatic properties. -[auto-props] -### The format of the entries is: -### file-name-pattern = propname[=value][;propname[=value]...] -### The file-name-pattern can contain wildcards (such as '*' and -### '?'). All entries which match will be applied to the file. -### Note that auto-props functionality must be enabled, which -### is typically done by setting the 'enable-auto-props' option. -# *.c = svn:eol-style=native -# *.cpp = svn:eol-style=native -# *.h = svn:eol-style=native -# *.dsp = svn:eol-style=CRLF -# *.dsw = svn:eol-style=CRLF -# *.sh = svn:eol-style=native;svn:executable -# *.txt = svn:eol-style=native -# *.png = svn:mime-type=image/png -# *.jpg = svn:mime-type=image/jpeg -# Makefile = svn:eol-style=native - -*.c = svn:eol-style=native;svn:keywords=Rev Date -*.cpp = svn:eol-style=native;svn:keywords=Rev Date -*.h = svn:eol-style=native;svn:keywords=Rev Date -*.dsp = svn:eol-style=CRLF -*.dsw = svn:eol-style=CRLF -*.sh = svn:eol-style=native;svn:executable;svn:keywords=Rev Date -*.bat = svn:eol-style=native;svn:keywords=Rev Date -*.txt = svn:eol-style=native;svn:keywords=Rev Date -*.png = svn:mime-type=image/png -*.jpg = svn:mime-type=image/jpeg -*.am = svn:eol-style=native;svn:keywords=Rev Date -*.ac = svn:eol-style=native;svn:keywords=Rev Date -*.xml = svn:eol-style=native;svn:keywords=Rev Date -*.xsd = svn:eol-style=native;svn:keywords=Rev Date -*.html = svn:eol-style=native;svn:keywords=Rev Date -*.wsdl = svn:eol-style=native;svn:keywords=Rev Date -*.xsd = svn:eol-style=native;svn:keywords=Rev Date -*.composite = svn:eol-style=native;svn:keywords=Rev Date -*.componentType = svn:eol-style=native;svn:keywords=Rev Date -*.rb = svn:eol-style=native;svn:keywords=Rev Date -*.py = svn:eol-style=native;svn:keywords=Rev Date -*.php = svn:eol-style=native;svn:keywords=Rev Date -*.js = svn:eol-style=native;svn:keywords=Rev Date -*.java = svn:eol-style=native;svn:keywords=Rev Date -*.properties = svn:eol-style=native;svn:keywords=Rev Date -*.jelly = svn:eol-style=native;svn:keywords=Rev Date -*.ipr = svn:eol-style=native -*.iml = svn:eol-style=native -*.project = svn:eol-style=native -*.classpath = svn:eol-style=native -README = svn:eol-style=native;svn:keywords=Rev Date -LICENSE = svn:eol-style=native -NOTICE = svn:eol-style=native - diff --git a/cpp/etc/svn-ignore b/cpp/etc/svn-ignore deleted file mode 100644 index cf9bd507e4..0000000000 --- a/cpp/etc/svn-ignore +++ /dev/null @@ -1,40 +0,0 @@ -configure -Makefile.in -config.log -depcomp -config.guess -config.h -config.sub -ltmain.sh -Makefile -config.status -stamp-h1 -config.h.in -libtool -autom4te.cache -missing -aclocal.m4 -install-sh -.deps -*.dat -.libs -tmp -build -.project -.cdtproject -.settings -*_Proxy.cpp -*_Proxy.h -*_Wrapper.cpp -*_Wrapper.h -.pydevproject -*.lib -*.dll -*.exe -*.suo -*.ncb -*.user -*.pdb -Debug -Release -gmon.out |